FeiyuTech SCORP C2

Contents

FeiyuTech SCORP C2 Camera Gimbal Stabilizer User Manual

Model: SCORP C2

1. Introduction

The FeiyuTech SCORP C2 is a versatile 3-axis handheld gimbal stabilizer designed for DSLR and mirrorless cameras. It features an integrated sling handle, upgraded AI tracking 4.0, gesture control, and a powerful 3.5kg payload capacity. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.

Video: Overview of the FeiyuTech SCORP C2 Gimbal, demonstrating its features and ease of use.

2. What's in the Box

Ensure all the following items are included in your package:

  • Main body (Feiyu Scorp-C 2 Gimbal) x1
  • Tripod x1
  • Fixed plate x1
  • Upper Quick Release Plate x1
  • Quick Release Plate x1
  • Slider x1
  • L-Bracket Base (Horizontal Mount Plate) x1
  • Camera fixed screw x1
  • Lens holder x1
  • Lens holder screw x1
  • Hex Key x1
  • USB-C to Type-C Camera Control Cable x1
  • USB-C Gimbal Charging Cable x1
  • User Manual x1
Diagram of FeiyuTech SCORP C2 components in the box

Image: Diagram showing all components included in the FeiyuTech SCORP C2 package.

3. Overview of Components

Familiarize yourself with the various parts of your SCORP C2 gimbal:

Diagram of FeiyuTech SCORP C2 gimbal components with numbered labels

Image: Detailed diagram of the SCORP C2 gimbal highlighting its various parts.

  1. Power button
  2. Photo/video button
  3. F2 button
  4. Screen
  5. Shutter button
  6. Mode button
  7. Joystick
  8. R button
  9. Auto rotation button
  10. L button
  11. F1 button
  12. 1/4 inch thread hole
  13. Knob function switching button
  14. Multifunction knob
  15. Roll lock
  16. Indicator
  17. Roll axis
  18. Cross arm
  19. Focus motor port 2
  20. Extension port
  21. Fixed plate
  22. Quick release plate
  23. Upper quick release plate
  24. Tilt lock
  25. Roll axis
  26. AI tracking camera
  27. AI tracking indicator
  28. Camera control port/USB-C power output port
  29. Focus motor port 1
  30. Versatile arm
  31. Pan axis
  32. Pan lock
  33. A/B button
  34. Trigger button

4. Setup

4.1 Charging the Gimbal

Before initial use, fully charge the gimbal battery. Use the provided USB-C cable for charging. The gimbal supports quick charge.

Diagram showing USB-C charging port on the gimbal

Image: Illustration of the gimbal's charging port.

4.2 Adjusting the Gimbal to Balancing Position

The gimbal comes in a folded position for storage. Adjust it to the balancing position before mounting your camera.

Diagram showing how to unfold the gimbal from folded to balancing position

Image: Steps to transition the gimbal from folded to balancing position.

4.3 Mounting the Shooting Equipment

Ensure your camera and accessories are within the gimbal's load requirements (max 3500g). The gimbal must be powered off or in sleep mode before mounting the camera.

  1. Attach the Upper Quick Release Plate

    Tighten the upper quick release plate to your camera with the screw. If your camera lacks a 1/4-20 inch screw hole, use a mount adapter.

    Image showing camera attached to upper quick release plate

    Image: Camera mounted on the upper quick release plate.

  2. Mounting Fixed Plate

    Unlock the fixed plate lock, slide the fixed plate into the slot, and then lock it.

    Diagram showing how to mount the fixed plate

    Image: Steps for mounting the fixed plate onto the gimbal.

  3. Mounting Quick Release Plate

    Unlock the quick release plate lock, slide the quick release plate into the slot, and then lock it.

    Diagram showing how to mount the quick release plate

    Image: Steps for mounting the quick release plate onto the gimbal.

  4. Mount Camera on Gimbal

    Unlock the upper quick release plate lock, slide the camera (with the upper quick release plate attached) into the slot, and then lock it.

    Diagram showing how to mount the camera onto the gimbal

    Image: Steps for mounting the camera onto the gimbal.

  5. Install Lens Holder (Optional)

    If using a long or heavy lens, install the lens holder on the quick release plate. Ensure the rubber of the lens holder is directly under the lens.

    Diagram showing how to install the lens holder

    Image: Illustration of installing the optional lens holder.

4.4 Gimbal Balancing

Proper balancing is crucial for optimal performance. Hold up the camera first, then move the slide arm, cross arm, and vertical arm to balance.

4.4.1 Balancing the Tilt Axis

  1. Unlock motor lock A and secure motor locks B and C.
  2. Position the camera lens vertically upward.
  3. Unlock the tilt lock, move the camera in the opposite direction of the lens tilt until the lens remains vertically upward.
  4. Lock the tilt lock, supporting the camera upward to ensure proper fixation.
  5. Place the camera lens pointing horizontally forward.
  6. Unlock the tilt lock, move the camera in the opposite direction of the lens tilt until the lens remains horizontally forward.
  7. Lock the tilt lock, supporting the camera to ensure proper fixation.

If the camera remains stationary at a tilt angle of about ±45°, the tilt axis is balanced.

4.4.2 Balancing the Roll Axis

  1. Unlock motor lock B and secure motor locks A and C. Observe the camera's tilt direction.
  2. Unlock the roll lock, move the camera in the opposite direction of the lens tilt until the cross arm remains level.
  3. Lock the roll lock.

If the camera remains stationary at a horizontal angle, the roll axis is balanced.

4.4.3 Balancing the Pan Axis

  1. Unlock motor lock C and secure motor locks A and B. Hold the handle and tilt the device to observe the camera's tilt direction.
  2. Unlock the pan lock, move the camera in the opposite direction of the lens tilt until the vertical arm stays still.
  3. Lock the pan lock.

If the camera remains stationary at a horizontal angle, the pan axis is balanced.

5. Operation

5.1 Power ON/OFF

Before powering on, ensure the gimbal is balanced and all three axes are unlocked. If axes are locked, the gimbal will enter sleep mode. Single tap the power button to wake it up after unlocking.

Long press the power button until you hear a beep sound to power ON/OFF.

5.2 Follow Mode Introduction

OSD Mode Introduction
PF PF mode Pan follow, only the pan axis follows the movement of user's hand.
PTF PTF mode Pan and tilt follow, where both the pan and tilt axes follow the movement of user's hand, but roll axis does not.
FPV FPV mode Pan, tilt and roll follow, where all 3 axes follow the movement of user's hand.
AL Lock mode All 3 axes do not follow the movement of user's hand, gimbal keeps the direction of the camera fixed.
FFW FFW mode Flash follow, where all 3 axes follow the movement of user's hand in high follow speed.

5.3 Button Operation

  • Power Button

    Long press: Power on/Power off
    Single tap: (1) Wake up (In sleep mode) (2) Display battery levels of the gimbal (When powered off)
    Double tap: Enter sleep mode

  • M Button

    Single tap: PF mode (Default) /PTF/FPV (Switch in turn)
    Double tap: Recenter
    Long press for 3 seconds: Enter the auto tune
    Tap five times: Horizon calibration

  • Joystick

    Push: (1) Control the movement of the tilt and pan axes. (2) Control album (3) Framing Adjustment (While AI Tracking)

  • Shutter Button (Camera Connected)

    Press half way: Focus
    Single tap (Fully): Start/stop recording
    Long press (Fully): Take photo

  • Auto Rotation Button

    Single tap: Enter auto rotation mode
    Single tap again: (1) Exit auto rotation mode (When gimbal is not rotating) (2) Pause the rotation (When gimbal is rotating)

  • L Button

    Single tap: Turn left continuously
    Single tap again: Switch rotating speed (Slow/Med/Fast cyclically, preset speed is Med). Active in auto rotation mode.

  • R Button

    Single tap: Turn right continuously
    Single tap again: Switch rotating speed (Slow/Med/Fast cyclically, preset speed is Med). Active in auto rotation mode.

  • F1 Button

    Single tap: Enter/exit album
    Double tap: Enter/exit portrait mode
    Triple Tap: AI power on/off
    Long Press: Enter/Exit AI tracking (With AI Power enabled)

  • F2 Button

    Double tap: Enter FFW mode

  • Trigger Button

    Double tap: Recenter (non-selfie mode) / Selfie recenter (selfie mode)
    Triple tap: Enter/Exit selfie mode (Pan axis turn 180°)
    Press and hold: Lock mode (Release to exit)
    You can customize this function via the App.

  • FPV Button

    Single tap: Enter FPV mode

5.4 Key Combinations

  • Joystick down + triple tap F2 button: Clears all Bluetooth pairing information for the smartphone.
  • Joystick up + triple tap F2 button: Clears all Bluetooth pairing information for the mirrorless camera.
  • Knob function switching button + FPV button: Press together to force the main body to power off within 1 second.

5.5 AI Tracking and Gesture Control

Under AI Power-On State, the gimbal offers advanced tracking and gesture controls:

  • OK Gesture (Left or right hand): Start tracking/Stop tracking

    Start tracking with a green light. Repeat the gesture to stop tracking, entering standby mode with a red light. Gestures must be separated by 3 seconds.

  • Thumbs Opposite Direction: Stop tracking

    Stop tracking, enter standby mode with a red light.

  • Spread Palm (Left or right hand): Shutter

    In photo/video mode, take a photo or start recording after a 3-second countdown with a beep. Repeat the gesture to stop recording.

  • Double L-Shaped Gestures: Custom framing

    Start framing with a fast-blinking green light. Once the subject is in position, repeat the gesture to complete framing, and the green light will stay on.

  • Two Thumbs Up Gesture: Disable gesture control

    In tracking mode, this gesture disables gesture control. AI tracking can still be controlled via buttons.

Diagram illustrating various hand gestures for gimbal control

Image: Visual guide to AI gesture controls for the SCORP C2.

5.6 Indicator Lights

The gimbal features indicator lights to provide status information:

  • Follow Status Indicator: Indicates which axis (Tilt, Roll, Pan) is following the user's hand movement.
  • Camera/Bluetooth Indicator: Shows connection status.
  • Battery Indicator:
    • Green light: Power on / Charging complete
    • Red light: Charging
    • Red light flashing rapidly: Low power, will auto power off
    • Light off: Power off

6. User Tips

  • Always Balance Properly: For the best stability and smooth footage, ensure your camera setup is perfectly balanced on all three axes before powering on the gimbal.
  • Check Compatibility: Before use, always refer to the official camera and lens compatibility list on the FeiyuTech website to ensure full functionality with your specific gear.
  • Utilize AI Tracking: The upgraded AI tracking is highly effective. Experiment with gesture controls for hands-free operation, especially for vlogging or solo shoots.
  • Ergonomics for Comfort: The integrated sling handle is designed to reduce fatigue. Adjust your grip and shooting style to take advantage of its ergonomic design for extended shoots.
  • Firmware Updates: Keep your gimbal's firmware updated via the Feiyu SCORP App for new features and improved performance.

7. Specifications

Feature Detail
Product NameFeiyu SCORP-C 2 Handheld Gimbal for Camera
Product ModelFeiyuSC2
Max. Tilt Range+120°~-200° (±3°)
Max. Roll Range+75°~-245° (±3°)
Max. Pan Range360°
Weight (main body)About 1320g (Not including tripod)
Payload CapabilityAbout 3500g (Well-balanced)
Battery Life≤14 Hours (Motion State)
Battery Capacity4500mAh
Operating Voltage6.8V-8.4V
CommunicationBluetooth, Wired
APP Supported LanguagesJapanese, French, German, Spanish, Korean, Brazilian Portuguese, English, Simplified Chinese, Russian
Size299.1*66*252.7mm
MaterialsSynthetic macromolecular resin, aluminum alloy
Charging Time≤3h (Using 18W fast charger)
APPFeiyu SCORP

8. Camera and Lens Compatibility

The FeiyuTech SCORP C2 is compatible with a wide range of cameras from Sony, Canon, Nikon, Panasonic, and Fujifilm. For specific camera and lens compatibility, please refer to the detailed compatibility lists below or visit the official FeiyuTech website: https://www.feiyu-tech.com/feiyu-scorp-c-2/down.html

8.1 Canon Camera Compatibility List

Canon Camera Compatibility List for FeiyuTech SCORP C2

Image: Table detailing compatible Canon cameras and lenses.

8.2 Nikon / Sigma / BMPCC Camera Compatibility List

Nikon, Sigma, and BMPCC Camera Compatibility List for FeiyuTech SCORP C2

Image: Table detailing compatible Nikon, Sigma, and BMPCC cameras and lenses.

8.3 Panasonic / Fujifilm Camera Compatibility List

Panasonic and Fujifilm Camera Compatibility List for FeiyuTech SCORP C2

Image: Table detailing compatible Panasonic and Fujifilm cameras and lenses.

8.4 SONY Camera Compatibility List

SONY Camera Compatibility List for FeiyuTech SCORP C2

Image: Table detailing compatible SONY cameras and lenses.

9. Maintenance

9.1 Storage and Maintenance

  • Keep the product out of the reach of children and pets.
  • DO NOT leave the product near heat sources such as a furnace or heater, or inside a vehicle on hot days.
  • Store the product in a dry environment.
  • DO NOT overcharge or overuse the battery. If not used for a long time, charge it at least once within one month.
  • Never use the product when the temperature is too high or too low.

10. Troubleshooting

  • Gimbal enters sleep mode: Ensure all three axes are unlocked before powering on. Single tap the power button to wake up the gimbal after unlocking.
  • Motor spinning blocked: Make sure motor spinning is not blocked by external force when the product is powered on.
  • Product contact with water/liquid: If the product is not marked waterproof or splash-proof, DO NOT allow it to contact water or other liquids, especially sea water or corrosive liquids.
  • Abnormal operation after disassembly: DO NOT disassemble the product except for marked detachable parts. If accidental disassembly causes abnormal work, send it to FeiyuTech after-sales or an authorized service center for repair. User bears relevant costs.
  • Overheating: Prolonged continuous operation may cause the product surface temperature to rise. Operate carefully.
  • Damage from impact: DO NOT drop or strike the product. If abnormal, contact Feiyu After-sales support.
  • Battery issues: Avoid overcharging or overusing the battery to prevent damage to the battery core.

11. Safety Notices

Warning: Please read the user manual carefully before use. Improper use of this product may cause damage and pose a risk to your safety.

  • Make sure motor spinning is not blocked by external force when the product is power on.
  • The product DO NOT contact water or other liquid if the product is not mark waterproof or splash-proof. Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
  • DO NOT disassembly the product except marked detachable. It need send to Feiyu Tech after-sales or authorized service center to fix it if you accidently disassembly and cause abnormal work. The relevant costs are borne by user.
  • Prolonged continuous operation may cause the product surface temperature to rise, please operate carefully.
  • DO NOT drop or strike the product. If the product is abnormal, contact Feiyu After-sales support.

12. Warranty and Support

For technical support, warranty information, or any inquiries, please contact FeiyuTech directly:

This document is subject to change without notice. For the latest user manual and updates, please visit the official website.

A PDF version of the user manual is available for download: FeiyuTech SCORP C2 User Manual (PDF)

13. Regulatory Information

13.1 IC Warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

  1. l'appareil ne doit pas produire de brouillage, et
  2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

13.2 IC Radiation Exposure Statement

This equipment complies with the limits of exposure to IC radiation defined for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements de la IC établies pour unenvironnement non contrôé.

13.3 FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

13.4 RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

© 2024 FeiyuTech. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.