Introduction
The Ac Pro HCT-378 is an advanced 3-outlet digital garden water timer designed to automate your irrigation system. Featuring independent zone control, a large LCD display, and functions like rain delay and manual watering, it provides precise and efficient watering for various applications, including gardens, lawns, greenhouses, and potted plants. This manual will guide you through the installation, programming, and maintenance of your water timer to ensure optimal performance and water conservation.
Safety Information
- This device is intended for outdoor use with cold water only.
- Do not immerse the timer in water.
- Use only 2 x 1.5V 'AA' Alkaline batteries. Do not mix old and new batteries or different types of batteries.
- Remove batteries if the timer will not be used for an extended period or during freezing temperatures.
- Keep out of reach of children.
- Ensure all connections are tight to prevent leaks.
Package Contents
- 1 x HCT-378 3-Outlet Digital Garden Water Timer
- 1 x 1/2" Adapter (if applicable for your region)
- 1 x O-ring
- 1 x Quick Connector

Note: The HCT-378-BS version is suitable for countries other than the United States, Canada, and Mexico.
Specifications
| Attribute | Specification |
|---|---|
| Model Number | HCT-378 |
| Material | ABS+Nylon (Plastic) |
| Working Temperature | 1-45°C |
| Waterproof Level | IPX5 |
| Working Pressure | 0.05-0.8mpa |
| Power Supply | 2 x 1.5V 'AA' Alkaline Batteries (Not Included) |
| Dimensions (H x W x D) | 12.7cm (5in) x 13.8cm (5.43in) x 7cm (2.76in) |


Setup
1. Battery Installation
- Locate the battery compartment on the back of the timer.
- Open the compartment cover.
- Insert two (2) new 1.5V 'AA' Alkaline batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely. The LCD screen should power on.
2. Connecting to Faucet
- Ensure the faucet is turned off.
- Thread the timer's top connector onto your outdoor faucet. Hand-tighten only.
- If necessary, use the provided 1/2" adapter for smaller faucet sizes. Ensure the O-ring is properly seated to prevent leaks.
- Turn on the faucet fully to ensure adequate water pressure to the timer.
3. Connecting Hoses/Sprinklers
- Attach your garden hoses or irrigation lines to the three independent outlets (A, B, C) at the bottom of the timer.
- Use the quick connector if your hoses are compatible.
- Ensure all connections are secure.

Operating Instructions
Understanding the Display and Controls
The HCT-378 features a large LCD screen and an intuitive dial for easy programming.

- NOW: Displays current time.
- START TIME: The programmed time for watering to begin.
- HOW LONG: Duration of watering cycle.
- HOW OFTEN: Frequency of watering cycle.
- NEXT START: Time until the next scheduled watering cycle.
- A/B/C: Buttons to select and program individual outlets.
- ESC/OFF: Exits current setting or turns off the timer.
- OK/Button: Confirms selection or enters programming mode.
- +/- Button/Delay: Adjusts values up/down or activates rain delay.
- Manual Button: Initiates manual watering.
- Child Lock: Prevents accidental changes to settings.
1. Setting the Clock
- Press the OK button to enter setting mode.
- Use the +/- buttons to adjust the current time.
- Press OK to confirm and move to the next setting (e.g., AM/PM).
- Repeat until the current time is set. Press ESC to exit.
2. Programming Watering Cycles (Independent Zone Control)
Each of the three outlets (A, B, C) can be programmed independently.
- Select the desired outlet (A, B, or C) by pressing its respective button.
- Press OK to enter programming mode for that outlet.
- Set START TIME: Use +/- to adjust the desired start time for watering. Press OK.
- Set HOW LONG (Watering Duration): Use +/- to set the duration from 1 second to 360 minutes. Press OK.
- Set HOW OFTEN (Watering Frequency): Use +/- to set the frequency from 1 hour to 15 days. Press OK.
- Repeat for each outlet (A, B, C) as needed. Press ESC to exit programming mode.

3. Manual Watering
To water immediately without affecting your programmed schedule:
- Press the Manual button.
- Use the +/- buttons to set the desired manual watering duration (e.g., 1-50 minutes).
- Press OK to start manual watering. The timer will automatically shut off after the set duration.
- To stop manual watering early, press ESC/OFF.

4. Rain Delay Function
To prevent over-watering after rainfall:
- Press and hold the DELAY button (often combined with the + button).
- Use the +/- buttons to select the desired delay period (e.g., 24, 48, 72 hours).
- Press OK to confirm. The timer will pause all scheduled watering for the selected period and resume automatically afterward.

5. Child Lock
To prevent accidental changes to your settings, activate the child lock feature (refer to the specific icon on the timer, usually a padlock symbol). Press and hold the designated button (often the OK button or a dedicated lock button) for a few seconds until the lock icon appears on the display.
Maintenance
- Cleaning: Periodically clean the timer's exterior with a damp cloth. Do not use abrasive cleaners or solvents.
- Filter Cleaning: The timer includes an anti-blocking filter. Regularly check and clean the filter screen located at the water inlet to prevent debris from affecting performance.
- Battery Replacement: Replace batteries when the low battery indicator appears on the display. Always use fresh alkaline batteries.
- Winterization: Before the first frost, disconnect the timer from the faucet and hoses. Remove the batteries. Store the timer indoors in a dry, frost-free location to prevent damage from freezing water.
Troubleshooting
- Timer not turning on: Check battery installation and ensure batteries are fresh.
- No water flow: Ensure the faucet is fully open. Check for blockages in the filter or hoses. Verify that the watering program is correctly set and not in rain delay mode.
- Leaking connections: Ensure all connections are hand-tightened and that O-rings are properly seated and not damaged.
- Inaccurate timing: Re-check the programmed start time, duration, and frequency settings. Ensure the current time is set correctly.
- Timer not responding to buttons: Check if the child lock function is activated. Deactivate it if necessary.
User Tips
- For optimal battery life, use high-quality alkaline batteries.
- When setting up multiple zones, consider the specific water needs of each area (e.g., delicate flowers vs. established lawn).
- Utilize the rain delay feature to avoid overwatering and save water during rainy periods.
- If you need to water manually for a short period, use the manual watering function to avoid disrupting your programmed schedule.
- Regularly check the battery indicator to ensure uninterrupted operation.
Warranty and Support
Your Ac Pro HCT-378 Digital Garden Water Timer is designed for durability and reliable performance. For any issues or questions not covered in this manual, please refer to the seller's support channels. Keep your purchase receipt for warranty claims.