1. Product Overview
The FDIK 12V 5KW Diesel Water Heater is a hydronic heating system designed to provide efficient and reliable heating for various applications, primarily vehicles. It operates by heating the coolant water from the vehicle's tank, circulating it to the heat exchanger to warm the interior. This unit features an LCD control for easy operation and monitoring.

Figure 1: FDIK 12V 5KW Diesel Water Heater Main Unit
2. How It Works
The FDIK hydronic heater functions by circulating and heating the vehicle's coolant. The process is as follows:
- Fuel is supplied from the vehicle's tank to the heater.
- A fuel-air mixture is ignited within the combustion chamber.
- The cold coolant water from the vehicle is heated by the combustion process inside the heater.
- The heated water, driven by a circulation pump, flows to the heat exchanger of the vehicle's own heating system.
- Once a specific temperature (approximately 80 °C) is reached, the heater automatically shuts off. The circulation pump continues to run to maintain interior heating.

Figure 2: Internal Working Principle Diagram
3. Package Contents
Please check the package carefully to ensure all components are present and undamaged:

Figure 3: Complete Kit Components
- FDIK 12V 5KW Water Heater Main Unit
- LCD Switch Control Panel
- Remote Control
- Silencer
- Oil Pump (Fuel Pump)
- Water Pump (Circulation Pump)
- Hoses and Pipes (Water, Air, Fuel)
- Air Filter
- Wire Harness
- Oil Pump Clamp
- Screw Accessories Kit
- Exhaust Pipe
- Fixed Plate
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your FDIK water heater. It is recommended that installation be performed by a qualified professional.
4.1 General Installation Diagram

Figure 4: Heater Integration into Vehicle System
4.2 Key Installation Points
- Mounting: Securely mount the main heater unit using the provided fixed plate in a location that allows for proper air circulation and access for maintenance.
- Water Connections: Connect the water inlet and outlet pipes to your vehicle's cooling system. Ensure a tight, leak-free connection.
- Fuel Supply: Connect the fuel line from your vehicle's diesel tank to the oil pump, and then from the oil pump to the heater's fuel inlet. The oil pump should be installed at a 45° angle for optimal performance.
- Air Intake/Exhaust: Connect the air intake pipe with the air filter and the exhaust pipe to the respective ports on the heater. Ensure exhaust gases are safely directed away from the vehicle's cabin.
- Electrical Connections: Use the wire harness to connect the heater to a 12V power source. Connect the LCD control panel and remote receiver as per the wiring diagram (not provided in detail, refer to specific product wiring instructions).
- Water Pump: Install the water pump in the coolant line to ensure proper circulation.

Figure 5: Component Details (Combustion Chamber, Oil Pump, Water Pump)
5. Operating Instructions
Your FDIK water heater is controlled via an LCD switch panel and a remote control.
5.1 Initial Start-up
- Ensure all connections (fuel, water, electrical) are secure and leak-free.
- Ensure the vehicle's fuel tank has sufficient diesel.
- Turn on the main power switch for the heater system.
5.2 Using the LCD Control Panel
- The LCD panel allows you to power on/off the heater, set desired temperatures, and monitor operational status.
- Refer to the specific LCD control panel manual for detailed button functions and menu navigation.
- Typically, you can adjust the heating power (5KW) and monitor the current coolant temperature.
5.3 Using the Remote Control
- The remote control provides convenient wireless operation for basic functions like turning the heater on/off.
- Ensure the remote has fresh batteries and is within range of the receiver.
5.4 Automatic Operation
The heater is designed to operate automatically. Once the coolant reaches approximately 80 °C, the heating element will shut off, but the circulation pump will continue to run to distribute the heat and maintain the interior temperature.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your FDIK water heater.
- Visual Inspection: Periodically check all hoses, pipes, and electrical connections for signs of wear, damage, or leaks.
- Air Filter: Inspect and clean or replace the air filter regularly to ensure proper airflow for combustion.
- Exhaust System: Check the exhaust pipe for blockages or damage. Ensure it is clear and securely fastened.
- Coolant Level: Ensure the vehicle's coolant level is adequate.
- Fuel System: Check fuel lines for any blockages or leaks.
- General Cleaning: Keep the exterior of the heater unit clean and free from debris.
7. Troubleshooting
If you encounter issues with your FDIK water heater, try the following basic troubleshooting steps:
- Heater Not Starting:
- Check the 12V power supply and all electrical connections.
- Ensure there is sufficient diesel fuel in the vehicle's tank.
- Verify the LCD control panel is powered on and set correctly.
- Insufficient Heating:
- Check the coolant level in the vehicle.
- Inspect the air filter for blockages.
- Ensure the water pump is functioning and circulating coolant.
- Unusual Noises or Smells:
- Immediately shut off the heater.
- Inspect for fuel leaks or exhaust blockages.
- Contact a qualified technician if the issue persists.
- LCD Display Issues:
- Check power connection to the LCD panel.
- Ensure cables are securely connected.
For complex issues, it is recommended to consult a professional technician or contact FDIK customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | FDIK |
| Model Name | FDIK water heater |
| Item Type | Heating & Fans |
| Voltage | 12V |
| Power (W) | 5000W |
| Fuel Type | Diesel |
| Switch Type | LCD Switch |
| Special Features | Heating |
| Item Weight | 5 kg |
| External Testing Certification | CE |
| Origin | Mainland China |
| Water Pump Flow Rate | Up to 23 L/min |
| Water Pump Head | 2.5 m |
| Oil Pump Fuel Efficiency | 0.4 L/h (22ml pump) |
| Combustion Chamber Material | High quality 310S |
| Package Dimensions (L x W x H) | 47 cm x 32 cm x 16 cm |
| Package Weight | 5.6 kg |
9. User Tips
- LCD Control Familiarization: Take time to understand all functions and settings available on the LCD control panel. This will allow you to fully utilize the heater's capabilities, including automatic modes and temperature adjustments.
- Power Consumption: While efficient, be mindful of the heater's power consumption, especially if operating for extended periods on battery power. Monitor your vehicle's battery voltage.
- Regulatory Compliance: The product is CE certified. If operating in regions with specific vehicle accessory regulations (e.g., Germany with ECE certificates), ensure local compliance.
- Pre-heating: For optimal comfort, consider starting the heater a short while before you intend to use the vehicle to allow the interior to pre-heat.
10. Warranty and Support
The FDIK 12V 5KW Diesel Water Heater is designed for durability and performance. For any warranty claims, technical support, or service inquiries, please contact your original seller or the FDIK manufacturer directly. Keep your purchase receipt as proof of purchase.
This product is CE certified, indicating compliance with European health, safety, and environmental protection standards.