Lemorele H200

Contents

Lemorele H200 USB C KVM Switch User Manual

Model: H200 | Brand: Lemorele

1. Introduction

The Lemorele H200 USB C KVM Switch is designed to streamline your workspace by allowing two USB-C enabled computers or devices to share a single HDMI monitor and a set of USB peripherals (keyboard, mouse, flash drives, etc.). This device supports high-resolution video output up to 4K@60Hz and provides power delivery to connected laptops, enhancing productivity and convenience.

2. Package Contents

Please check the box for the following items:

  • Lemorele H200 USB C KVM Switch
  • User Manual
  • 2 x USB-C to USB-C Cables (approx. 30cm / 11.8 inches each)
Package contents of Lemorele H200 USB C KVM Switch, including the switch, user manual, and two USB-C cables.
Figure 2.1: Package Contents
Dimensions of the Lemorele H200 USB C KVM Switch, showing a length of 11cm (4.3 inches) and a width of 5.1cm (2 inches).
Figure 2.2: Device Dimensions

3. Specifications

Feature Detail
Brand Lemorele
Model Number H200
Type USB C Switch (KVM)
Connector A (Input) Type-C (x2 for PC1, PC2)
Connector B (Output) HDMI-Compatible
Video Resolution Up to 4K@60Hz (also supports 4K@30Hz, 2K, 1080P)
USB Ports 2 x USB-A, 1 x USB-C (for data transfer only)
Audio Port 3.5mm Audio/MIC
Power Delivery Up to 100W input, 85W output for laptop charging
Switching Method Physical button
Compatibility Windows, Chrome OS, Linux, Android, Mac OS, iOS
Weight Approx. 90g
Certification CE

4. Setup Instructions

Before connecting, ensure all devices are powered off. Carefully follow the steps below:

  1. Connect the Monitor: Connect your HDMI monitor to the HDMI output port on the KVM switch using an HDMI cable. For 4K resolution, use an HDMI 2.0 cable.
  2. Connect Peripherals:
    • Connect your keyboard and mouse to the USB-A ports on the KVM switch.
    • If using a USB flash drive or other low-power USB device, connect it to one of the available USB-A ports.
    • If using a USB-C device for data transfer (e.g., a USB-C flash drive), connect it to the dedicated USB-C data port. Note: This USB-C port does not support video output. High-power USB devices like external hard drives or SSDs are not supported.
    • Connect headphones or a microphone to the 3.5mm Audio/MIC port if desired.
  3. Connect Computers/Devices: Use the provided USB-C to USB-C cables to connect your two computers (PC1 and PC2) to the respective USB-C input ports on the KVM switch. Ensure the USB-C ports on your computers support data transfer and video output (DisplayPort Alt Mode).
  4. Power Connection (Optional but Recommended for Charging): Connect a USB-C power adapter (up to 100W, not included) to the PD (Power Delivery) input port on the KVM switch. This will allow the KVM switch to charge the currently active laptop.
  5. Power On: Power on your monitor, then your computers/devices.
Diagram showing the connection of two USB-C computers to the KVM switch, which then connects to an HDMI monitor and various USB peripherals like keyboard, mouse, and audio devices.
Figure 4.1: Connection Diagram
Illustration of two computers (laptop, Mac mini, tablet, game console, smartphone) sharing four USB devices (keyboard, mouse, gamepad, earphone, hard drive) and one display (monitor, projector, TV) via the KVM switch.
Figure 4.2: Device Sharing Capability
Guide to checking USB-C port symbols on your device for compatibility. Compatible symbols include Thunderbolt 3/4, Data+Displayport Alt, and Data+PD Displayport alt. Incompatible symbols are Only Data Transfer, Only Charging, and Only Data+Power Delivery.
Figure 4.3: USB-C Port Compatibility Check

5. Operating Instructions

The Lemorele H200 KVM Switch is designed for simple plug-and-play operation without requiring any drivers.

  1. Switching Between Devices: To switch between the two connected computers (PC1 and PC2), press the physical button located on the KVM switch. The LED indicator next to the button will illuminate to show which computer is currently active.
  2. LED Indicators: The LED indicators (PC1, PC2) on the KVM switch will light up to indicate which input source is currently selected and displayed on the monitor.
  3. Power Delivery: If a power adapter is connected to the PD port, the KVM switch will provide up to 85W charging to the laptop that is currently selected (active). Note that only the active laptop will receive power; the inactive laptop will not be charged.
Image showing a laptop being fast-charged at 85W from a 100W power source through the KVM switch while in use.
Figure 5.1: Fast Charging via KVM Switch
Illustration showing the KVM switch's compatibility with various operating systems including Windows, Chrome OS, Linux, Android, Mac OS, and iOS, emphasizing its one-click switch, plug-and-play functionality.
Figure 5.2: Plug & Play Compatibility
Video 5.3: Product demonstration showing the features and usage of the Lemorele H200 USB C KVM Switch.

6. Maintenance

  • Keep the device in a cool, dry place away from direct sunlight and heat sources.
  • Clean the device with a soft, dry cloth. Do not use liquid or aerosol cleaners.
  • Avoid dropping or subjecting the device to strong impacts.
  • Ensure all cables are connected securely to prevent signal loss or damage.

7. Troubleshooting

No video output or flickering display:
  • Ensure all cables (USB-C to KVM, HDMI to monitor) are securely connected.
  • Verify that the USB-C port on your laptop/computer supports video output (DisplayPort Alt Mode). Refer to Figure 4.3 for compatibility.
  • If using 4K resolution, ensure your HDMI cable is HDMI 2.0 compliant and as short as possible. Also, confirm your computer and monitor support 4K.
  • Try restarting the KVM switch and connected devices.
USB peripherals (keyboard/mouse) not responding:
  • Check that the USB peripherals are correctly plugged into the USB-A ports on the KVM switch.
  • Ensure the active computer is selected on the KVM switch (check LED indicator).
  • Try connecting the peripherals directly to the computer to confirm they are functional.
Laptop not charging:
  • Ensure a compatible USB-C power adapter (up to 100W) is connected to the KVM switch's PD input port.
  • Confirm that the laptop you wish to charge is the currently active input on the KVM switch. Only the active laptop will receive power.
USB-C data port not working:
  • The USB-C data port is for data transfer only and does not support video output.
  • Avoid connecting high-power USB devices (e.g., external hard drives, SSDs) to this port, as they are not supported.

8. User Tips

  • For optimal performance, especially with 4K@60Hz video, use high-quality, certified HDMI 2.0 cables and ensure your source devices and display support the desired resolution.
  • Always ensure your USB-C source devices (laptops, tablets) have USB-C ports that support DisplayPort Alternate Mode for video output.
  • When connecting a power adapter for laptop charging, use a power adapter with sufficient wattage (e.g., 100W) to ensure stable power delivery.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official Lemorele website or contact their customer service. A comprehensive user manual in PDF format is also available for download:

Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.