1. Product Overview
The Flipsky FT85BS V2.0 ESC is a high-performance Electronic Speed Controller designed for various electric vehicles, including skateboards, scooters, and e-bikes. It features a robust aluminum case and is built with an AT32F403ARCT7 ARM Cortex-M4 CPU, offering enhanced motor control and a wide range of programmable options.

Package Contents
Upon unboxing, please verify that all components are present:
- Flipsky FT85BS V2.0 ESC with Aluminum Case
- USB Cable
- Various connection cables (PPM, UART, ADC, HALL, CAN)
- Power Switch

Product Dimensions
- Length: 110.5 mm
- Width: 55 mm
- Height: 30 mm (including aluminum case)


2. Setup and Wiring
Careful wiring is essential for the proper function and safety of your ESC. Refer to the diagrams below for correct connections.
General Wiring Diagram
This diagram illustrates the main connections for the ESC, including battery, motor, and various communication ports.

Throttle and Brake Wiring
For throttle, brake, and speed level controls, follow this specific wiring configuration.

Initial Configuration
The ESC is programmable via the Flipsky ESC Tool. Connect the ESC to your computer using the provided USB cable. Launch the software to configure motor parameters, battery settings, and control modes. Ensure all connections are secure before applying power.
3. Operating Instructions
Once properly installed and configured, the FT85BS V2.0 ESC offers flexible control options.
Powering On/Off
Use the red power switch button to turn the ESC on or off. Ensure all connections are stable before powering on.
Input Signal Support
The ESC supports various input signals for control:
- PPM: Standard Pulse Position Modulation for remote control.
- UART: Universal Asynchronous Receiver-Transmitter, compatible with FLIPSKY remote VX4.
- ADC: Analog-to-Digital Converter for analog inputs like throttles.
Speed Gear Levels
The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse. These can typically be configured via your remote control or the Flipsky ESC Tool.
Control Types
The ESC supports two primary control types:
- Current Control: Regulates the motor's current output.
- Duty Cycle Control: Regulates the percentage of time the motor is powered.
FOC (Field-Oriented Control)
The ESC supports FOC, which provides low working noise and smooth starting characteristics for your motor.
4. Maintenance and Firmware
To ensure the longevity and optimal performance of your Flipsky FT85BS V2.0 ESC, regular maintenance and firmware updates are recommended.
General Care
- Keep the ESC clean and free from dust, dirt, and moisture.
- Ensure adequate airflow around the ESC, especially during operation, to prevent overheating.
- Regularly check all wiring connections for looseness or damage.
Firmware Updates
The ESC firmware can be updated via the Flipsky ESC Tool. This allows for performance improvements, bug fixes, and compatibility with new features. Always follow the instructions provided with the update tool.

The ESC can also be programmed via the Flipsky VX4 remote (Firmware Version: VX4_V1.2).

5. Troubleshooting
The FT85BS V2.0 ESC includes several protection functions to prevent damage. If you encounter issues, consider the following:
Common Protection Functions
- Low and High Voltage Protection: Ensures the battery voltage stays within safe operating limits. Check battery charge and connections.
- Over-Current Protection: Prevents excessive current draw. Check for motor shorts or obstructions.
- Temperature Abnormality Protection: Protects against overheating of the ESC or motor. Ensure proper ventilation and avoid prolonged high-load operation.
- MOSFETs Over-Temperature and Over-Current Protection: Specific protection for the power transistors.
- Battery Over-Discharge Protection: Prevents damage to the battery from being drained too low.
- Motor Over-Temperature Protection: Guards against motor overheating.
Diagnostic Tools
The ESC supports real-time data monitoring and fault alerts, which can be accessed through the Flipsky ESC Tool. This can help identify the cause of any operational issues.
General Troubleshooting Steps
- Verify all wiring connections are secure and correct according to the diagrams.
- Check battery voltage and ensure it is within the specified range (4-20S).
- Inspect the motor for any physical damage or obstructions.
- If using a remote, ensure it is properly paired and functioning.
- Use the Flipsky ESC Tool to check for fault codes or abnormal readings.
6. Specifications
| Feature | Specification |
|---|---|
| Model | FT85BS V2.0 |
| CPU | AT32F403ARCT7 (ARM Cortex-M4) |
| CPU Clock Speed | 240MHz |
| Max PWM Switching Frequency | 45KHz |
| Voltage Range | 14-84V (safe for 4-20S) |
| Continuous Current (50V) | 60A |
| Continuous Current (75V) | 50A |
| Continuous Current (84V) | 40A |
| Peak Current | 250A |
| Communication Ports | USB, CAN, UART |
| Input Signal Support | PPM, UART (compatible with FLIPSKY remote VX4 only), ADC |
| BEC Output | 5V@1A |
| Speed Gear Levels | Low, Medium, High, Reverse |
| Motor/Power Wire Size | 12 AWG |
| Programmable | Yes (via Flipsky ESC Tool, Flipsky VX4 remote) |
| Regenerative Capacity | Yes |
| Dimensions (L*W*H) | 110.5mm * 55mm * 30mm (Including Alu. Case) |
| Power Switch Button | Red |
| Material | Metal |
| Origin | Mainland China |
| Recommended Age | 14+ years |
| Certification | CE |
| For Vehicle Type | Cars (RC applications) |
| RC Parts & Accs | Speed Controllers |
| Is Electric | No Battery |
| Is Batteries Included | No |
7. User Tips
- Accessory Compatibility: When connecting external accessories like displays or remotes, always verify their compatibility with the FT85BS V2.0 ESC's communication protocols (e.g., UART, CAN) and firmware version. Refer to the accessory's manual and the Flipsky ESC Tool for specific compatibility information.
- Software Updates: Regularly check the official Flipsky website for the latest versions of the Flipsky ESC Tool and firmware. Keeping your ESC updated can improve performance and address potential issues.
- Heat Management: While the aluminum case aids in heat dissipation, ensure your installation provides adequate airflow, especially during demanding use, to maintain optimal operating temperatures and prevent thermal throttling.
8. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer or the official Flipsky website. This manual provides general operational guidelines.
Technical Support
For technical assistance, firmware updates, and detailed software manuals, please visit the official Flipsky support channels. The Flipsky ESC Tool and VX4 remote manuals can be downloaded by scanning the QR codes provided in the Maintenance section (Figures 7 and 8).