varstrom TSDZ16

Contents

VARSTROM TSDZ16 48V 1000W Electric Bicycle Mid Drive Motor Conversion Kit

User Manual

1. Introduction

Thank you for choosing the VARSTROM TSDZ16 48V 1000W Electric Bicycle Mid Drive Motor Conversion Kit. This manual provides essential information for the safe and efficient use, installation, and maintenance of your new e-bike motor. Please read this manual thoroughly before installation and operation, and keep it for future reference.

The TSDZ16 motor offers powerful acceleration, efficient performance, and enhanced durability with its IPX6 waterproof rating. It is designed to transform your standard bicycle into a high-performance e-bike, suitable for various terrains and riding styles.

2. Safety Information

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

  • Always purchase batteries from reliable suppliers.
  • Ensure the battery is correctly installed and securely connected before each ride.
  • Verify that your bicycle is suitable and adapted for use with this pedelec conversion kit.
  • Practice using the pedelec in a quiet and safe environment to familiarize yourself with its characteristics before riding on public roads.
  • Do not attempt to ride the bike if you suspect any defect.
  • Before the first ride, ensure the complete bike has been checked by a qualified technician.
  • Regularly inspect all components of the bike, especially if you ride frequently. Mishandling can lead to accidents and injuries.
  • Always apply the brakes before placing your foot on the pedal. The motor provides assistance as soon as you start pedaling. Without this procedure, the pedelec can start suddenly, potentially causing injury.
  • Check the pedelec after any accident or if it has fallen over.

3. Product Overview & Features

The TSDZ16 is a powerful and efficient mid-drive motor designed for electric bicycle conversion. It integrates advanced sensor technology to provide a natural and responsive riding experience.

Key Features:

  • Super Stronger Power & Torque: 1000W rated power, 160N.m maximum torque, achieving speeds over 55KM/H. Offers strong hill-climbing ability and excellent acceleration.
  • Intelligent & Efficient Performance: Advanced sensor integration (torque, cadence, speed) for precise motor control, high efficiency (≥85%), and extended battery life through low power consumption. Leverages your bike's existing gears for optimal power delivery.
  • Upgrade IPX6 Waterproof: The IPX6 waterproof rating ensures reliability in various weather conditions, including rain and puddles.
  • Wide Compatibility & Universal Fit: Includes a 46-tooth chainring and is compatible with most standard bikes featuring a 68-73mm bottom bracket and 34-36mm inner diameter. Suitable for bicycles equipped with disc brakes, V-brakes, and a chain drive system.

4. Specifications

AttributeValue
Model No.TSDZ16
Rated Power1000W
Rated Voltage48V
Max Torque160N.m
Max Speed55-60 KM/H
Rated Efficiency≥85%
Weight6KG
Noise Level≤ 60dB
Waterproof LevelIPX6
Operating Temperature-20°C~45°C
Motor PlugXT60
Display OptionEKD01 Bluetooth / DZ40 / SW-M58
Display PAS Level0-5 Assistance
Chainwheel46T
Battery Option13Ah / 16Ah / 17.5Ah / 20Ah
Battery TypeDowntube / Rear Rack
Battery Charger2-4A Fast Charger
CertificationCE

5. Packing List

The package typically includes the following components:

Packing list for TSDZ16 motor kit showing various components
  • Brake Lever (or Brake Sensor, depending on selection)
  • TT-4 Cable
  • Protection Board
  • Cable Ties
  • Thumb Throttle
  • Speed Sensor
  • Headlight (Optional)
  • Rear Lamp (Optional)
  • Wrench
  • Crank Arms
  • Installation Screws
  • Fixed Bracket Accessories
  • Chainrings (46T)
  • Display (Optional: EKD01 Bluetooth, Mini DZ40, SW-M58)
  • Optional Battery (Various types: Max Shark Downtube, Voltz Downtube, Shark Downtube, G80 Shark Downtube, Rear Rack)
  • Quick Charger (if battery is included)

6. Installation & Setup

Before beginning installation, ensure your bicycle meets the compatibility requirements.

6.1 Compatibility Check

Diagram showing motor dimensions and bottom bracket compatibility
  • Bottom Bracket Width: The recommended mounting range for the bike's bottom bracket is 68-73mm. Special adapter screws are provided for 73mm bottom brackets.
  • Inner Diameter: The inner diameter of the bottom bracket should be between 33.5-36mm.
  • Brake Type: Only suitable for bicycles equipped with disc brakes, V-brakes, and a chain drive system. Not compatible with belt drive chainrings or coaster bikes.

The following tools are recommended for installation:

  • Tongsheng Special Wrench
  • Cross Screwdriver
  • M4, M5, M8 Allen Wrenches

6.3 Motor Installation

  1. Push the motor shaft sleeve into the bike's bottom bracket tube (68mm) in the direction of the arrow. The exposed axle length on the left side should be 11mm.
  2. Install the reinforcing plate: Place the reinforcing plate onto the five-axis. Insert two aluminum washers between the reinforcing plate and the motor housing. Secure with two M5 x 16 socket head cap screws.
  3. Screw the M33.5 nut onto the sleeve axis using a special tool. Tighten to a torque of 40N.m.
  4. Fix the motor and frame: Use M8 x 40 screws for the fixed block and motor housing stud hole preload. Use M8 x 45 screws through the fixing plate to secure it to the fixed block.
  5. Tighten the M8 x 40 screws to a final torque of 40N.m.
  6. Install the cranks: Attach the left and right cranks using M8 x 14 hexagon screws. Tighten to a torque of 40N.m.

6.4 Display Installation

  1. Install the display instrument: Secure the display with two M4 x 14 hexagon socket head screws and two M4 nuts. The bracket specifications are φ32, and an adjustment ring is included.
  2. Install the left-hand operation switch: Secure with two M2.5 x 10 hexagon socket head cap screws.

6.5 Speed Sensor Mounting

Attach the speed sensor to the rear frame using two ties, ensuring it is fixed flat on the fork.

6.6 Complete Wiring Diagram

Refer to the diagram below for the complete wiring connections.

Detailed wiring diagram for TSDZ16 motor kit components including motor, display, battery, and sensors

Note: The controller wiring includes headlight and tail light lines, with wide voltage input support.

6.7 Installation Video Guide

For a visual guide, you can watch the installation video by scanning the QR code or visiting the link: https://bit.ly/accolz8

7. Operating Instructions

7.1 Before Each Ride

Before each ride, perform a quick check of your e-bike:

  • Ensure the battery is securely in place and properly connected.
  • Check tire pressure, brakes, and all connections.
  • Verify that the display and all electrical components are functioning correctly.

7.2 Starting the System

To power on the system, press and hold the power button (usually marked with a '↺' symbol) on the control panel for approximately 3 seconds. The display will light up, indicating the system is active.

7.3 Selecting Assistance Level

Use the controls on your display (EKD01, DZ40, or SW-M58) to select your desired pedal assistance level (0-5). Level 0 provides no assistance, while level 5 provides maximum assistance.

7.4 Riding Modes

Diagram showing different riding modes: Throttle Ebike Mode, Pedal Assist Mode, Walk Assist Mode
  • Pedal Assist Mode: The motor provides assistance based on your pedaling input (torque and cadence sensors). This is the primary mode for a natural riding feel.
  • Throttle Ebike Mode: If equipped with a thumb throttle, you can engage the motor without pedaling.
  • Walk Assist Mode: This mode provides low-speed assistance to help you push the bike while walking.

8. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your TSDZ16 motor kit.

  • Cleaning: Keep the motor and electrical components clean. Use a damp cloth to wipe down surfaces. Avoid high-pressure washing directly on electrical parts.
  • Lubrication: Periodically lubricate the chain and other moving parts of your bicycle.
  • Cable Inspection: Regularly check all cables and connectors for wear, damage, or loose connections.
  • Fastener Check: Ensure all bolts and screws, especially those securing the motor and cranks, are tightened to the specified torque.
  • Battery Care: Follow the battery manufacturer's instructions for charging, storage, and maintenance to maximize its lifespan.

9. Troubleshooting

If you encounter issues with your TSDZ16 kit, refer to the following common troubleshooting steps:

  • Motor Not Providing Assistance:
    • Check if the battery is charged and properly connected.
    • Ensure the system is powered on and the display is active.
    • Verify that the pedal assistance level is not set to 0.
    • Inspect all wiring connections for looseness or damage.
  • Display Not Working:
    • Check the display's power connection.
    • Ensure the battery has sufficient charge.
  • Unusual Noises from Motor:
    • Stop riding immediately.
    • Inspect the motor for any loose parts or obstructions.
    • If the noise persists, contact customer support.

For more complex issues, please consult the official user manual PDF or contact customer support.

10. User Tips

  • The pressure sensor is highly praised for its natural feel, making the ride feel like an extension of your own effort.
  • Many users find the TSDZ16's assistance levels well-tuned right out of the box, with the third level often comparable to higher levels on previous models.
  • Consider removing the throttle lever if you prefer a purely pedal-assist experience, as the pressure sensor is often sufficient.
  • Allocate ample time for installation; some users report taking 4-6 hours for initial setup and finishing touches.

11. Warranty & Support

11.1 Warranty Information

The TSDZ16 motor kit comes with a 1-year warranty covering defects in materials or workmanship from the date of purchase. The warranty coverage varies depending on the defective part.

What is Covered:

  • Defects in materials or workmanship.

What is Not Covered:

  • Normal wear and tear.
  • Damage caused by accident, abuse, misuse, or failure to follow the product manual.
  • Negligence, improper assembly, or maintenance.
  • Modifications to the product.
  • Damage or malfunction caused by the use of non-genuine parts or accessories.

If your product breaks down within 15 days of receipt and is not covered by the above exclusions, you may be eligible for a free return, replacement, repair, or delivery of replacement parts.

After 15 days, inspection and repair services will be provided. In exceptional circumstances, a full kit replacement may be offered.

11.2 Warranty Activation

To activate your warranty, please use the link or QR code provided on page 6 of the original user manual (or page 4 of the English OCR text) to fill in the necessary information. Once activated, you only need to provide your registered information for service claims.

11.3 Warranty Claims & Support

To make a warranty claim, please contact your seller or customer service. You will need to provide proof of purchase and a detailed description of the problem. Our customer service team will provide instructions for returning the product for repair or replacement.

We have maintain points in Poland, France, and the UK, supported by a professional team of technical after-sales engineers to assist with product quality issues and provide consultation.

For further details, please refer to the official user manual (PDF) available at https://manuals.plus/m/bba3f44c2246efe7d233330d4f145b67cce3bba6022bcfac63c2c4aa10188f0d.

© 2024 VARSTROM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.