BEITIAN BV-29D

Contents

Beitian GNSS Receiver BV-29D User Manual

Model: BV-29D Series

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Beitian BV-29D series GNSS receivers. These receivers are designed for high-precision positioning applications, offering multi-constellation support and various serial port interfaces. Please read this manual thoroughly before using the device.

Beitian GNSS Receiver main product image with connection types
Figure 1: Beitian GNSS Receiver (BV-29D series) with various connection options.

2. Product Features

The Beitian BV-29D GNSS receiver series offers robust performance for various applications. Key features include:

  • Multi-constellation support: GPS L1, BDS B1, GALILEO E1, QZSS L1, SBAS L1.
  • High sensitivity for tracking and navigation.
  • Fast acquisition times for cold and hot starts.
  • Multiple serial port interfaces: TTL/RS-232/RS-485.
  • Built-in module and antenna for integrated design.
  • Support for NMEA 0183 protocol messages.
BV-59DN Product Features and Specifications
Figure 2: BV-59DN Product Features and Specifications overview.

3. Setup and Installation

3.1 Package Contents

Before installation, ensure all components are present:

Product List showing the BV-59DN Series Receiver and cable
Figure 3: Typical package contents for BV-59DN Series Receiver. Note: Accessories may vary by product variant.
  • Beitian GNSS Receiver (e.g., BV-29D, BV-59N)
  • DB9 Serial Cable (3.0m length)
  • (Optional) Other accessories based on specific model and customer requirements.

3.2 Power Supply

The receiver requires a DC voltage input. Ensure your power source meets the following specifications:

  • Voltage: DC 9.0V-34.0V (Typical: 12.0V)
  • Current: 20mA (at 12.0V)

Connect the power wires from the DB9 cable to your power supply, observing correct polarity.

3.3 Physical Installation

The receiver features a magnetic bottom for easy and secure fixed installation. Choose a location with a clear, unobstructed view of the sky to ensure optimal satellite signal reception. Avoid placing the receiver near large metallic objects or sources of electromagnetic interference.

Application Scenarios for the GNSS Receiver
Figure 4: Example application scenarios for the GNSS Receiver, including smart devices, driverless cars, vehicle positioning, and network optimization.

3.4 Pin Description and Wiring

The receiver connects via a DB9 serial female connector. The pinout is crucial for correct operation. Refer to the table below for pin assignments. For a visual representation, please consult the "Pin Description" diagram on page 3 of the official BV-29D Datasheet (PDF).

Table 1: DB9 Serial Female Connector Pinout
PINNameI/ODescription
9VCCIDC 9.0V-34.0V supply input, Typical: 12.0V
2TXORS-232 Serial Data Output
3RXIRS-232 Serial Data Input
5GNDGGround

Note: The receiver supports TTL, RS-232, and RS-485 interfaces. The specific model purchased will determine the available interface. Ensure compatibility with your system.

4. Operation

4.1 Initial Power-Up and Satellite Acquisition

Once powered, the receiver will begin searching for satellite signals. The time to first fix (TTFF) depends on the initial conditions:

  • Cold Start: Approximately 28 seconds.
  • Hot Start: Approximately 1 second.
  • AGPS Time To First Fix: Approximately 1.5 seconds.

Ensure the receiver has a clear view of the sky for optimal acquisition performance.

4.2 Data Output and NMEA Protocol

The receiver outputs positioning data via its serial interface using the NMEA 0183 protocol (version 4.10 standard). The default baud rate is 115200bps, but it supports a range from 9600 to 2000000bps. The update rate can be configured from 1Hz to 20Hz (default 1Hz).

The NMEA protocol messages are structured with a start character ('$'), Talker ID, Message ID, data fields separated by commas, a checksum, and a terminator (<CR><LF>). For a comprehensive understanding of the NMEA frame structure and detailed message formats, refer to pages 5-19 of the official BV-29D Datasheet (PDF).

Supported NMEA Messages:

  • GGA: Global Positioning System Positioning Data (Time, location, positioning related data).
  • GSA: GNSS receiver operating mode, valid satellites used, and DOP value.
  • GSV: Number of satellites in view, satellite ID, elevation, azimuth, and signal C/N0 value.
  • RMC: Recommended minimum GNSS data set (time, date, position, heading, velocity).
  • THS: GNSS Heading angle and positioning mode.
  • GLL: Positioning geographic information.
  • GST: Pseudorange error status information.
  • GMP: GNSS Map projection information.

The Talker ID indicates the satellite system category (e.g., "GP" for GPS/QZSS/SBAS, "GN" for GNSS, "BD" for Beidou, "GL" for GLONASS, "GA" for Galileo).

4.3 Operational Accuracy and Restrictions

The receiver provides the following typical accuracy:

  • Horizontal Position: 2.0m CEP
  • Velocity: 0.1m/s CEP

Operational restrictions to note:

  • Max Altitude: 50,000m
  • Max Speed: 500m/s
  • Max Gravitational Acceleration: <4g

5. Maintenance

The Beitian BV-29D receiver is designed for durability and requires minimal maintenance. Follow these guidelines to ensure its longevity:

  • Cleaning: Keep the receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid harsh chemicals or abrasive materials.
  • Environmental Conditions:
    • Operating Temperature: -40°C to +85°C.
    • Storage Temperature: -40°C to +105°C.

    Avoid exposing the device to temperatures outside these ranges, as it may affect performance or cause damage.

  • Connections: Periodically check all cable connections to ensure they are secure and free from corrosion or damage.
  • Firmware: The receiver supports firmware updates and configuration changes via its FLASH memory, which will not be lost in the event of a power outage. Consult the manufacturer for information on available firmware updates.

6. Troubleshooting

If you encounter issues with your Beitian GNSS receiver, consider the following troubleshooting steps:

  • No Satellite Signal:
    • Ensure the receiver has a clear, unobstructed view of the sky.
    • Verify that the antenna is properly connected and not damaged.
    • Move the receiver away from potential sources of electromagnetic interference (e.g., other electronic devices, large metal structures).
  • No Data Output:
    • Check the power supply connection and ensure the receiver is powered on.
    • Verify the serial cable connection to your host device.
    • Confirm that the baud rate and other serial port settings on your host device match the receiver's configuration (default 115200bps).
    • Ensure your software is correctly configured to read NMEA 0183 messages.
  • Inaccurate Positioning Data:
    • Ensure the receiver has acquired a sufficient number of satellites (check GSV messages).
    • Verify that the receiver is operating within its specified environmental and operational limits (e.g., speed, altitude, gravitational acceleration).
    • Consider if there are any local factors causing signal degradation (e.g., urban canyons, dense foliage).
  • Intermittent Operation:
    • Check for loose connections or damaged cables.
    • Ensure the power supply is stable and within the specified voltage range.
    • Verify that the operating temperature is within the recommended range.

For more advanced diagnostics or persistent issues, refer to the detailed NMEA protocol descriptions in the official BV-29D Datasheet (PDF) or contact customer support.

7. Specifications

The following table summarizes the key specifications for the Beitian BV-29D series GNSS receivers:

Table 2: Technical Specifications
FeatureSpecification
Model NameBV-29D (and variants like BU-29D, BV-59N, etc.)
BrandBEITIAN
ChipB1300Y
Receiver TypeGPS L1, BDS B1, GALILEO E1, QZSS L1, SBAS L1
Augmentation SystemSBAS, QZSS
Channels100
Sensitivity (Tracking & Navigation)-163dBm
Sensitivity (Reacquisition)-159dBm
Sensitivity (Cold Start)-148dBm
Sensitivity (Hot Start)-159dBm
Horizontal Position Accuracy2.0m CEP
Velocity Accuracy0.1m/s CEP
Cold Start Acquisition28s
Hot Start Acquisition1s
AGPS Time To First Fix1.5s
Baud Rate9600~2000000bps (default 115200bps)
Data LevelRS-232 (TTL/RS-485 variants available)
ProtocolNMEA 0183
Update Rate1~20Hz (default 1Hz)
FLASH MemorySupported (configuration retained after power loss)
Max Altitude50,000m
Max Speed500m/s
Max Gravitational Acceleration<4g
Power VoltageDC 9.0V-34.0V (Typical: 12.0V)
Power Current20mA (at 12.0V)
DimensionsΦ140mm * 150.5mm
Weight<1500g
ConnectorDB9 serial female
Cable Length3.0m
Operating Temperature-40°C ~ +85°C
Storage Temperature-40°C ~ +105°C
Fixed MethodMagnetic bottom

For detailed structural diagrams and further technical information, please refer to the official BV-29D Datasheet (PDF).

8. User Tips

  • Optimal Placement: Always mount the receiver in a location with an unobstructed view of the sky to maximize satellite visibility and signal strength.
  • Cable Management: Secure the 3-meter DB9 cable to prevent strain or accidental disconnection, especially in moving applications.
  • Power Stability: Use a stable power supply within the specified voltage range (DC 9.0V-34.0V) to avoid erratic behavior or damage.
  • Software Compatibility: Ensure your receiving software or microcontroller is configured to correctly interpret NMEA 0183 sentences at the appropriate baud rate.
  • Interference Avoidance: Keep the receiver away from high-power radio transmitters, motors, or other sources of electrical noise that could degrade GNSS signal quality.

9. Frequently Asked Questions (FAQ)

Q: What is the default baud rate for the data output?
A: The default baud rate is 115200bps, but it can be configured between 9600bps and 2000000bps.
Q: How long does it take for the receiver to get a fix?
A: A cold start typically takes 28 seconds, while a hot start takes about 1 second. AGPS can achieve a first fix in approximately 1.5 seconds.
Q: Can this receiver be used in a moving vehicle?
A: Yes, it supports speeds up to 500m/s and gravitational acceleration up to <4g, making it suitable for various mobile applications.
Q: What NMEA messages does it output?
A: It outputs standard NMEA 0183 messages including GGA, GSA, GSV, RMC, THS, GLL, GST, and GMP.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Detailed technical specifications and protocol information can be found in the official BV-29D Datasheet (PDF).

© 2024 Beitian. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.