FAZY Linux System Car Multimedia Player User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your FAZY Linux System Car Multimedia Player. This unit is designed for BMW 5 Series F10, F11, and F18 models from 2010-2017, offering a 10.25-inch or 12.3-inch 1920x720 touch screen with Wireless CarPlay, Android Auto, and Bluetooth DSP capabilities. Please read this manual thoroughly before use to ensure proper functionality and safety.

Note: This unit operates on a Linux system, not Android. It does not support downloading apps directly but allows video playback via USB drive or Mirrorlink.

2. Safety Information

Please read and adhere to the following safety guidelines to prevent accidents and ensure the longevity of your device.

• Driving Safety Warning: Do not operate complex functions (e.g., navigation route setting, audio/video file selection) while driving. Use voice control or allow a front passenger to assist. Distracted driving can lead to accidents.
• Circuit Safety Warning: This device is compatible only with 12V/24V DC in-car power supplies. Professional installation to the vehicle's original circuit interface is required. Direct connection to battery terminals or modification of non-standard power cords is strictly prohibited, as this can cause short circuits, fuse blowing, or even vehicle combustion.
• Installation Safety Warning: Ensure the device is firmly fixed to the center console to prevent it from falling during sudden braking. The installation position must not obstruct the airbag deployment area, the driver's line of sight, or key instrument panel information.
• Environmental Safety Warning: Avoid exposing the device to extreme environments. Do not expose the screen to direct sunlight in summer, as high temperatures can damage it. Do not place flammable or explosive items near the device.
• Disposal and Recycling Warning: Dispose of waste devices and accessories according to the EU WEEE Directive (2012/19/EU) at designated e-waste recycling points. Remote controls with battery components should be recycled separately per the EU Battery Directive (2006/66/EC).

3. Product Overview

The FAZY Car Multimedia Player enhances your driving experience by integrating modern connectivity and entertainment features while retaining your car's original system functionalities.

Key Features:

• Operating System: Linux (known for stability and efficiency)
• Display: 10.25-inch or 12.3-inch IPS Touch Screen with 1920*720 High Resolution
• Connectivity: Wireless Apple CarPlay, Wireless/Wired Android Auto, Wireless Mirrorlink (Airplay for iOS, Auto-link for Android)
• Audio: Built-in DSP Processor (16 EQ), Bluetooth 5.0 for hands-free calls and music
• Navigation: Supports online navigation apps like Google Maps and Waze
• Integration: Retains original car OEM system, radio, GPS navigation, Bluetooth, DVD/CD, USB, SD. Supports factory rear view camera, 360 camera, door open warning.
• Control: Supports original joystick, factory command knob, touch mouse, and steering wheel controls.
• Voice Control: Supports Siri and Google Voice Control.
• Automatic Brightness: Adjusts display brightness based on original car headlights for comfortable viewing.
• Installation: Non-destructive, plug-and-play installation without cutting wires.

4. Setup and Installation

Before beginning installation, ensure the engine is switched off.

4.1. Pre-Installation Checks

• Accessory Completeness: Verify that the package includes the player host, special mounting bracket, power cord harness, GPS antenna, Bluetooth microphone, and instruction manual.
• Vehicle Compatibility: Ensure your vehicle's voltage is 12V/24V, circuit load is ≥ 10A, and the reserved installation space in the center console is approximately 180mm (L) × 100mm (W) × 150mm (D).
• Pre-installation Environment: Clean the installation area, remove any ornaments or cables that may interfere, and ensure the surface is dry and clean.
• Important Note: This unit is NOT suitable for BMW 5 Series F07 models.

4.2. Product Components

4.3. Wiring Harness Guide

The following diagrams illustrate the connections for the main screen and power cable.

4.4. Cables Connection Chart

This chart provides an overview of how all cables should be connected. For CCC, CIC, NBT, and EVO versions, ensure you connect the original LVDS cable.

4.5. LVDS Port Check

If the 'My-car' app displays 'No Signal' or a poor-resolution menu, check the LVDS port connection. Ensure the LVDS plug (removed from the OEM screen) is correctly connected to the new screen.

4.6. General Installation Notes

• You will need to remove your factory car screen to install this Linux touchscreen.
• If you are unsure about removing the car dashboard or encounter any installation issues, it is recommended to seek assistance from a professional car shop. For technical support related to the device, please contact our team.

5. Operating Instructions

5.1. Dual System Switching

The unit supports free switching between the original car system and the Linux system.

5.2. Mobile Phone Connection (CarPlay & Android Auto)

Connect your smartphone for Apple CarPlay or Android Auto functionality. This allows you to use phone apps directly on the car's screen.

5.3. Hands-Free Calls and Music

Utilize the built-in Bluetooth system for hands-free phone calls and music playback.

5.4. Online Navigation

Access online navigation applications like Google Maps and Waze directly on your car's screen.

5.5. Automatic Brightness Adjustment

The screen features an automatic photosensitive brightness adjustment function, adapting to day and night modes based on your car's original headlights for optimal viewing comfort.

5.6. CarPlay/Android Auto Sound Setup (Bluetooth Connection)

To ensure proper audio output for CarPlay/Android Auto, follow these steps:

1. On the car screen, click on Settings and select System.
2. Turn on the "Use Car's BT Channel" option.
3. Scroll down to Car Settings and turn off the "Auto Switch to AUX" option.
4. Go to "OEM Car Info" and connect the original Bluetooth.
5. On your phone, go to Bluetooth settings and pair with the car's Bluetooth (e.g., "BMW 43722"). Confirm the passkey.
6. After a successful connection, change the multimedia mode to the Bluetooth you just connected to.
7. Go back to the Linux interface and connect the Linux Bluetooth (e.g., "CAR-BT-6ee3"). Pair your phone with this Bluetooth.
8. It will automatically enter the CarPlay interface after successful connection. At this point, the Linux Bluetooth will automatically disconnect, and the OEM Bluetooth will remain connected for audio.

5.7. Resolution Setup

If the 'My-car' app shows no signal or a poor-resolution menu, you may need to adjust the resolution settings. Refer to the 'LVDS Port Check' in the Setup section for initial troubleshooting. If the issue persists, navigate to the system settings to verify resolution settings.

5.8. Factory Settings

Accessing factory settings may be required for advanced configurations or troubleshooting. The password for UI 1 is 666666 and for UI 2 is 8888.

1. Go to Settings > Factory Setting.
2. Enter the password (e.g., 666666).
3. Navigate to BMW Settings > Automatically Select.
4. Adjust settings as needed. If you encounter issues, contact our support team for a video solution.

6. Maintenance

• Screen Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen-specific cleaning solution. Avoid harsh chemicals or abrasive materials.
• General Care: Keep the device free from dust and debris. Avoid spilling liquids on the unit.
• Software Updates: Periodically check for firmware updates to ensure optimal performance and access to new features.

7. Troubleshooting

7.1. My car original system looks bad after installing the unit.

Solution:

1. Check Settings > Factory Setting > "Input password" > BMW Settings > Automatically Select.
2. If this setting does not resolve the issue, contact our support team for a video solution.

7.2. When using CarPlay, I cannot hear sounds, but original Bluetooth sounds work fine.

Solution: This usually happens if your phone is still connected to the original car's Bluetooth. Please forget the original Bluetooth connection on your phone and reconnect as per the CarPlay/Android Auto Sound Setup instructions.

7.3. Cannot connect with CarPlay.

Solution:

1. Ensure the screen is connected to Wi-Fi.
2. Pull down the Status Bar, long-press "Hot spot" > WiFi Hotspot > Advanced > AP Band > Switch to 2.4Ghz.
3. Turn off the car for more than 5 minutes, then restart and try connecting again.

7.4. The audio sounds sometimes terrible.

Solution: Adjust the media volume to 20-25 in Settings > Volume > Media.

7.5. In NBT/EVO versions, sound automatically switches to the original car system sound when using the Linux system.

Solution: For some NBT/EVO system models, you need to long-press the number "8" in AUX mode of the original system to save AUX, allowing the Linux system's sound to function correctly. Follow these steps:

1. Access the original car system's multimedia page.
2. Go to "External devices" and long-press the number "8" on the air conditioner panel.
3. After holding down "8", numbers will display on the top of the screen.
4. "Hold for a long time to store" will appear above the external device until a "drip" sound is released.
5. When you release your hand, the screen will show an option similar to "AUX Front". Select this option with your mouse.
6. After adjusting the volume, touch the screen to return to the Linux system; the Linux system sound should now work.

8. Specifications

8.1. Screen Size Comparison

9. Warranty and Support

9.1. Warranty Information

This product comes with a 24-month free warranty, covering non-human damage. This warranty does not cover installation faults or device damage caused by abnormal vehicle circuits.

9.2. Manufacturer Information

Manufacturer Name: Shenzhen Kaijieshun Electronic Technology Co., Ltd.

Manufacturer Address: Room 1302, Building 3, Geya Technology Building, Watch Base, Matou Community, Matian Street, Guangming District, Shenzhen

9.3. Contact Support

For technical support, product operation, installation guidance, or any issues, please contact our team via email:

Email: 3184614422@qq.com

10. User Tips

• Boot Logo Customization: If you are not satisfied with the default main menu appearance or boot logo, these can often be changed or customized. Many users prefer to set an original BMW M logo for a more integrated look.
• Wireless CarPlay Experience: Users highly recommend the wireless CarPlay feature for its convenience and seamless integration.
• F10 Model Mounting: For F10 models, ensure you have the correct plastic adapter for mounting the larger screen.
• Audio Connection: While the system supports wireless audio, ensure your phone's original Bluetooth connection is properly managed to avoid sound conflicts, especially when using CarPlay.