Kiprim AG01

Contents

Kiprim AG01 Digital Angle Gauge User Manual

Model: AG01

1. Product Overview

The Kiprim AG01 Digital Angle Gauge is a versatile and precise tool designed for accurate angle measurement in various applications, including woodworking, construction, and machinery setup. It features a clear backlit display, magnetic base, and multiple measurement modes for enhanced usability.

Kiprim AG01 Digital Angle Gauge front view
Front view of the Kiprim AG01 Digital Angle Gauge.
Product demonstration video showcasing key features and usage.

2. Setup

2.1 Battery Installation

  1. Locate the battery compartment on the back of the device.
  2. Open the battery cover.
  3. Insert two AAA 1.5V batteries, ensuring correct polarity (+/-).
  4. Close the battery cover securely.

2.2 Initial Power On

Press the power button (ON/OFF) to turn on the device. The display will light up, showing the current angle reading.

3. Operating Instructions

3.1 Power On/Off

  • Press the ON/OFF button to turn the device on or off.
  • The device features a 3-minute auto-shutdown function to conserve battery life if no operation is detected.
Digital angle gauge with 3-minute auto-shutdown indicator
The device automatically shuts down after 3 minutes of inactivity.

3.2 ABS/REF Measurement Modes

The AG01 offers two measurement modes:

  • ABS (Absolute) Mode: Measures angles relative to a true horizontal (0° = perfect level).
  • REF (Relative) Mode: Measures angles relative to any set base, allowing for differential measurements.

Press the REF/ABS button to toggle between these two modes.

Diagram showing ABS and REF measurement modes
Illustration of ABS mode (absolute to horizontal) and REF mode (relative to a set zero).

3.3 Unit Conversion (° & %)

The device can display measurements in degrees (°) or percentage (%).

  • Long-press the UNIT button to switch between degree (°) and percentage (%) units.
Images showing angle measurement in degrees and slope measurement in percentage
Measure angles in degrees for machinery or slopes in percentage for construction.

3.4 Angle Hold Function

To freeze the current measurement on the display:

  • Press the HOLD button. The reading will be locked.
  • Press the HOLD button again to release and resume live measurement.
Image demonstrating the angle hold function with 'Data Locked' indicator
The Angle Hold function allows you to free your hands to record measurements.

3.5 Automatic Screen Flip

The display automatically rotates to ensure readability regardless of the device's orientation. This feature adapts seamlessly to various work scenarios.

Image illustrating the screen flip feature for easy reading at any angle
The screen automatically flips for easy reading from any angle.

3.6 Magnetic Base Usage

The AG01 features a 3-sided magnetic base for hands-free operation on metal surfaces.

  • Simply attach the device to any ferrous metal surface (e.g., pipes, steel beams, saw blades).
  • The strong adhesion maintains stability, allowing for precise measurements without needing to hold the device.
Three images showing the magnetic base in use on a circular saw, a pipe, and a metal surface
The 3-sided magnetic base allows for hands-free measurement on various metal surfaces.
Collage of images demonstrating the 3-sided magnetic base in various scenarios
The magnetic base provides strong adhesion for stable measurements.

3.7 Calibration

For optimal accuracy, it is recommended to calibrate the device periodically or if you suspect inaccurate readings. A common calibration method for digital angle gauges involves a two-step process:

  1. Step 1: Zero Calibration on a Flat Surface
    Place the angle gauge on a perfectly flat, level surface. Press and hold the REF/ABS button until the display shows '0.00°' or 'CAL'. This sets the current surface as the reference zero.
  2. Step 2: 180-Degree Calibration
    Without lifting the device, rotate it 180 degrees on the same flat surface. The display should ideally read '0.00°' again. If it does not, the device may automatically adjust, or you might need to repeat the zero calibration. Some models require pressing the REF/ABS button again after the 180-degree rotation to confirm calibration. Consult the specific instructions for your device if a detailed calibration menu is available.

4. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
  • Battery Replacement: Replace batteries when the low battery indicator appears on the display.

5. Troubleshooting

  • Device does not turn on: Check if batteries are installed correctly and have sufficient charge. Replace batteries if necessary.
  • Inaccurate readings: Perform a calibration as described in Section 3.7. Ensure the measurement surface is clean and stable.
  • Display is dim or flickering: Replace batteries. Ensure the device is not exposed to extreme temperatures.

6. Specifications

FeatureSpecification
Model NumberAG01
Measuring Range4 x 90° (Full Range)
Resolution0.05°
Accuracy±0.2°
Power Supply2 x AAA 1.5V Batteries
Battery Life> 24 hours
Weight88g
Auto-Shutdown3 minutes
Construction MaterialPC + 15% GF Shell
OriginMainland China
CertificationCE
Kiprim AG01 Digital Angle Gauge feature overview
Overview of the Kiprim AG01's key features and specifications.
Diagram illustrating the 4x90 degree full measurement range
The 4x90° full range covers all angles from flat to straight.

7. User Tips

  • Regular Calibration: For consistent accuracy, especially in critical projects, perform the two-step calibration (Section 3.7) before each major use or if the device has been subjected to impacts.
  • Utilize Magnetic Base: Take full advantage of the 3-sided magnetic base for hands-free operation on metal workpieces, improving stability and precision.
  • Backlight for Low Light: The backlit screen ensures clear display in low-light environments, making it suitable for various working conditions.

8. Warranty and Support

Kiprim products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the official Kiprim website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

© 2023 Kiprim. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.