MEKEDE Car DVR Dash Cam

Contents

MEKEDE Car DVR Dash Cam User Manual

Model: Car DVR Dash Cam

Brand: MEKEDE

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE Car DVR Dash Cam. This device is designed to enhance driving safety with features like Full HD 1080P recording, Night Vision, and Advanced Driver-Assistance Systems (ADAS) including anti-collision and lane departure warnings. It connects via USB to compatible Android multimedia players.

2. Package Contents

Please check the box for the following items:

  • MEKEDE Car DVR Dash Cam Unit
  • USB Connection Cable
  • Instruction Manual
  • Double-sided tape for mounting
  • (Optional) TF Card (if purchased separately)
Image showing the MEKEDE Car DVR Dash Cam, its packaging box, and the instruction manual.
Figure 2.1: Contents of the MEKEDE Car DVR Dash Cam package.

3. Specifications

FeatureDescription
Item TypeCar DVR (Portable Recorder)
Power SourceCorded Electric
Chipset ManufacturerGeneralplus
Number of Lenses1
Camera ResolutionUp to 1080P (1920x1080) / 720P (1280x720)
Video Encoding FormatMOV (MJPG)
Frames Per Second30fps
View Angle170°
Lens Rotation AngleManual up and down 60° rotation
NightShot FunctionYes
Touch ScreenNo
Rear CameraNone
GPS LoggerNone
BatteryNone (Corded Electric)
External StorageSupports TF Card (SD/MMC card)
InterfaceUSB 2.0
Fixed WayDouble-sided tape
System CompatibilityAndroid 4.0 and above large screen navigators
CertificationCE
Diagram showing key features: Night vision, 170 degree viewing angle, 1080P HD (1920*720 high definition display), and TF Card support.
Figure 3.1: Core Technology and Features.

4. Setup and Installation

Follow these steps to install and set up your MEKEDE Car DVR Dash Cam:

  1. Mounting the Dash Cam:
    • Choose a suitable location on your windshield that does not obstruct your view of the road.
    • Clean the mounting surface thoroughly.
    • Attach the dash cam using the provided double-sided tape. Ensure it is securely fixed.
    • Adjust the lens angle manually up or down by 60° to capture the desired view.
    Image showing the MEKEDE Car DVR Dash Cam from top and bottom views, highlighting the TF card slot.
    Figure 4.1: Product display with TF card slot location.
  2. Insert TF Card:
    • Locate the TF card slot on the dash cam (refer to Figure 4.1).
    • Insert a compatible TF card (not included) into the slot until it clicks into place.
  3. Power Connection:
    • Connect the dash cam to your car's power source using the USB cable. The device is corded electric and does not contain an internal battery.
    • Route the cable neatly to avoid interference with driving controls.
  4. Connecting to Android Multimedia Player:
    • Connect the dash cam's USB cable to a USB port on your Android multimedia player (compatible with Android 4.0 and above).
    • The device includes an embedded APK installation file for car mobile interconnection. This should automatically prompt installation or be accessible via a file manager on your Android unit.
  5. Software Setup on Android Unit:

    After connecting, you need to select the DVR application on your Android multimedia player:

    • Step 1: Click on 'Settings' on your Android unit's home screen.
    • Step 2: Find 'General' and then 'Launcher App Setting'.
    • Step 3: Select 'HD DVR' from the list of available apps. This indicates successful setup.
    Three images illustrating the setup steps on an Android head unit: 1. Clicking 'Settings', 2. Navigating to 'General' and 'Launcher App Setting', 3. Selecting 'HD DVR' to confirm successful setup.
    Figure 4.2: Steps for setting up the DVR app on an Android multimedia player.

    Note: The innovative layout displaying the DVR on the home screen is applicable to MEKEDE M200-M800, MS 3D, and M6 3D systems.

    Screenshot of an Android head unit home screen showing the DVR display in a window, with a note that this feature is for specific MEKEDE systems.
    Figure 4.3: Innovative layout displaying DVR on Android home screen.

5. Operating Instructions

Once installed and set up, your MEKEDE Car DVR Dash Cam will operate as follows:

  • Automatic Recording: The device supports auto power on and will start video recording automatically after your car starts.
  • ADAS Function (Advanced Driver-Assistance Systems):
    • Front Vehicle Distance Prediction: The system detects the distance to the vehicle in front of you.
    • Anti-Collision Warning: If the device detects that the vehicle in front is too close, it will issue an alarm to alert you to potential collision risks.
    Image showing a car display with ADAS warnings, indicating distances to vehicles ahead (16M, 20M, 22M) and highlighting potential collision zones.
    Figure 5.1: ADAS Driving Recorder with distance prediction.
  • LDWS Function (Lane Departure Warning System):
    • The device monitors your vehicle's position relative to lane markings.
    • If the driver unconsciously deviates from the original lane, a lane departure alarm will be automatically triggered.
    Diagram illustrating Left Lane Departure Warning, Front Collision Warning, and Right Lane Departure Warning scenarios.
    Figure 5.2: Anti-collision and Lane Departure Warning illustrations.
  • Night Vision: The dash cam is equipped with NightShot function, allowing clear recording even in low-light conditions.
    Comparison image showing the clarity of 1080P HD picture quality during daytime and nighttime recording.
    Figure 5.3: 1080P HD picture quality in day and night conditions.
  • Motion Detection: The device supports motion detection, which can trigger recording when movement is detected in front of the vehicle while parked.
  • Loop Recording: The dash cam utilizes loop recording, continuously recording and overwriting the oldest footage when the TF card is full. Important footage can be locked to prevent overwriting.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the lens and the body of the dash cam. Do not use abrasive cleaners or solvents.
  • TF Card Management:
    • Periodically format the TF card (e.g., once a month) to ensure optimal performance and prevent data corruption.
    • Replace the TF card if you notice any recording errors or performance degradation.
  • Firmware Updates: Check the MEKEDE official website or contact support for any available firmware updates to ensure your device has the latest features and bug fixes.

7. Troubleshooting

ProblemPossible Solution
Dash cam does not power on.
  • Check the USB connection to both the dash cam and the Android multimedia player.
  • Ensure the car's ignition is on and the multimedia player is powered.
  • Verify the USB cable is not damaged.
No recording or recording errors.
  • Ensure a TF card is properly inserted.
  • Check if the TF card is full; format it if necessary (back up important files first).
  • Try a different TF card to rule out card issues.
  • Verify the DVR app is correctly selected in the Android unit's settings (refer to Section 4.5).
ADAS/LDWS warnings are inaccurate or not working.
  • Ensure the dash cam is mounted correctly and has a clear, unobstructed view of the road.
  • Clean the windshield in front of the camera lens.
  • Calibrate the ADAS/LDWS features through the DVR application settings on your Android unit, if available.
Video quality is poor.
  • Clean the camera lens.
  • Ensure the recording resolution is set to 1080P in the DVR app settings.
  • Check for sufficient lighting, especially during night recording (Night Vision is active, but extreme darkness can still affect quality).
Dash cam not recognized by Android unit.
  • Ensure your Android multimedia player is running Android 4.0 or above.
  • Try connecting to a different USB port on the Android unit.
  • Reinstall the DVR APK application.
  • Restart both the Android unit and the car.

8. User Tips

  • Professional Installation: For optimal performance and to avoid potential damage, it is highly recommended to have the dash cam installed by a professional at a car service store.
  • Regular TF Card Checks: Regularly check your TF card for free space and ensure it is functioning correctly to prevent loss of important footage.
  • ADAS Calibration: If your Android unit allows, calibrate the ADAS and LDWS features after installation and periodically to ensure their accuracy.
  • Cable Management: Secure all cables to prevent them from interfering with driving or becoming a distraction.

9. Warranty and Support

Your MEKEDE Car DVR Dash Cam comes with the following warranty and support:

  • Warranty Period: A 1-year factory warranty is provided for the product (accessories not included).
  • Warranty Extension: The warranty can be extended to 2 years if you provide 5-star praise and share installation photos on social media, then provide feedback to MEKEDE.
  • Firmware/Software Updates: MEKEDE provides updates for firmware, software, UI, and GPS navigation maps for free. You can request these updates if new versions become available.
  • Contact Support: For any issues, questions, or support requests, please contact MEKEDE customer service.

MEKEDE aims for 100% customer satisfaction and encourages direct communication to resolve any concerns.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.