1. Introduction
This instruction manual provides detailed guidance for assembling and maintaining your Robotime 3D Wooden Puzzle building model. These DIY kits allow you to construct intricate replicas of famous architectural landmarks such as the Big Ben, Tower Bridge, and a Five-Storied Pagoda. Each model is designed to stimulate spatial imagination, improve graphic recognition, and enhance observation and hand-eye coordination skills, offering an engaging and educational experience for both children and adults.
2. Safety Information
- Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age.
- Age Recommendation: Recommended for ages 14 and above. Children aged 8 and older can assemble with adult supervision or guidance.
- Materials: The puzzle pieces are made from environmentally friendly, non-toxic, and recyclable wood.
- Battery Safety: If your model includes LED lights, ensure batteries are installed correctly according to polarity. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly.
3. Package Contents
Each Robotime 3D Wooden Puzzle kit typically includes:
- Pre-cut wooden puzzle sheets (number of pieces varies by model: e.g., Tower Bridge 113 pieces, Big Ben 220 pieces, Pagoda 275 pieces).
- English instruction manual with detailed assembly steps.
- LED light components (for models featuring illumination).
- All necessary components for assembly, except batteries.
4. Assembly Instructions
Follow these general steps for assembling your 3D wooden puzzle. Refer to the specific English instruction manual included in your kit for model-specific details and diagrams.
- Unpack: Carefully remove all wooden sheets and the instruction manual from the package.
- Identify Pieces: Familiarize yourself with the pieces by comparing them to the diagrams in the manual. The pieces are precision laser-cut and should pop out easily. Do not force pieces if they resist.
- Assemble Step-by-Step: Follow the numbered steps in the instruction manual. The assembly typically involves interlocking pieces without the need for glue or additional tools.
- LED Light Installation (if applicable): If your model includes LED lights, install them as directed in the manual. This usually involves threading wires through designated channels and securing the battery compartment.
- Connect Components: Ensure all interlocking tabs and slots are securely fitted. Gentle pressure may be required.
5. Operating Instructions (LED Lights)
For models equipped with LED lights:
- Battery Requirement: You will need to provide your own batteries. Refer to your specific model's manual for the correct battery type and quantity (e.g., AA, AAA).
- Battery Installation: Locate the battery compartment, typically at the base or a hidden section of the model. Open the compartment, insert the batteries according to the polarity indicators (+/-), and close the cover securely.
- Activation: Locate the power switch, usually a small button or toggle, on the model. Flip or press it to turn the LED lights on or off.
6. Maintenance
- Cleaning: Dust the model gently with a soft, dry cloth. Avoid using water or cleaning solutions, as they may damage the wood.
- Storage: Store the assembled model in a dry environment away from direct sunlight and extreme temperature changes to prevent warping or fading of the wood.
- Disassembly: While designed for assembly, frequent disassembly and reassembly are not recommended as it may loosen the joints over time.
7. Troubleshooting
- Missing or Defective Pieces: If you find any pieces are missing or defective upon opening the package, please contact customer support immediately.
- Pieces Not Fitting: Ensure you are using the correct pieces for the current step as indicated in the manual. Do not force pieces; check for proper alignment. If a piece is slightly tight, gentle wiggling or light sanding (with fine-grit sandpaper, not included) may help, but proceed with caution.
- LED Lights Not Working:
- Check if batteries are installed correctly with the correct polarity.
- Ensure batteries are new and fully charged.
- Verify that the power switch is in the "ON" position.
- Inspect wiring for any disconnections (if accessible and safe to do so).
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Robotime |
| Material | Wood |
| Theme | Buildings |
| Gender | Unisex |
| Origin | Mainland China |
| Recommended Age | 14+ years (8+ with adult supervision) |
| Model: Tower Bridge (TG412) | 113 pieces, Assembled Size: 14.1 x 2.9 x 4.6 inches |
| Model: Big Ben (TG507) | 220 pieces, Assembled Size: 3.9 x 4.2 x 7.5 inches |
| Model: Pagoda (TGN02) | 275 pieces |
| Package Dimensions | 36 cm (L) x 16 cm (W) x 32 cm (H) |
| Package Weight | 0.42 kg |
9. User Tips
No specific user tips were available from reviews or Q&A for this product. However, here are some general tips for an optimal building experience:
- Patience is Key: Take your time with assembly. Rushing can lead to broken pieces or incorrect connections.
- Organize Pieces: Before starting, sort pieces by number or shape to make the assembly process smoother.
- Enjoy the Process: This is a creative and educational activity. Embrace the challenge and the satisfaction of building something with your own hands.
- Personalization: Feel free to customize your model with paint or other decorative elements once assembled, if desired.
10. Warranty and Support
Robotime is committed to providing high-quality products and dedicated after-sales support. If you encounter any issues with your puzzle kit, such as missing or defective pieces, or require assistance with assembly, please do not hesitate to contact our customer service team. We are here to ensure your puzzle experience is seamless and enjoyable.
