Important Safety Information
Please read this manual carefully before operating the U`King 1200W Smoke Machine. Keep this manual for future reference.
- This product operates at high temperatures during use. Do not touch the machine directly with your hands to prevent scalding.
- Use this product in a dry environment. Prevent any liquid from penetrating the machine (except the smoke oil bottle). If accidental penetration occurs, immediately turn off the power and allow the machine to dry completely before attempting to use it again.
- Keep the machine away from flammable and explosive materials during operation.
- Ensure the smoke oil bottle is not empty. Add appropriate smoke oil immediately when the liquid level is low to prevent damage to the machine.
- Do not touch the cigarette nozzle or the bottom of the machine directly while it is working.
- After use, allow the machine to cool down completely before packaging and storing it.
- Always turn off the power when the machine is unattended.
- It is normal for some smoke to appear during the initial warm-up phase.
Product Overview
The U`King 1200W Smoke Machine is a powerful stage effect device designed to create a romantic and dynamic atmosphere for various events such as dance halls, KTV, parties, DJ sets, weddings, and banquets. It features 9 three-in-one RGB LED lamp beads for multi-color lighting effects and can be controlled wirelessly.
Front view of the U`King 1200W Smoke Machine, showing the smoke output with colorful LED lighting and the included remote control.
Rear view of the smoke machine, highlighting the ON/OFF switch, oil level indicator, wired remote jack, power socket, and fuse.
Package Contents
- Fog machine x 1
- Remote control x 1
- Signal receiver x 1
- Screw x 2
- Bracket x 1
- Instructions in five languages x 1
Setup
- Unpack: Carefully remove all components from the packaging.
- Mounting (Optional): Attach the provided bracket to the machine using the screws if you intend to hang or position the machine in a specific way.
- Fill Smoke Oil: Open the machine's oil bottle cap and carefully add appropriate smoke oil into the tank. Do not overfill.
- Connect Power: Insert the power cord into the machine's power socket and then into a suitable AC 110-240V 50-60Hz power outlet.
- Connect Remote Receiver: Insert the signal receiver for the wireless remote control into its corresponding jack on the machine.
- Power On: Turn on the machine switch. The machine will begin to warm up.
Diagram showing the dimensions of the smoke machine and a table of key specifications.
Operating Instructions
- Warm-up: After powering on, the machine will take approximately 5 minutes to warm up. Wait until the indicator light (if present) signals readiness.
- Spray Smoke: Once warmed up, press and hold the "FOG" button on the wireless remote control to spray smoke. The smoke output is approximately 1600 cubic feet per minute with a spray distance of 3-4 meters.
- Control LED Colors: Use the color buttons on the remote control to change the LED lighting effects:
- "R": Red LED + smoke
- "G": Green LED + smoke
- "B": Blue LED + smoke
- Square button: Automatic color change (gradient) + smoke
- "Flash" button: Strobe effect
- Strobe Effect: Press the "Flash" button on the remote for a strobe lighting effect.
- Automatic Cycle: The machine will automatically stop spraying smoke after about 25 seconds of continuous operation. It will then require approximately 20 seconds to reheat before it can spray smoke again.
- Power Off: When finished, turn off the machine switch and disconnect from the power supply.
Detailed view of the wireless remote control, showing buttons for LED colors (R, G, B), Flash, Strobe, Gradient, and ON/OFF for fog.
The smoke machine in operation, demonstrating the vibrant multi-color lighting effects combined with fog output.
Maintenance
- Smoke Oil Level: Regularly check the oil level in the tank. Refill with appropriate smoke oil before it runs out to prevent damage to the pump.
- Cleaning: Keep the exterior of the machine clean and free from dust. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- Storage: After each use, allow the machine to cool down completely. Store it in a dry, cool place, away from direct sunlight and moisture. Ensure it is packaged securely to prevent damage.
- Fuse Replacement: If the machine fails to power on, check the fuse located near the power socket on the back panel. Replace with a fuse of the same type and rating if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on. | No power supply; Blown fuse. | Check power connection. Replace fuse with correct rating. |
| No smoke output. | No smoke oil; Insufficient warm-up; Remote control issue. | Refill smoke oil. Allow full 5-minute warm-up. Check remote battery/signal receiver connection. |
| Smoke output is weak or inconsistent. | Low smoke oil level; Clogged nozzle; Machine needs reheating. | Refill smoke oil. Ensure nozzle is clear. Allow machine to reheat for 20 seconds after continuous use. |
| LED lights not working. | Remote control issue; Internal fault. | Check remote battery. If problem persists, contact customer support. |
| Smoke appears during initial heating. | Normal operation. | This is normal and not a fault. |
Specifications
| Feature | Detail |
|---|---|
| Brand | U`King |
| Model | ZQ10139 |
| Color | Silver and Black |
| Material | Iron |
| Voltage | AC 110-240V 50-60Hz |
| Power | 1200W |
| Light Source | 9PCS three-in-one RGB LED lamp beads |
| Warm-up Time | 5 minutes |
| Oil Bottle Capacity | 0.75 liters |
| Control Method | Wireless remote control for color changing and manual control |
| Smoke Output | 1600 cubic feet per minute |
| Smoke Spray Distance | 3-4 meters |
| Remote Control Distance | 100 meters (without interference) |
| Power Cord Length | Approx. 119 cm |
| Usage | DJ Disco Party Bar Club, Stage, Wedding, Banquet |
| Feature | Easy Installation |
| Customized | Yes |
| Certifications | CE, FCC, RoHS |
RoHS Certificate of Conformity, indicating compliance with environmental standards for stage lights.
User Tips
- For optimal smoke density and effect, ensure the machine has fully warmed up before activation.
- Experiment with different LED color combinations and the strobe function to create diverse atmospheric effects.
- Position the machine strategically to achieve the desired smoke distribution and lighting coverage for your event space.
- Always use high-quality, water-based fog fluid specifically designed for smoke machines to ensure longevity and performance.
Warranty and Support
The U`King 1200W Smoke Machine comes with a 1-year warranty from the date of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact our customer service team:
- WhatsApp: +86 18807491181
- Email: 1245011557@qq.com
Our company, Shenzhen Zhuoqiong Technology Co., Ltd, is committed to providing excellent after-sales service and support for all U`King brand products.
