COMPTYCO AUA-M9

COMPTYCO AUA-M9 Fiber Thermal Stripper User Manual

Model: AUA-M9

1. Introduction

The COMPTYCO AUA-M9 Fiber Thermal Stripper is a precision tool designed for efficient and damage-free stripping of optical fiber coatings. Featuring automatic heating and constant temperature control, it is suitable for various fiber types and core counts, enhancing working efficiency in fiber optic installations and maintenance.

COMPTYCO AUA-M9 Fiber Thermal Stripper, showing the device with a fiber inserted and control panel.

Image: The AUA-M9 Fiber Thermal Stripper, highlighting its capability for 1-48 cores and 8 temperature settings, with automatic heating and constant temperature control.

2. Product Features

  • Wide Compatibility: Adapts to multiple types of optical fibers, including 1-15 strippable bundle optical fibers, 1-48 peelable bare fibers, and strippable ribbon optical fiber (up to 4 ribbon).
  • Precise Stripping: Features a widening limit blade with precise gap control, ensuring clean coating removal without leaving traces and preventing fiber damage.
  • Automatic Heating & Temperature Control: Powers on with automatic heating and maintains constant temperature.
  • Dual Heating Modes: Offers eight levels of temperature regulation across two modes: HEATER (high temperature) and SAVEMODE (low temperature).
  • Long Battery Life: Built-in lithium battery provides extended power, capable of stripping fibers continuously for approximately 400 times on a full charge.
  • USB Fast Charging: Convenient charging via a Type-C port.
  • Efficient Operation: Can strip multiple optical fibers simultaneously, improving working efficiency.
Diagram illustrating key product features: excellent material, limiting blade, temperature adjustable, 8 temperatures, good peeling effect, and rechargeable.

Image: Visual representation of the AUA-M9's core features.

3. Package Contents

Please check the package for the following items:

  • COMPTYCO AUA-M9 Fiber Thermal Stripper (Host)
  • USB Charging Cable (Type-C)
  • Adjusting Wrench (x2)
  • Brush
  • Tweezers
  • Storage Box
  • Instruction Manual (this document)
  • Certificate
  • Packing Box
Image showing all items included in the COMPTYCO AUA-M9 Fiber Thermal Stripper package, neatly arranged.

Image: Contents of the product package, including the stripper, accessories, and documentation.

4. Specifications

Parameter Value
Product Name Optical fiber hot stripping forceps
Model Number AUA-M9
Brand Name LeeBeTo (COMPTYCO)
Applicable Fiber Cladding Diameter 25μm
Stripping Quantity
  • 1-15 Core Bundled Fiber
  • 1-48 Core Bare Fiber
  • 2-24 Core Ribbon Fiber
  • 1-12 Core Invisible Fiber
Applicable Optical Fiber Bundle fiber, bare fiber, ribbon fiber, invisible fiber
Stripping Length of Coating ≤32mm
Limit Blade Edge Width 20mm
Heating Temperature ≤160°C
Power Supply Type-C charging port
Overall Dimensions Approx. 13.5 × 4.3 × 3.2 cm
Weight Approx. 230g (device only)
Wireless Function No
High-concerned chemical None
Fiber Type Single Mode
Connector Type Hybrid
Detailed product parameter table for the AUA-M9 Fiber Thermal Stripper.

Image: Comprehensive product specifications.

Dimensions of the AUA-M9 Fiber Thermal Stripper: 13.5cm length, 4.3cm width, 3.2cm height.

Image: Physical dimensions of the AUA-M9 device.

5. Safety Information

  • WARNING: Do not touch the heating area during operation or immediately after use to avoid burns. The heating temperature can reach up to 160°C.
  • Always ensure the device is turned off and cooled down before cleaning or storing.
  • Keep the device away from water and other liquids.
  • Use only the provided USB charging cable or a compatible Type-C charger.
  • Store the device in a safe place, out of reach of children.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.

6. Setup

  1. Unpack: Carefully remove all items from the packaging and verify against the package contents list.
  2. Initial Charge: Before first use, fully charge the device using the provided USB Type-C cable and a suitable power adapter. The charging indicator will show the charging status.
  3. Familiarize Controls: Locate the power button and temperature adjustment controls on the device.

7. Operating Instructions

  1. Power On: Press and hold the power button to turn on the device. The device will automatically begin heating.
  2. Select Temperature Mode: The device offers dual heating modes with eight temperature levels. Use the 'TEMP' button to cycle through the available temperature settings (Low/High indicators). Refer to the 'Temperature Settings' section for details on specific temperatures. COMPTYCO AUA-M9 control panel showing TEMP and HEATER/SAVEMODE indicators.

    Image: Control panel with temperature indicators and power button.

  3. Insert Fiber: Open the stripper's cover. Carefully insert the optical fiber into the designated slot, ensuring it is aligned correctly with the stripping blades. The widening limit blade ensures precise positioning. Close-up of the AUA-M9's stripping mechanism, showing a fiber inserted and the precise gap control of the blade.

    Image: Fiber insertion into the stripping slot, demonstrating precise gap control.

    Diagram showing different fiber types being stripped: bundle, bare, and ribbon optical fibers.

    Image: Examples of various fiber types compatible with the stripper.

  4. Strip Fiber: Close the cover firmly. The heated blades will soften the fiber coating. Once the coating is sufficiently softened (this may vary based on fiber type and temperature setting), gently pull the fiber through the stripper to remove the coating. The blade is designed to peel fibers without damage.
  5. Repeat for Multiple Fibers: For ribbon fibers or multiple bare fibers, align them correctly in the stripping area. The device can strip multiple fibers simultaneously for improved efficiency. Image demonstrating the AUA-M9 stripping multiple optical fibers at once, highlighting improved efficiency.

    Image: Stripping multiple fibers simultaneously.

  6. Power Off: After use, press and hold the power button to turn off the device. Allow it to cool down before cleaning or storage.

8. Temperature Settings

The AUA-M9 features dual heating modes with eight distinct temperature levels, indicated by the LED lights on the control panel. Use the 'TEMP' button to switch between modes and adjust the temperature.

HEATER (High Temperature Gear) Mode:

  • Level 1: 120°C
  • Level 2: 130°C
  • Level 3: 145°C
  • Level 4: 160°C

SAVEMODE (Low Temperature Gear) Mode:

  • Level 1: 110°C
  • Level 2: 120°C
  • Level 3: 130°C
  • Level 4: 145°C
Diagram illustrating the eight temperature settings for the AUA-M9 Fiber Thermal Stripper, divided into HEATER (high) and SAVEMODE (low) modes.

Image: Temperature gear and battery indicator lights for both heating modes.

9. Charging

The AUA-M9 is equipped with a built-in lithium battery and supports USB fast charging via a Type-C port.

  1. Connect the provided USB Type-C cable to the charging port on the device.
  2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer USB port.
  3. The battery indicator lights on the control panel will show the charging status.
  4. A full charge provides approximately four hours of continuous operation, allowing for about 400 stripping cycles.
The AUA-M9 Fiber Thermal Stripper connected to a power strip via its USB Type-C charging cable.

Image: USB fast charging via Type-C port.

10. Maintenance

  • Cleaning: After each use, ensure the device is powered off and completely cooled. Use the provided brush to gently clean any fiber debris from the stripping blades and surrounding area. Use tweezers to remove stubborn particles if necessary.
  • Storage: Store the thermal stripper in its protective storage box when not in use to prevent damage and keep it free from dust and contaminants.
  • Blade Inspection: Periodically inspect the stripping blades for any signs of wear or damage. Sharp blades are crucial for clean, damage-free stripping. If blades appear dull or damaged, contact support for replacement options.
  • Battery Care: To prolong battery life, avoid completely draining the battery frequently. Charge the device regularly, even if not in constant use.

11. Troubleshooting

Problem Possible Cause Solution
Device does not power on. Low battery or no charge. Charge the device fully using the Type-C cable.
Fiber coating not stripping cleanly.
  • Incorrect temperature setting.
  • Blades are dirty or worn.
  • Fiber not properly aligned.
  • Adjust to a higher temperature setting (refer to Temperature Settings).
  • Clean the blades with the brush. If worn, contact support.
  • Re-insert and align the fiber carefully.
Device not heating. Power issue or internal fault. Ensure the device is powered on and charged. If the issue persists, contact customer support.
Battery drains quickly. Aging battery or frequent use at high temperatures. Ensure full charge before use. Consider using SAVEMODE for less demanding tasks. If battery life significantly degrades, contact support.

12. User Tips

  • Optimal Temperature: Experiment with different temperature settings to find the ideal one for your specific fiber type and coating material. Start with lower temperatures and increase if needed.
  • Cleanliness is Key: Regularly cleaning the blades and fiber guides will prevent residue buildup and ensure consistent, high-quality stripping results.
  • Gentle Pull: Always apply a steady, gentle pull when stripping the fiber. Excessive force can damage the fiber or the stripper.

13. Warranty and Support

This product is covered by a manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty validation.

Documents - COMPTYCO – AUA-M9

no relevant documents