1. Introduction
Thank you for choosing the NB North Bayou Dual Monitor Arm, models G55/G65. This monitor mount is designed to enhance your workspace ergonomics by providing full motion adjustability for two 27-34 inch monitors. Please read this manual carefully before installation and use to ensure safe and optimal performance.
2. Safety Information
- Ensure your desk surface is strong enough to support the combined weight of the mount and two monitors.
- Do not exceed the maximum weight capacity of 16kg (35.2 lbs) per arm.
- Always follow the assembly instructions precisely. Improper installation can lead to equipment damage or personal injury.
- Keep children and pets away during installation.
- Check all connections and adjustments periodically to ensure they remain secure.
3. Package Contents
Verify that all components are present before beginning assembly:
- Monitor Arm components (base, lower arms, upper arms, VESA plates)
- Desk Clamp and Grommet Mount hardware
- Assembly tools (e.g., Allen wrenches)
- Screws for VESA mounting
Figure 3.1: Exploded view of monitor arm components and technical specifications.
4. Setup and Installation
The monitor arm supports both C-clamp and grommet mounting options. Choose the method suitable for your desk.
4.1. Assembly Overview
Video 4.1: Demonstration of the assembly process and adjustability of the monitor arm.
4.2. Mounting the Base to Your Desk
- C-Clamp Installation: Attach the C-clamp to the desk edge. Ensure it is tightened securely to prevent movement.
- Grommet Mount Installation: If your desk has a grommet hole, use the provided grommet hardware to secure the base through the hole. Tighten firmly.
4.3. Assembling the Arms
- Attach the lower arm sections to the base post.
- Connect the upper arm sections to the lower arms.
- Ensure all pivot points are securely fastened but allow for movement.
4.4. Attaching Monitors
- Attach the VESA mounting plates to the back of your monitors using the appropriate screws.
- Carefully slide the VESA plate with the monitor onto the end of each monitor arm.
- Secure the monitor to the arm using the locking mechanism or screws as indicated in the video.
Figure 4.1: White monitor arm setup with a single monitor.
Figure 4.2: Black monitor arm setup with two monitors.
5. Operating Instructions
The NB North Bayou Dual Monitor Arm offers extensive adjustability to achieve your ideal viewing position:
- Height Adjustment: Use the gas spring mechanism to effortlessly raise or lower your monitors. Adjust the tension screw (usually located on the arm joint) with the provided Allen wrench if the monitor sags or springs up too easily.
- Tilt: Tilt your monitors +15° to -60° to reduce glare and optimize viewing angles.
- Swivel: Swivel the monitors ±90° horizontally to share your screen or change your viewing perspective.
- Rotation: Rotate your monitors 360° to switch between landscape and portrait orientations.
- Cable Management: Utilize the integrated cable management clips or channels along the arms to keep your cables tidy and organized.
Figure 5.1: Monitors adjusted to different orientations (landscape and portrait).
6. Maintenance
- Cleaning: Wipe the monitor arm with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Periodic Checks: Regularly check all screws and bolts to ensure they are tight. Re-tighten if necessary.
- Gas Spring Tension: If the monitor arm feels too loose or too stiff over time, re-adjust the gas spring tension screw according to the instructions in Section 5.
7. Troubleshooting
- Monitor Sags or Won't Stay Up: The gas spring tension is too low for the monitor's weight. Increase the tension by turning the adjustment screw clockwise (usually marked with a '+' or 'tighten').
- Monitor Springs Up Too Easily or Won't Go Down: The gas spring tension is too high. Decrease the tension by turning the adjustment screw counter-clockwise (usually marked with a '-' or 'loosen').
- Arm Movement is Stiff: Check if any cables are caught in the arm joints. Lubricate pivot points with a silicone-based spray if necessary.
- Monitor Wobbles: Ensure the VESA plate screws are tight and the desk mount (clamp or grommet) is securely fastened to the desk.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NB ERGONOMIC / NB North Bayou |
| Model Number | G55/G65 |
| Material | Aluminum Alloy + ABS |
| Color | Black, White |
| Compatible Screen Size | 27'' - 34'' Monitors |
| Load Capacity | 5-16kg (11-35.2 lbs) per arm |
| VESA Compatibility | 75x75mm / 100x100mm |
| Upright Height | 11" (280mm) |
| Swivel Angles | ±90° |
| Rotation | 360° |
| Tilt Angles | +15° / -60° |
| Retractable Distance | 640mm |
9. User Tips
- For optimal ergonomic benefits, position the top of your monitor screen at or slightly below eye level.
- Experiment with different monitor orientations (landscape/portrait) to find what works best for your workflow.
- Utilize the full range of motion to frequently change your viewing position and reduce strain.
- Ensure cables are routed neatly through the cable management system to prevent snagging and maintain a clean aesthetic.
10. Frequently Asked Questions (FAQ)
- Q: Are you a factory?
- A: Yes, we have been manufacturing since 2004.
- Q: Do you provide OEM/ODM services?
- A: Yes, we do provide OEM/ODM services.
11. Warranty and Support
This product comes with a standard manufacturer's warranty. For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Please retain your proof of purchase for warranty purposes.