1. Introduction
Thank you for choosing the Aigostar Cora American Coffee Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee machine. Please read it thoroughly before first use and keep it for future reference.
The Aigostar Cora is a versatile filter coffee maker designed to deliver delicious coffee with convenience. Key features include a 24-hour programmable timer, an intuitive LCD display, a generous 1.5L capacity (approximately 12-14 cups), 1000W power for quick brewing, a durable stainless steel finish, adjustable coffee strength, a 40-minute keep-warm function, and an anti-drip system for mess-free serving.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions carefully before operating the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electric shock, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to 'off', then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Use on a hard, flat, stable surface only to avoid tipping.
- This appliance is for household use only.
3. Product Components
Familiarize yourself with the parts of your Aigostar Cora Coffee Maker:

- Main Unit: Houses the heating element, water reservoir, and control panel.
- Water Reservoir: Located on the side, with a clear water level indicator (up to 12 cups / 1.5L).
- LCD Display: Digital screen showing time and programming settings.
- Control Panel: Buttons for HOUR, CLEAN, MIN, PROG (Program), STRENGTH, and ON/OFF.
- Glass Carafe: High-temperature resistant and explosion-proof, with a capacity of 1.5L (12-14 cups).
- Warming Plate: Keeps the brewed coffee warm for up to 40 minutes.
- Removable Filter Basket/Funnel: Holds the coffee filter and grounds.
- Anti-drip Valve: Prevents coffee from dripping when the carafe is removed during brewing.

4. Specifications
| Feature | Specification |
|---|---|
| Brand | AIGOSTAR |
| Model | Cora |
| Type | Filter Coffee Maker |
| Power | 1000W |
| Voltage | 220V-240V |
| Capacity | 1.5 Liters (12-14 cups) |
| Housing Material | Aluminum / Stainless Steel |
| Display | LCD Digital Display |
| Programmable Timer | 24-hour |
| Keep Warm Function | Up to 40 minutes |
| Anti-drip System | Yes |
| Certification | CE, RoHS |
| Dimensions (approx.) | 35cm (H) x 21cm (W) x 17cm (D) |

5. Setup
- Unpacking: Carefully remove all packaging materials from the coffee maker. Keep packaging for future storage or disposal.
- Initial Cleaning: Before first use, wash the glass carafe, lid, and removable filter basket in warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the coffee maker with a damp cloth.
- First Brew Cycle (without coffee): Fill the water reservoir to the 'MAX' level with fresh, cold water. Place the empty filter basket (without coffee or paper filter) into its position and close the lid. Place the empty carafe on the warming plate. Plug the appliance into a suitable power outlet. Press the 'ON/OFF' button to start a brewing cycle. Allow the full cycle to complete. Discard the water from the carafe. This cleans the internal components and removes any manufacturing residues. Repeat this process once more.
- Placement: Place the coffee maker on a stable, level, heat-resistant surface, away from the edge of the counter and out of reach of children. Ensure there is adequate ventilation around the unit.
6. Operating Instructions
6.1 Basic Coffee Brewing
- Fill Water Reservoir: Open the top lid and fill the water reservoir with fresh, cold water to your desired level, indicated by the water level gauge on the side. Do not exceed the 'MAX' line (1.5L / 12 cups).
- Insert Filter and Coffee Grounds: Place a paper filter (cone-shaped, size 4) into the removable filter basket, or use the permanent filter if provided. Add your desired amount of ground coffee. A general guideline is one tablespoon of coffee grounds per cup (150ml).
- Position Carafe: Ensure the glass carafe with its lid is correctly placed on the warming plate.
- Start Brewing: Plug the coffee maker into a power outlet. Press the 'ON/OFF' button. The indicator light will illuminate, and the brewing process will begin.
- Serving: The anti-drip feature allows you to temporarily remove the carafe to pour a cup of coffee during the brewing cycle without drips. Replace the carafe within 30 seconds to prevent overflow from the filter basket.
- Keep Warm: After brewing is complete, the warming plate will automatically keep the coffee warm for approximately 40 minutes. After 40 minutes, the coffee maker will automatically shut off.

6.2 Setting the 24-Hour Programmable Timer
The 24-hour programmable timer allows you to set the coffee maker to start brewing at a specific time.
- Set Current Time: When the coffee maker is plugged in but not brewing, the LCD will display '00:00'. Press the 'HOUR' button to adjust the hour and the 'MIN' button to adjust the minutes. Hold the buttons for faster adjustment. The clock operates in a 24-hour format.
- Program Brew Time: Press the 'PROG' button. The display will flash '00:00'. Use the 'HOUR' and 'MIN' buttons to set your desired start time for brewing.
- Confirm Program: Press the 'PROG' button again to confirm the programmed time. The 'PROG' indicator light will illuminate.
- Start Programmed Brew: Ensure the water reservoir is filled, the filter and coffee grounds are in place, and the carafe is on the warming plate. The coffee maker will automatically start brewing at the set time.

6.3 Adjusting Coffee Strength
Press the 'STRENGTH' button to cycle through different brewing strengths (e.g., Regular, Strong). The selected strength will be indicated on the display or by an indicator light. This feature adjusts the brewing process to extract more flavor for a bolder cup.
7. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your coffee maker.
- Daily Cleaning:
- Unplug the coffee maker and allow it to cool completely.
- Remove the glass carafe, lid, and filter basket. Wash these parts in warm, soapy water. Rinse thoroughly and dry. These parts are generally top-rack dishwasher safe, but hand washing is recommended for longevity.
- Wipe the exterior of the coffee maker with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Never immerse the main unit, power cord, or plug in water or any other liquid.
- Descaling (CLEAN Function):
Mineral deposits (limescale) can build up in your coffee maker over time, affecting performance and coffee taste. Descale your machine every 2-3 months, or more frequently if you have hard water.
- Fill the water reservoir with a mixture of white vinegar and water (1:2 ratio) up to the 'MAX' level.
- Place the empty carafe on the warming plate.
- Press the 'CLEAN' button. The 'CLEAN' indicator light will illuminate, and the machine will begin a descaling cycle.
- Allow the cycle to complete. The machine may pause during the cycle; this is normal.
- After the cycle, discard the vinegar solution.
- Run 2-3 full cycles with fresh, cold water only to rinse out any remaining vinegar taste.
8. Troubleshooting
If you encounter issues with your Aigostar Cora Coffee Maker, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee does not brew. | Not plugged in; power outage; 'ON/OFF' button not pressed; programmed time not reached. | Ensure unit is plugged in. Check power supply. Press 'ON/OFF'. Wait for programmed time or cancel program. |
| Coffee is too weak. | Not enough coffee grounds; coarse grind; 'STRENGTH' setting too low. | Add more coffee grounds. Use a finer grind. Select a stronger 'STRENGTH' setting. |
| Coffee is too strong. | Too many coffee grounds; fine grind; 'STRENGTH' setting too high. | Reduce coffee grounds. Use a coarser grind. Select a weaker 'STRENGTH' setting. |
| Water leaks from unit. | Water reservoir overfilled; carafe not properly seated; filter basket overflowing. | Do not exceed 'MAX' fill line. Ensure carafe is centered on warming plate. Check filter basket for clogs or too much coffee. |
| Coffee overflows from filter basket. | Too many coffee grounds; filter clogged; carafe removed for too long. | Reduce coffee grounds. Ensure filter is not clogged. Replace carafe within 30 seconds when using anti-drip. |
| Machine does not turn on. | No power; internal fault. | Check power outlet. If still not working, contact customer support. |
9. User Tips
- Pre-heat the Carafe: For hotter coffee, rinse the carafe with hot water before brewing.
- Use Fresh Water: Always use fresh, cold, filtered water for the best coffee taste.
- Grind Size Matters: For drip coffee makers, a medium grind is generally recommended. If your coffee is too weak, try a finer grind; if it's bitter, try a coarser grind.
- Regular Descaling: Don't underestimate the importance of descaling. It significantly impacts the taste of your coffee and the lifespan of your machine.
- Clean Immediately: Clean the carafe and filter basket shortly after use to prevent coffee oils from building up and affecting future brews.
10. Warranty and Support
Aigostar products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or contact the seller directly. Please have your product model and purchase date available when contacting support.