1. Introduction and Safety Disclaimer
Thank you for choosing the iScooter W6 Foldable Electric Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your scooter. Please read it thoroughly before your first ride.
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
2. Package Contents
Carefully unpack your iScooter W6 and check that all items are present and in good condition. If any items are missing or damaged, please contact your seller.
The package includes the iScooter W6 electric scooter and its accessories.
- iScooter W6 Electric Scooter
- Instruction Manual
- European Standard Charging Cable
- L-type Hexagonal Wrench
- Stand Screws (6 pieces, including 2 spares)
- Charger
- Inflatable Inner Tube
- Extension Tube
3. Product Overview
Familiarize yourself with the different parts of your iScooter W6 using the diagram below.
This diagram identifies key components of your iScooter W6, including the display, throttle, headlight, bell, brake lever, folding buckle, hanger, stem, folding knob, charging port, hook, rear fender, taillight & brake light, disc brake, and kickstand.
4. Setup
4.1 Unfolding the Scooter
- Place the scooter on a flat surface.
- Release the folding buckle/latch.
- Carefully lift the stem until it locks into the upright position. Ensure the locking mechanism is securely engaged.
- Adjust the handlebars if necessary.
The iScooter W6 features a two-step quick folding design for easy portability and multi-scene storage. Simply fold the stem down for compact transport.
4.2 Initial Charging
Before your first ride, fully charge the scooter's battery. Refer to the 'Maintenance' section for detailed charging instructions.
4.3 Tire Inflation
Ensure the tires are properly inflated to the recommended pressure for optimal performance and safety. Use the provided extension tube if needed to access the valve.
5. Operating Instructions
5.1 Power On/Off
- To Power On: Press and hold the power button on the display until the screen illuminates.
- To Power Off: Press and hold the power button until the display turns off.
5.2 LCD Intelligent Riding Display
The LCD display provides real-time information about your ride:
The intelligent LCD display provides essential riding information at a glance, including real-time speed, selected speed unit (km/h or mph), current riding mode (Walk, ECO, D, S), cruise control activation, app connection status, headlight indicator, motor overheating warning, battery level, and any error prompts.
- Real-time Speed: Your current riding speed.
- Speed Unit: Displays speed in km/h or mph.
- Riding Mode: Indicates the current speed setting (Walk, ECO, D, S).
- Cruise Control: Icon illuminates when cruise control is active.
- App Connected: Indicates if the scooter is connected to the VoltiX app.
- Headlight On: Icon shows when the headlight is active.
- Motor Overheating: Warning indicator for motor temperature.
- Battery Level: Shows remaining battery charge.
- Error Prompt: Displays error codes if an issue occurs.
5.3 Speed Modes and Adjustment
The iScooter W6 offers four distinct speed modes:
The scooter offers four speed modes (Walk, ECO, D, S) and instructions for speed adjustment.
- Walk Mode: 6 KM/H (Original speed)
- ECO Mode: 15 KM/H
- D Mode: 25 KM/H
- S Mode: 35 KM/H (Post-cracking speed)
To switch modes: Simply short-press the power button at startup to cycle through the available modes (Walk, ECO, D, S).
To break the speed limit (unlock S Mode 35 KM/H): After turning on the device, hold the brake lever and press the power button five times.
5.4 Braking System
The scooter is equipped with a dual braking system for enhanced safety.
The iScooter W6 features a front electronic brake and a rear ventilated disc brake with E-ABS anti-lock system.
- Front Electronic Brake: Activated by the left brake lever.
- Rear Disc Brake: A ventilated disc brake with E-ABS anti-lock system, also activated by the left brake lever.
Always apply brakes smoothly and gradually to avoid sudden stops, especially at higher speeds.
5.5 Lights Operation
For visibility and safety, especially during low-light conditions:
The scooter features a bright front LED headlight and a rear warning light.
- Front LED Headlight: Turn on/off via the power button (short press after scooter is on) or through the VoltiX app.
- Rear Warning Light: Functions as a taillight and brightens when the brake is applied.
5.6 VoltiX Smart App Connectivity
Enhance your riding experience by connecting your iScooter W6 to the VoltiX Smart App.
The VoltiX Smart App allows for enhanced control and convenience.
- Download the VoltiX app from your smartphone's app store.
- Ensure your scooter is powered on and Bluetooth is enabled on your phone.
- Open the app and follow the on-screen instructions to pair with your iScooter W6.
App features include: Ride Record, Cruise Control, Battery Usage monitoring, Acceleration settings, and an Intelligent Locking function.
6. Maintenance
6.1 Charging the Battery
Proper charging extends battery life and ensures safe operation.
The iScooter W6 battery features a BMS with 6-layer safety protection. Charging time is 5-6 hours.
- Connect the charger to the charging port on the scooter.
- Plug the charger into a power outlet (AC100-240V 50/60Hz).
- The charger indicator light will typically show red during charging and turn green when fully charged.
- Charging time is approximately 5-6 hours.
- The Battery Management System (BMS) provides 6-layer safety protection: Short Circuit Protection (SCP), Overcurrent Protection (OCP), Overcharge Protection (DCP), Over-discharge Protection (ODP), Temperature Protection (TP), and Low Voltage Automatic Shutdown (LVAS).
- Do not leave the scooter charging unattended for extended periods.
6.2 Tire Care
The 10-inch pneumatic tires are designed for durability and puncture resistance.
The 10-inch wear-resistant pneumatic tires feature a multi-layer design for durability.
- Regularly check tire pressure and inflate to the recommended PSI (refer to tire sidewall or specifications).
- Inspect tires for wear, cuts, or punctures before each ride.
- Use the provided inflatable inner tube and extension tube for maintenance if needed.
6.3 Cleaning and Storage
- Clean the scooter with a damp cloth. Do not use high-pressure water or corrosive cleaners.
- Store the scooter in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage, ensure the battery is charged to about 50-70% and recharge every 30-60 days to prevent deep discharge.
7. Troubleshooting
If you encounter issues with your iScooter W6, refer to the LCD display for error prompts and consult this section.
7.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery, loose connections | Charge the battery fully. Check all visible cable connections. |
| Motor overheating warning on display | Extended uphill riding, heavy load, high ambient temperature | Stop riding and allow the motor to cool down. Reduce load or avoid steep inclines. |
| Reduced range or power | Under-inflated tires, low battery, cold weather, battery degradation | Check tire pressure. Fully charge the battery. Note that battery performance decreases in cold weather. |
| Brakes feel weak or inconsistent | Worn brake pads, loose cable, air in hydraulic system (if applicable) | Inspect brake pads and replace if worn. Check brake cable tension. If issues persist, seek professional service. |
| Error prompt on LCD display | System malfunction, sensor error | Note the error code and refer to the VoltiX app or contact customer support for specific guidance. Try restarting the scooter. |
8. Specifications
Detailed technical specifications for the iScooter W6:
Detailed specifications for the iScooter W6.
| Feature | Specification |
|---|---|
| Item Code | W6 |
| Motor Power | 500W Brushless Motor |
| Battery Capacity | 36V / 7.8Ah |
| Charger Input | AC100-240V 50/60Hz |
| Charger Output | DC 42V 1.5A |
| Charging Time | 5-6 hours |
| Max Speed | 35 KM/H (after speed limit removal) |
| Max Range | 30 KM (actual range may vary based on terrain, rider weight, and speed) |
| Max Incline | 15° |
| Tire Size | 10 inch Wear-Resistant Pneumatic Tires |
| Braking System | Front Electronic Brake & Rear Disc Brake (E-ABS) |
| Folded | Yes (Two-step quick folding) |
| Unfolded Size | 112 cm (L) * 49 cm (W) * 111 cm (H) |
| Folded Size | 112 cm (L) * 49 cm (W) * 47 cm (H) |
| Net Weight | 15 kg |
| Applicable People | Unisex |
9. User Tips
- Always Wear a Helmet: Safety first! A helmet is crucial for protecting against head injuries.
- Check Tire Pressure Regularly: Proper tire inflation improves ride quality, range, and prevents punctures.
- Ride Defensively: Be aware of your surroundings, anticipate traffic, and use hand signals when turning.
- Practice Braking: Familiarize yourself with the scooter's braking response in a safe, open area before riding in traffic.
- Avoid Water: While the scooter may have some water resistance, avoid riding in heavy rain or through puddles to prevent damage to electronic components.
- Secure When Parked: Use the intelligent locking function via the VoltiX app for added security when leaving your scooter unattended.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.
