1. Introduction
Thank you for choosing our products. We are dedicated to providing high-performance and high-stability radio communication products. The Baofeng DM-1702 is a DMR dual-slot digital walkie-talkie featuring 1024 memory channels, a full-color LCD display, and full keyboard hand-tuning functionality. This manual will help you understand the radio's performance, usage, and maintenance procedures.
This digital two-way radio supports both digital and analog communication modes, ensuring a smooth transition from analog to digital products. It features AES256 encryption for secure communication, SMS functionality for text messaging, and GPS for location services.
Image: Baofeng DM-1702 Digital Mobile Radio with GPS, AES256 Encryption, Digital+Analog, Tier I & Dual Time Slot, SMS. Shows the radio and included accessories (radio, battery, antenna, charger base, charger plug, manual, box).
2. Product Overview
2.1. Components and Controls
Image: Diagram of the Baofeng DM-1702 radio with numbered components.
- Antenna
- State Indicator Lamp
- Loudspeaker
- Microphone
- LED
- MENU Button
- BACK Button
- SK1 (Side Key 1)
- PTT (Push-to-Talk) Button
- SK2 (Side Key 2)
- Mic/Spe/Write Frequency Port
- Battery Pack
2.2. Programmable Buttons
The radio features programmable shortcut keys ([SK1], [SK2], [TK1]) for operational convenience. Specific functions can be configured by the dealer.
| Button | Purpose |
|---|---|
| [PTT] Transmit button | Switch between transmission and reception. Press to speak when transmitting; release to receive. |
| Side button SK1 | Short press: Monitor function (analog channels only). Long press: Power switch, high/low power selection. |
| Side button SK2 | Short press: Quickly switch between upper/lower screens (A/B screen). |
| Top button | Long press: Enter digital contact. Short press: End emergency alarm mode. |
| Top button (Emergency Alarm) | Press and hold to activate emergency alarm mode. |
| [MENU] button | Activate menu mode, enter menu, select menu items. Press and hold to enter radio settings. |
| [▲]/[▼] buttons | Channel mode: Change channel backwards/forwards. SMS editing: Move left/right. |
| [Exit]/[Clear] button | Standby mode: Short press to switch between dual-segment single/dual-standby. Input state: Clear entered information. Press and hold: Switch channel mode or frequency mode. |
| [*] button | Press and hold to lock/unlock keyboard. DTMF function: Code word *. |
| [#] button | Input method interface: Switch input method. DTMF function: Code word #. |
| 0-9 number buttons | Numeric input. If numeric shortcut is set, jump to corresponding contact. Pinyin input: Select punctuation/letters. |
2.3. LED Indicators
The radio's LED indicators provide visual feedback on its current operating state:
| Indicator Status | Product Status |
|---|---|
| Red on | Transmitting |
| Green on | Receiving |
| Green flash | Scanning |
2.4. LCD Icons
The LCD displays various icons to indicate the radio's status:
| Icon Name | Icon | Description |
|---|---|---|
| Signal strength icon | More bars indicate stronger signal. | |
| Transmission power icon | H / L | H: High power transmission. L: Low power transmission. |
| Direct mode slot icon | CT / DCS | CT: CTCSS sub-audio. DCS: CDCSS sub-audio. |
| Speaker icon | Speaker enabled, reception effective. | |
| Relay mode icon | + / - | +: Transmission frequency is reception frequency plus bias. -: Transmission frequency is reception frequency minus bias. |
| Scan icon | → | Currently in offline state. |
| Non-priority channel | Scan is on and in normal mode. Scan stays on non-priority channel. | |
| Priority channel 1 / 2 | P1 / P2 | Scan stays on priority channel 1 / 2. |
| Battery power icon | More bars indicate more battery power. | |
| VOX icon | Voice control is turned on. | |
| Pointer icon | D / A | D: Main digital mode. A: Main analog mode. |
3. Setup
3.1. Battery Information and Charging
The Baofeng DM-1702 uses a 2200mAh Li-ion battery. For optimal performance, ensure the battery is properly charged before use.
Image: Large Capacity Battery (2200mAh) with Type-C Charging.
Charging Procedure:
- Ensure the radio is OFF before charging.
- Plug the power adapter into a power outlet.
- Plug the other end of the power adapter into the socket on the back of the charging cradle.
- Insert the battery (or the battery-equipped radio) into the charging cradle correctly.
- The indicator light on the charging cradle shows the charging status:
- Red light: In charging. If the red light flashes constantly, the battery power is too low, and the charger is in a pre-charge process. This is normal and should turn to solid red after about 30 seconds.
- Green light: Charging is completed.
- For best battery performance, charge for a minimum of 4 hours on the first charge.
Battery Safety Attention:
- Do not allow metal contacts (coins, keys, jewelry) to touch the battery contacts or pole pieces to prevent short circuits, discharge, heat, or leakage.
- Do not short-circuit battery terminals or discard the battery in fire.
- Do not disassemble the battery pack.
- Dispose of discarded batteries in a dedicated battery recycling box.
Battery Normal Operation Instructions:
- Charge the battery indoors at room temperature.
- Remove the battery once the charger indicator turns green.
- You can charge the battery while it's installed in the walkie-talkie, but it's best to turn off the radio to ensure a full charge.
- Do not charge the battery if its power is not fully used up (unless the voice prompt alarm is given), as this shortens battery life.
- Do not put a fully charged battery back on the charger to "power up" again, as this significantly reduces the battery's cycle life.
Battery Storage:
- For long-term storage, fully charge the battery to prevent over-discharge.
- When storing, remove the battery and recharge every 6 months.
- Store the battery at room temperature in a cool, dry place to minimize self-discharge.
Battery Voltage & Power Indication:
If the [battery power prompt] shortcut key is set, you can press and hold it to check the remaining battery power via LED indicator, tone, and battery icon. The top right of the screen shows the current battery power icon:
| Battery Icon | Battery Power |
|---|---|
| Full bars | High |
| Mid bars | Medium |
| Low bars | Low |
| Empty bars | Insufficient |
4. Operating Instructions
4.1. Power On and Off
To turn on: Rotate the [Power Switch / Volume Control] knob clockwise until you hear a "click" and a short beep. If voice announcement is enabled, the channel will be broadcast.
To turn off: Rotate the knob counter-clockwise until you hear a "click".
Note: If the tone function is disabled, there will be no boot tone. If all LEDs are disabled, the transmit/receive light will not come on during turning on, but a short beep indicates successful boot detection.
4.2. Volume Adjustment
Rotate the [Power Switch / Volume Control] knob clockwise to increase volume, and counter-clockwise to decrease. The LCD will display a volume bar.
4.3. Menu Navigation and Input
Menu Navigation:
Press the [MENU] key to enter the main menu. Use [▲]/[▼] keys to navigate submenus or options, then press [MENU] to confirm. The menu will auto-reset to standby if inactive for a preprogrammed time.
Input Methods:
The radio supports English, Simplified Chinese Pinyin, and Number input methods for user aliases, IDs, and SMS.
- English Input: Press [#] to switch between uppercase (ABC) and lowercase (abc). Use number buttons repeatedly for desired letters.
- Pinyin Input: Press [#] to switch to Pinyin (PY). Enter Pinyin using number buttons, then use [▲]/[▼] to select. Press [MENU] to move to character selection, use [▲]/[▼] to select, and [MENU] to confirm.
- Number Input: Press [#] to switch to number input (123).
- Special Characters: Press [1] for punctuation and special characters. Press [0] for space. Use [▲]/[▼] to move the cursor left/right in text editing.
4.4. Channel and Mode Selection
Selecting Region:
A region is a channel group with similar attributes. The unit supports up to 250 regions, each with up to 64 channels. Select a region via programmable button (if set) or through the menu: [MENU] > [▲]/[▼] to 'Area' > [MENU] to select from the list.
Note: The walkie-talkie must retain at least one area, and each area retains at least one channel.
Digital and Analog Channel Switch:
Each channel can be configured as either analog or digital. If the current region contains both, you can switch between them.
Single / Dual Band Mode Switch:
If the [up and down screen switching] shortcut key (A/B key) is set, press it to switch between upper/lower screens. In standby, press [A/B] to switch primary/secondary channels.
Note: The ARTS Auxiliary function does not work because the dual keep mode is in the primary and secondary channel scanning status, DTMF, auto-scan and work alone.
4.5. Making and Receiving Calls
Select Channel, User ID, Group Call ID:
In channel mode, if multiple regions exist, select the desired region, then use [▲]/[▼] to select the desired channel, user alias/ID, or group alias/ID.
Receive and Reply Group Calls:
- Transceiver must be configured to belong to the talk group.
- LED indicator is green.
- Screen displays RSSI, group alias, group call icon, received target band (CH A or CH B), and caller ID (digital mode only).
- Hold radio 1-2 inches (2.5-5.0 cm) from mouth. If "Channel Free Tone" is enabled, a short beep indicates channel is idle.
- Press [PTT] during call hold time to reply (LED red).
- Release [PTT] to answer.
- If no voice activity, call terminates.
Note: If the walkie talkie receives a group call and is not at home at this time, it remains on the current screen until the call is answered.
Receive and Reply Single Call:
A single call is an individual call. Two types: presence test before call, or immediate call.
- LED indicator is green.
- Screen displays RSSI, single call, single call icon, received target band (CH A or CH B), and user alias/ID (digital mode only).
- Hold radio 1-2 inches (2.5-5.0 cm) from mouth. If "Channel Idle Tone" is enabled, a short beep indicates channel is free.
- Press [PTT] during call hold time to reply (LED red).
- Release [PTT] to answer.
- If no voice activity, call terminates.
Receive All Call:
An all call is an individual call to all walkie-talkies on the channel, used for important notices.
- LED indicator is green.
- Screen displays RSSI, first line displays the full call, full call icon, received target band (CH A or CH B), and user alias/ID (digital mode only).
- After termination, radio returns to screen. If "channel idle tone" is enabled, a short tone indicates channel is ready, but you cannot reply to all calls.
Note: If you switch channels during an all call, the transceiver stops receiving. Preprogrammed keys are unavailable during a full call.
Start a Walkie-Talkie Call:
Choose a channel, user ID, or talk group:
- Channel mode: Press [▲]/[▼] to select.
- Pre-programmed one-touch call button.
- Address book list.
Select Channel to Initiate a Call (Group Call):
- Transceiver must be configured to belong to the talk group.
- Channel mode: Press [▲]/[▼] to select the activated talkgroup alias or ID.
- Hold radio 1-2 inches (2.5-5.0 cm) from mouth.
- Press [PTT] to initiate (LED red). Screen displays talk group alias/ID and group call icon.
- Release [PTT] to answer. When target radio replies, LED green.
- If "Channel Idle Tone" is enabled, a short beep indicates channel is free. Press [PTT] to answer, or if no voice activity, call terminates.
- Radio returns to screen. Group calls can also be initiated from address book.
Start a Single Call:
- Channel mode: Press [▲]/[▼] to select the activated talkgroup alias or ID.
- Hold radio 1-2 inches (2.5-5.0 cm) from mouth.
- Press [PTT] to initiate (LED red). Top line shows RSSI, first line shows single call, single call icon, and user alias/ID (digital mode only).
- Release [PTT] to answer. When target radio replies, LED green.
Initiate All Call:
This feature signals all users on the channel. The walkie-talkie must be programmed to allow this feature.
- Channel mode: Press [▲]/[▼] to select the activated all-call group alias or ID.
- Hold radio 1-2 inches (2.5-5.0 cm) from mouth.
- Press [PTT] to initiate (LED red). Screen displays all-call group alias/ID and all-call icon.
Note: Channel users cannot reply to all calls.
Use One-Touch Call Button:
One-touch calling simplifies group or single calls to predefined aliases/IDs. This function can be assigned to short or long programmable keys.
- Press the preprogrammed one-touch call button to initiate a group or single call.
- Hold radio 1-2 inches (2.5-5.0 cm) from mouth.
- Press [PTT] to initiate (LED red). Screen displays talk group/user alias/ID and group call/callout icon.
- Release [PTT] to answer. When target radio replies, LED green.
- If "Channel Idle Tone" is enabled, a short beep indicates channel is free. Press [PTT] to answer, or if no voice activity, call terminates.
- Radio returns to screen.
Analog Channel Call:
On an analog channel, hold down [PTT] and speak into the microphone to transmit. Release [PTT] to receive.
DTMF Call:
Make a call: Under analog channel, press and hold [PTT] and press keypad number key.
Under analog channel, long press [#] to switch to manual dialing mode, enter desired number, short press [PTT] to start DTMF call.
Receive calls: If DTMF is configured as the receiving signaling system, successful decoding of the code word (personal ID) allows communication during the resetting time.
4.6. Emergency Alarm Function
This feature allows you to request help in emergencies. Emergency alarm has the highest priority and can be activated whether the radio is transmitting or receiving.
Alarm Type:
| Alarm Type | Description |
|---|---|
| Disable | Alarm function is off. |
| Only whistle | Terminal emits a sharp alarm tone; control center does not receive signal. |
| Conventional | Radio gives audible and visual prompt. |
| Alarm whistle | Local alarm tone sounds after sending alert signal; indications of sound and visualization. |
| Silent | No audible or visual prompt. No sound on received audio. |
| Silence with voice | No audible or visual prompt. Radio sounds when PTT is pressed to initiate/respond to call. |
Note: The alarm function is enabled by the dealer.
Alarm Mode Descriptions:
| Alarm Mode | Description |
|---|---|
| Emergency alarm | Press and hold [Emergency mode on] to send alarm tone to partners/control center; cannot talk. |
| Emergency alarm and call | Press and hold [Emergency mode on] to send alarm tone, then press and hold [PTT] to speak; voice and background sound sent. |
| Emergency alarm and voice | Press and hold [Emergency mode on] to enter alarm transmission channel. Radio automatically activates "emergency microphone" (no PTT hold); voice and background sound sent. |
Send Emergency Alert:
Sends a non-voice signal to trigger a prompt on another transceiver.
- Press the preprogrammed [Alarm On] button.
- Screen displays "Send Alert" alternating with radio ID. LED is red, emergency call icon appears.
- Upon confirmation, emergency call tone sounds, LED flashes green, screen shows successful. If no confirmation, beep sounds, screen shows failed.
- Radio exits emergency alert mode and returns to home screen.
Receive Emergency Alert:
- Screen displays number of alerts received, alternating with sender's alias/ID.
- Beep sounds, LED flashes orange.
- If enabled, transceiver automatically acknowledges. Screen displays prompt until acknowledgment is sent and emergency mode exits.
Note: When an alarm sounds, LED flashes orange. Any key can stop the alarm tone. Emergency mode is released by switching channels or turning off the radio.
Send Emergency Alert with Voice Follow:
Sends an alert, and after confirmation, the microphone is automatically activated for communication without pressing [PTT] (called "Emergency Microphone").
- Press the preprogrammed [Alarm On] button.
- Screen displays "send an alert", LED red, emergency call icon displayed.
- Upon confirmation, "send successfully" message, LED red, radio activates and emits signal, speaks clearly until end of thermal mic.
- If request fails, "No Reply" message, radio continues sending alerts.
- Hot mic duration ends, screen displays "Emergency Call", contact/intercom ID alternate, LED orange, local alarm tone until end of reception.
- After calls complete, radio stays on emergency call alarm interface.
Note: Press the pre-programmed [Emergency Mode Off] button to cancel alarm, or switch channels.
Receive an Alert Call:
The receiving radio must be selected to the pre-programmed alarm-jump channel (which must be a group call).
- Screen displays "Alarm Received" alternating with sender's alias/ID.
- Alarm tone sounds, LED flashes orange.
- Alarm tone stops, LED green, enters receiving state, listens to speech.
- When alarm tone sounds, LED flashes orange. Hold intercom 1-2 inches (2.5-5.0 cm) from mouth.
- Press [PTT] to initiate call, LED red, talk group icon appears.
- Release [PTT] to answer.
Restart Emergency Mode:
If the transceiver is in emergency mode and changes channel, it exits emergency mode. If an emergency alert is activated on the new channel, it resumes the emergency call.
Initiate an Emergency Call (without code):
After alarm activation, the alarm code is not required. The microphone is automatically activated ("hot mic").
- Press the pre-programmed [Emergency Mode On] button.
- LED red, emergency call icon appears.
- Radio activates and emits signal, speaks clearly until end of thermal mic.
- Hot mic duration ends, screen displays "Emergency Call", contact/intercom ID alternate, LED orange until end of reception.
Receiving an Emergency Call (without code):
The receiving radio must be selected to the pre-programmed alarm-jump channel (which must be a group call).
- Screen displays talk group icon and sender's alias/ID.
- LED green, listens until transmitter's thermal mic duration ends.
- With LED off, hold intercom 1-2 inches (2.5-5.0 cm) from mouth.
- Press [PTT] to initiate call, LED red, talk group icon appears.
Restart Emergency Mode (without code):
If the transceiver is in emergency mode and changes channel, it will exit emergency mode. If an emergency alert is activated on the new channel, the transceiver resumes the emergency call.
Exit Emergency Mode:
The transceiver exits emergency mode when:
- Emergency alert confirmation is received.
- Number of major attempts to send an alert is reached.
- Preprogrammed [Alarm Off] is pressed.
- [PTT] key is pressed.
Note: If the radio is turned off, it exits emergency mode. It will not resume upon turning on again.
4.7. Individual Operation (Lone Worker)
This feature is for lone workers. If you cannot operate the radio within a preset time during individual operation, the radio will automatically send an alarm to your partner or control center.
Turn on Individual Operation:
Enabled via writing frequency software when the radio starts, or by pressing the preset [Individual Operation] shortcut.
Turn off Individual Operation:
Turn off via writing frequency software, or by pressing the preset [Individual Operation] shortcut again.
Note: If not turned off before shutdown, the function remains active on next power-on.
4.8. SMS Function
The radio supports DMR data function, allowing sending and receiving messages. It can store up to 100 incoming and 100 sent messages. Maximum message length is 220 characters, with up to 50 lines.
Image: SMS Function for convenient text communication.
Edit and Send Messages:
- [MENU] > 'Message' > [MENU] > 'Writing message' > [MENU].
- Input SMS using keyboard. Use [▲]/[▼] to move cursor, delete characters.
- After writing, [MENU] to return, find contacts, [MENU] to select.
- [▲]/[▼] to desired user alias/ID, [MENU] to select. Or enter manually.
- Screen displays "SMS sending...".
- If successful, "SMS is sent successfully". If failed, high pitched tone, "SMS failure".
Send Shortcut Text:
The radio supports up to 20 fast text messages preprogrammed by agents. These can be edited before sending.
- [MENU] > 'Message' > [MENU] > 'Shortcut message' > [MENU].
- [▲]/[▼] to needed shortcut message, [MENU] to select.
- [▲]/[▼] to display text content with cursor. Edit if needed.
- [MENU] to confirm, select send and save.
- After sending, [▲]/[▼] to contacts, [▲]/[▼] to desired user alias/ID, [MENU] to select. Or enter manually.
- Screen displays "SMS sending...".
Using One-Calling Key to Send Shortcut Text:
- Press the preset [one-calling key] shortcut.
- Screen displays "Message is sending...".
- If successful, "SMS is sent successfully". If failed, high pitched tone, "SMS failure".
Manage Unsuccessfully Sent Short Messages:
In the resend selection screen, options include: Resend, Forward, Edit, Delete.
Resend Message:
- View sent text messages, [MENU] again.
- [▲]/[▼] to 'Resend', [MENU] to select.
- Screen displays "Message is sending...", confirm send to same target radio.
- If successful, "SMS is sent successfully". If failed, high pitched tone, "SMS failure".
Forward Message:
Select and forward message to another user/call group alias or ID.
- [▲]/[▼] to 'Reply', [MENU] to select, find contacts.
- [▲]/[▼] to desired user alias/ID, [MENU] to select. Or enter manually.
- Screen displays "Message is sending...".
- If successful, "SMS is sent successfully". If failed, high pitched tone, "SMS failure".
Manage Outgoing Sent Messages (Outbox):
Sent messages are saved in the "outbox". The latest sent SMS is always added to the top. The outbox stores up to 100 messages. When full, the oldest message is automatically replaced.
View Sent Message:
- [MENU] > 'Message' > [MENU] > 'Outbox' > [MENU].
- [▲]/[▼] to browse SMS list.
- [MENU] to select and read current message, then [MENU] to resend, forward, edit or delete.
Delete All Sent SMS in the "Outbox":
- [MENU] > 'Message' > [MENU] > 'Delete message' > [MENU].
- [▲]/[▼] to 'Outbox' > [MENU].
- [MENU] when prompted "Delete the outbox?", screen displays "SMS has been deleted".
Receive Message:
When radio receives short messages, screen displays "receive short messages".
Note: If promo screen is displayed and [PTT] is pressed, radio exits SMS prompt and creates a single call or group call.
View Message (Inbox):
- Radio sends short message alert, screen displays "receive SMS".
- Read short messages by pressing [MENU] to confirm.
- [MENU] to return to inbox. Or [MENU] to reply, forward, edit and delete.
Manage Incoming Message (Inbox):
Inbox stores up to 100 messages. Options: Reply, Forward, Edit, Delete.
View Message in the Inbox:
- [MENU] > 'Message' > [MENU] > 'Inbox' > [MENU].
- [▲]/[▼] to browse SMS list.
- [MENU] to select and read current message, then [MENU] to reply, forward, edit or delete.
Reply Short Message in the Inbox:
- [MENU] > 'Message' > [MENU] > 'Inbox' > [MENU].
- [▲]/[▼] to required message, [MENU] to select.
- [MENU] to select and browse current SMS.
- [MENU] again to enter submenu.
- [▲]/[▼] to 'Reply', [MENU] to select. Edit message.
- After writing, [MENU] > [▲]/[▼] to 'Send'.
- If successful, "SMS is sent successfully". If failed, "SMS failure".
Delete Messages from the Inbox:
- [MENU] > 'Message' > [MENU] > 'Delete message' > [MENU].
- [▲]/[▼] to 'Inbox' > [MENU].
- [▲]/[▼] to required message, [MENU] to select.
- [MENU] when prompted "confirm to delete?", screen displays "SMS has been deleted".
Delete All Messages in the Inbox:
- [MENU] > 'Message' > [MENU] > 'Delete message' > [MENU].
- [▲]/[▼] to 'Inbox' > [MENU].
- [MENU] when prompted "delete inbox?", screen displays "SMS has been deleted".
4.9. Encryption (AES256)
Encryption secures voice or data end-to-end, preventing eavesdropping. The DM-1702 supports AES256 encryption.
Image: AES256 Encryption for secure and reliable communication.
To decrypt, the radio must have the same "encrypted key" as the transmitting radio. If a different key is used, you will hear messy transmission sound.
Press the preset [encryption] key to turn encryption on or off.
Note: In conventional mode, open encryption applies to the current channel. When switching channels, encryption automatically turns on.
4.10. ANI Identity Code Display
In analog mode, PTT ID can be configured via writing frequency software. When receiving a DTMF signal, the ANI identity code will be displayed.
4.11. Scanning
Scanning allows the radio to detect activity on channels in a preprogrammed scan list.
Image: 1024 Channels available for scanning.
Scan List:
The radio supports up to 250 scan lists, each with a maximum of 32 channels. Lists can mix analog and digital channels, and channels can be added/removed or prioritized.
Start and Stop Scanning:
Press the preset [scan switch] key or use the menu function:
- Select a preprogrammed scan list channel.
- [MENU] > 'Scan' > [MENU] > 'Scan switch' > [MENU].
- [▲]/[▼] to 'Open', [MENU] to confirm and activate. LED flashes orange, scan icon appears.
- To close, [▲]/[▼] to 'Close', [MENU] to confirm. LED turns off, scan icon disappears.
View/Add a Scan List:
- Select a preprogrammed scan list channel.
- [MENU] > 'Scan' > [MENU] > 'Scan list' > [MENU].
- [▲]/[▼] to desired scan list, [MENU] to select.
- [▲]/[▼] to 'Edit/view' menu, [MENU] to select.
- [▲]/[▼] to view channels, [MENU] to set/delete priority. Or 'add channel'.
Note: If priority is set, [P1] or [P2] icon appears. A scan list should not have multiple priority 1 or 2 channels.
Scanning Instructions and Methods:
When scanning, the radio checks the current channel for voice activity. LED flashes orange, scan icon appears. During hybrid scan, if an analog channel is locked, radio switches to analog mode for call duration.
Two types:
- Manual Scanning: Starts via preprogrammed key or menu function. Detects all channels/groups in scan list.
- Automatic Scanning: Starts when a channel/conversation group with activated automatic scanning is selected.
Scanning Reply:
When activity is detected, the radio stays on the channel/group for a preprogrammed "scan hanging time". LED is green. Scan stays on non-priority channel (icon ) or priority channel (P1/P2 icon).
- Hold radio vertically, 1-2 inches (2.5-5 cm) from mouth. If "channel available hint" is enabled, a short note indicates channel is available.
- Press [PTT] during hanging time (LED red).
- Release [PTT] to listen.
- If no response within hanging time, radio continues scanning.
4.12. Menu Settings
The setting menu includes Radio Set, Radio Info, and Radio Cfg. Access via [MENU] > 'Settings' > 'Radio Set'.
Talk Around:
Allows direct communication between two terminals if repeater fails or is out of range, but terminals are within each other's communication range. Press the pre-programmed [Repeater / Off] shortcut button to toggle offline function.
Tones/Alerts:
Contains options for Silence, Keypad Tone, Low power tone, SMS alert tone, Single call tone, Group call tone, and Channel Notify.
- Silence: Enable/disable radio mute (except emergency warning). [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Tones/Alerts' > [MENU] > 'Silence' > [MENU] > 'On'/'Off'.
- Keypad Tone: Activate/deactivate keystrokes. [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Tones/Alerts' > [MENU] > 'Keypad Tone' > [MENU] > 'On'/'Off'.
- Channel Notify: Activate/deactivate channel notification. [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Tones/Alerts' > [MENU] > 'Channel Notify' > [MENU] > 'On'/'Off'.
Note: After Radio silence is on, all key tones and channel announcements are turned off. When Channel Notify is on, the channel number is broadcasted when the radio is switched on or channels are switched.
TX Power:
Quickly switch between high/medium/low power. Low power saves energy for shorter distances. Set transmitting power level for each channel.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'TX power' > [MENU].
- Follow screen prompt to change settings. [MENU] to select new power level.
Note: 'H' indicates high power; 'M' medium; 'L' low.
Set Backlight:
Turn screen backlight on/off. Affects menu and numeric keyboard backlight. Switches via pre-programmed backlight automatic on-off key.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Backlight' > [MENU].
- Screen indicates options: 'normally open', 'normally off', '5S', '10S', '15S'. [MENU] to select.
Backlight Delay Time Setting:
Applies only to backlight timing mode.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Backlight' > [MENU] > 'Backlight Delay' > [MENU].
- [▲]/[▼] to select delay time (05 to 15 seconds), [MENU] to confirm.
Note: If backlight is set to timed off (5S-15S), screen turns off after corresponding time without user operation.
Squelch:
Adjusts squelch level to filter unusable calls or background noise. Default is regular filtering.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Squelch' > [MENU].
- Choose 'strict' or 'normal', [MENU] to select.
Screen (Boot Screen):
Enable/disable boot screen display.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Screen' > [MENU].
- [▲]/[▼] to 'images' or 'default character', [MENU] to enable.
Note: Boot screen can be set to simple images or short characters by software.
Keypad Lock:
Prevents accidental keystrokes. Methods: manual or automatic (5S, 10S, 15S options).
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Keypad Lock' > [MENU].
- [▲]/[▼] to 'on/off', [MENU] to select.
Keypad Lock Delay Time:
Applies only to automatic lock keyboard.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Keypad Lock' > [MENU] > 'Keypad delay' > [MENU].
- [▲]/[▼] to select delay time (5 to 15 seconds), [MENU] to confirm.
Note: Unlock via preprogrammed [KeyPad Lock] shortcut. Automatic lock engages if no operation within set time.
Language:
Supports Chinese and English.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Language' > [MENU].
- [▲]/[▼] to select language, [MENU] to confirm.
Note: If channel notify is on, channel numbers will be announced in the selected language.
Turn LED On or Off:
Enable/disable LED indicator light.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'LED indicator light' > [MENU].
- Screen displays 'open'/'off'. [MENU] to enable/disable.
Note: If LED indicator is off, transmitting and receiving indicators are off.
VOX (Voice Operated Exchange):
Initiates voice activation for hands-free calls on programmed channels. Radio transmits automatically when voice is detected.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'VOX' > [MENU].
- Screen displays 'open'/'off'. [MENU] to enable/disable.
Note: Pressing [PTT] during radio operation disables VOX. To re-enable, close/re-open radio or change channel.
Gain Level (VOX):
Higher gain level means higher voice level and lower sensitivity. Higher voice volume means higher voice control level.
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'VOX' > [MENU].
- Screen shows "voice control switch" and "gain level" selection.
- [▲]/[▼] to select gain level, [MENU] to confirm.
Note: Adjust gain level according to environment and speech volume. Level 1 is highest sensitivity, Level 9 is lowest.
Clock:
Displays local time, time details, and time format. Settings include time and date.
Note: Clock can be calibrated by RTC function of writing frequency software.
Set Time:
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Clock' > [MENU] > 'Time' > [MENU].
- [MENU] to enter time setting mode.
- [▲]/[▼] to move and choose number, type new number.
- [MENU] to save.
Set Date:
- [MENU] > 'Set' > [MENU] > 'Radio setting' > [MENU] > 'Clock' > [MENU] > 'Date' > [MENU].
- [MENU] to enter date setting mode.
- [▲]/[▼] to move and choose number, type new number.
- [MENU] to save.
Match Single Call:
Allows the radio to communicate directly without matching all single call IDs.
- [MENU] > 'Setting' > [MENU] > 'Radio Setting' > [MENU] > 'Single call' > [MENU].
- LCD indicates 'ON/OFF' options. Select 'ON' to start, 'OFF' to end.
Match Group Call:
Allows the radio to communicate directly without matching all group call IDs.
- [MENU] > 'Setting' > [MENU] > 'Radio Setting' > [MENU] > 'Group call' > [MENU].
- LCD indicates 'ON/OFF' options. Select 'ON' to start, 'OFF' to end.
Voice Recorder (Optional):
Records communication. Depends on firmware version. Can record up to five hours.
Voice Recorder ON-OFF:
- [MENU] > 'Setting' > [MENU] > 'Radio Setting' > [MENU] > 'Recording' > [MENU] > 'Setting' > [MENU] > 'ON/OFF' > [MENU].
After starting, radio records every call and saves to record menu.
Voice Recorder Selection:
Select to record incoming, outgoing, or both.
- [MENU] > 'Setting' > [MENU] > 'Radio Setting' > [MENU] > 'Recording' > [MENU] > 'Setting' > [MENU] > 'Record selection' > [MENU].
- LCD indicates 'Receive record', 'Transmit record', 'Receive/transmit record'. Select and [MENU] to confirm.
Voice Recording List Check and Playback:
Manage recordings: playback, deletion, view properties.
- [MENU] > 'Setting' > [MENU] > 'Radio Setting' > [MENU] > 'Recording' > [MENU] > 'List' > [MENU].
- LCD indicates catalog. [▲]/[▼] to select file, [MENU] to select.
- Options: 'Play', 'Delete', 'Detail'.
Radio Information Search:
Search radio number (owner name, serial number), radio version (firmware, CPS version).
Note: Press [BACK] to return to previous screen.
Check Radio ID:
- [MENU] > 'Setting' > [MENU] > 'Radio information' > [MENU] > 'Radio number' > [MENU].
- LCD indicates owner's name and radio ID.
Check Radio Version:
Check firmware and CPS version information.
- [MENU] > 'Setting' > [MENU] > 'Radio information' > [MENU] > 'Radio version' > [MENU].
- LCD indicates current firmware and CPS version.
Radio Configuration:
Mainly for editing channel content. Path: [Settings] > [Radio configuration].
Receiving Frequency:
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'Receiving frequency' > [MENU].
- LCD indicates receiving frequency. [MENU] to select.
- [BACK] to delete previous number, input new frequency.
- [MENU] to confirm.
Note: If frequency is out of range, "Input out of range" will be displayed.
Transmitting Frequency:
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'Transmitting frequency' > [MENU].
- LCD indicates transmitting frequency. [MENU] to select.
- [BACK] to delete previous number, input new frequency.
- [MENU] to confirm.
Note: If frequency is out of range, "Input out of range" will be displayed.
Transmit Time-Out Timer:
Prevents long channel occupation. If continuous transmission exceeds set time, radio stops transmitting and warns. Press [PTT] again after a period to transmit.
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'Transmit time-out timer' > [MENU].
- LCD indicates 'TOT':XXX. [▲]/[▼] to select option (additive increase in 5S), [MENU] to select.
Note: Invalid in emergency alarm mode.
Transmitting Contacts:
Only modifiable under digital channels.
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'Transmitting contacts' > [MENU].
- [▲]/[▼] to select contacts, [MENU] to select.
- LCD indicates "Set successfully".
Color Code:
Same color code is needed for communicating terminals. Integer 0-15. Only set in digital mode.
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'Color code' > [MENU].
- [▲]/[▼] to select color code, [MENU] to select.
- LCD indicates "Set successfully".
Time Slot:
Time slot for voice call and data transmission (slot 1 or 2). Only set under digital channel.
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'Time slot' > [MENU].
- [▲]/[▼] to select time slot, [MENU] to select.
- LCD indicates "bs time slot has been set".
Note: In dual-capacity direct mode, host digital channel can be on/off. Radios in same distribution group must use same time slot.
CTCSS (Continuous Tone-Coded Squelch System):
Set only under analog channel. Includes CTCSS encode and decode.
Transmitting CTCSS/DCS:
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'CTCSS' > [MENU] > 'Transmitting CTCSS' > [MENU].
- LCD indicates options: 'None', 'CTCSS', 'DCS_N', 'DCS_I'. Select option, [MENU] to confirm.
Receiving CTCSS/DCS:
- [MENU] > 'Setting' > [MENU] > 'Radio setting' > [MENU] > 'CTCSS' > [MENU] > 'Receiving CTCSS' > [MENU].
- LCD indicates options: 'None', 'CTCSS', 'DCS_N', 'DCS_I'. Select option, [MENU] to confirm.
4.13. Remote Monitor and Control
Initiate Remote Monitor:
- [MENU] > 'Contact list' > [MENU].
- [▲]/[▼] to desired user alias/ID, [MENU] to select. Or enter manually.
- [▲]/[▼] to 'Remote monitor', [MENU] to select.
- LED red. If successful, "Remote moni success"; if failed, "Remote moni fail".
Receive Remote Monitor:
After receiving command, radio automatically transmits voice and environment background sound, then exits.
Note: This function works only if set and turned on by writing-frequency software.
Radio Remote Kill:
In digital mode, send a remote inhibit command to a contact to disable their radio.
- [MENU] > 'Contact list' > [MENU] > 'Digital contact list' > [MENU].
- [▲]/[▼] to desired user alias/ID (single number), [MENU] to select.
- [▲]/[▼] to 'Application function' > [MENU] > 'Remote kill' > [MENU].
- LED red. If confirmation received, prompt tone, "radio will be remote killed successfully". If no confirmation, prompt, "remote kill fails".
Receive Remote Kill:
LCD displays white screen, "Remote kill". Radio is dead until activated again.
Note: This function works only if set and turned on by writing-frequency software.
Radio Activation:
In digital mode, send an activation command to resume normal use.
- [MENU] > 'Contact list' > [MENU] > 'Digital contact list' > [MENU].
- [▲]/[▼] to desired user alias/ID (single number), [MENU] to select.
- [▲]/[▼] to 'Application function' > [MENU] > 'Radio activation' > [MENU].
- LED red. If confirmation received, prompt tone, "radio will be activated successfully". If no confirmation, prompt, "radio activation fails".
Receive Radio Activation:
After receiving command, prompt tone, turn off and turn on radio again.
5. Maintenance
5.1. General Maintenance
- Do not store the radio in corrosive environments.
- Do not lift the radio by the antenna or external microphone.
- Cover appendage interface when not in use.
5.2. Cleaning
- Use a clean, dry cloth or brush to wipe the walkie-talkie surface and charging pole regularly.
- Wipe dirt with a dust-free, lint-free cloth to prevent poor contact.
- For dirty buttons, knobs, and chassis, use neutral detergent and a wet cloth. Ensure radio is completely dry after cleaning.
- Attach cover on socket when walkie-talkie is not in use.
Note: Turn off the radio and remove the battery before cleaning.
6. Troubleshooting
If you encounter issues with your Baofeng DM-1702, refer to the table below for common problems and solutions.
| Problem | Reason | Solution |
|---|---|---|
| Radio doesn't start | Battery not installed correctly, battery runs out, poor battery contact. | Remove and re-install battery, charge or change battery, clean contacts. |
| Sound is small/intermittent, or no sound when receiving | Battery voltage low, voice too small, antenna loose, speaker damaged/dirty. | Charge or change battery, turn up sound, re-install antenna, clear/repair speaker. |
| Cannot talk with members in same group | Frequency different, in different digital/analog channels, too far away. | Reset to same frequency, correct to same channel, get closer. |
| Single/group call doesn't work in digital channel | Different frequency/channel/color code/time slot. | Set same frequency/channel/color code/time slot. |
| Other sound in channel (not from members) | Interference from same frequency, signal not set. | Change to new frequency, correct squelch, set signal for all radios. |
| Loud noise | Too far away, poor location (blocked by buildings/basement), environmental/electromagnetic interference. | Get closer, move to open environment, restart radio, avoid interfering devices. |
Note: If problems persist, contact your local distributor for technical support.
7. Specifications
The following table details the main technical parameters of the Baofeng DM-1702 GPS Digital Mobile Radio.
| Parameter | Value |
|---|---|
| Frequency Range | VHF: 136-174MHz, UHF: 400-470MHz (Dual Band) |
| Storage Channel | Up to 1024 |
| Frequency Stability | ±1.0ppm |
| Operating Temperature | -30°C ~ +60°C |
| Operating Voltage | DC 7.4V |
| Dimensions (excluding antenna) | 136*62*36mm |
| Weight (including battery and antenna) | About 274g |
| Battery Capacity | 2200mAh |
| Output Power | High: 5W / Low: 1W |
| Output Consumption | Analog≤1.6A, Digital≤0.9A |
| FM Modulation (wide/narrow) | 16K¢F3E@25KHz, 141K¢F3E@20KHz, 11K¢F3E@12.5KHz |
| 4FSK Digital Modulation | 12.5KHz for data: 7K60FXD, 12.5KHz for data and voice: 7K60FXE |
| Modulation Distortion | <5% |
| Signal-to-noise (wide/narrow) | ≥45dB@25KHz, ≥40dB@12.5KHz |
| Adjacent Channel power | ≤-65dB/≤-60dB |
| Audio Response | +1 ~ -3dB |
| Antenna Port Spurious | 9KHz-1GHz: ≤-36dBm, 1GHz-12.75GHz: ≤-30dBm |
| Digital Protocol | ETSI-TS102 361-1,-2,-3 |
| Vocoder Type | AMBE+2 TM |
| Analog Receive Sensitivity | -122dBm (12dB SINAD) |
| Digital Receive Sensitivity | -120dBm (BER≤5%) |
| Audio Power | 1W |
| Audio Distortion | <10% |
| Audio Response | +1 ~ -3dB |
| Signal Imitation | ≥70dB |
| Intermediation (Wide/narrow) | ≥62dB/≥58dB |
| Adjacent Channel Selectivity (Wide/narrow) | ≥65dB/≥60dB |
| Receive Current | ≤380mA |
| PM Noise | ≥45dB@25KHz / ≥40dB @12.5KHz |
Note: All specifications are subject to change without prior notice or liability.
8. Warranty and Support
We promise to carefully 100% inspect quality, specification and quantity of the items before delivery.
We offer ONE YEAR WARRANTY for the radio body, THREE MONTHS for the battery, charger and other accessories.
Shipping cost for warranty repair / exchange / return have to be paid by buyer.
Please kindly contact us before sending us any parcel, correct shipping address will be provided.
For further assistance or technical support, please contact your local distributor.
A detailed user manual in PDF format is available for download: User Manual (PDF)
9. User Tips
- Always ensure your battery is fully charged before extended use to avoid interruptions.
- Familiarize yourself with the programmable side keys (SK1, SK2) to quickly access frequently used functions like power adjustment or screen switching.
- When using the SMS function, remember the 250-character limit and utilize shortcut messages for common phrases.
- For clear communication, especially in noisy environments, adjust the VOX gain level carefully.
- Regularly clean the radio's contacts and surface to maintain optimal performance and extend its lifespan.