SAGE LU MEI GL-RC-006Z

Contents

GLEDOPTO 2.4G 6 Zone Group RGBCCT RF Remote Control User Manual

Model: GL-RC-006Z | Brand: SAGE LU MEI

1. Introduction

The GLEDOPTO GL-RC-006Z is a versatile 2.4G RF remote control designed for smart home lighting systems. It allows users to control RGBCCT (Red, Green, Blue, Cool White, Warm White) LED lights, offering a wide range of color, brightness, and color temperature adjustments across up to six independent zones. This remote operates on a 2.4G RF signal and is compatible with GLEDOPTO Plus/Pro Version products, but it is NOT a Zigbee device.

2. Features

  • 2.4G RF Wireless Control: Direct control of lights without the need for a gateway.
  • 6-Zone Group Management: Control lights in multiple rooms by grouping them into up to six independent zones.
  • 16 Million Colors: Access to a vast spectrum of colors for personalized lighting.
  • CCT Adjustable: Adjust color temperature from warm white to cool white.
  • Brightness Controllable: Dim or brighten lights to your desired level.
  • 9 Lighting Modes: Pre-programmed dynamic modes for various scenes and moods.
  • 60s Off Delay: Conveniently turn off lights after a 60-second delay.
  • Intuitive Interface: Easy-to-use color ring, CCT slider, and dedicated buttons for various functions.
  • Durable Material: Constructed from PC for reliability.
GLEDOPTO 2.4G 6 Zone Group RGBCCT RF Remote with multiple functions highlighted

Figure 1: Multiple functions of the GLEDOPTO 2.4G 6 Zone Group RGBCCT RF Remote.

3. Specifications

AttributeValue
Model NumberGL-RC-006Z
Product Name2.4G RF Remote Control
MaterialPC
Product Size133*55*18mm
Power SourceDRY BATTERY (2*AAA Battery)
Input Voltage3V
Standby Power15uA
Transmitting Power6dBm
Modulation MethodGFSK
Programs9 modes
Control Distance30m
Radio Frequency2400-2483.5MHz
Working Temperature-20~60 °C
CertificationCE, EMC, LVD, ROHS
Applicable LightsPro Controller/LED Bulb/Spotlight/Downlight
Product parameters diagram showing dimensions and specifications

Figure 2: Detailed product parameters and dimensions.

4. Setup

4.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Open the compartment cover.
  3. Insert two AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.

4.2 Pairing with Lights (Binding)

This remote control operates on 2.4G RF and is designed to work with GLEDOPTO Plus/Pro Version products. It is NOT a Zigbee device and cannot be paired with Zigbee hubs directly.

To pair the remote with a compatible GLEDOPTO light:

  1. Ensure the GLEDOPTO light (e.g., LED bulb, controller) is powered off.
  2. Power on the light.
  3. Within 3 seconds of powering on the light, press the 'Master ON' button (labeled 'I') on the remote control three times.
  4. The light should flash to indicate successful pairing.

If pairing is unsuccessful, ensure the light is a GLEDOPTO Plus/Pro Version product and repeat the steps. You can also try resetting the light if necessary (refer to the light's specific manual for reset procedures).

Image showing the remote controlling lights directly without a gateway using 2.4G RF

Figure 3: The 2.4G RF Remote Control allows direct control without a gateway.

5. Operating Instructions

The GL-RC-006Z remote control features an intuitive layout for easy operation of your GLEDOPTO lights.

Remote control with labeled buttons and functions

Figure 4: GLEDOPTO Remote Control button layout and functions.

5.1 Basic Controls

  • Master ON (I): Turns all paired lights ON.
  • Master OFF (O): Turns all paired lights OFF.
  • Color Ring: Touch the color ring to select any of 16 million colors.
  • CCT Slider: Adjusts the color temperature from warm white to cool white.
  • Brightness +/-: Increases or decreases the brightness level.

5.2 Zone Control

The remote supports up to 6 independent zones. Use the '01' to '06' buttons to select a specific zone. Once a zone is selected, any color, CCT, or brightness adjustments will only apply to the lights linked to that zone.

  • Zone ON (e.g., 01): Turns on lights in the selected zone.
  • Zone OFF (e.g., 1): Turns off lights in the selected zone.
  • Linking/Unlinking Lights: To link a light to a specific zone, power on the light, then within 3 seconds, press the corresponding zone's 'ON' button (e.g., '01') three times. To unlink, power on the light, then within 3 seconds, press the corresponding zone's 'OFF' button (e.g., '1') five times.
Group management illustration showing the remote controlling lights in six different rooms

Figure 5: Group management allows controlling lights in up to six different rooms.

5.3 Dynamic Modes

  • Modes (M): Press the 'M' button to cycle through 9 pre-programmed dynamic lighting modes.
  • Speed +/- (S+/S-): While in a dynamic mode, use 'S+' to increase the speed of the effect and 'S-' to decrease it.
Illustration of 9 lighting modes for different scenes

Figure 6: The remote offers 9 lighting modes for various scenes.

5.4 60s Off Delay

  • 60s Off Delay (Moon button): Press the moon button to activate a 60-second delay before the lights turn off automatically. This is useful for leaving a room without immediately plunging it into darkness.
Image illustrating the 60s off delay function activated by the moon button

Figure 7: Activate the 60s off delay with the moon button.

5.5 Video Demonstration

Video 1: Demonstration of color, color temperature, brightness, and mode adjustments using the remote control.

6. Controllable Products & Usage Scenarios

6.1 Controllable Products

This remote control is compatible with various GLEDOPTO Plus/Pro Series LED lighting products, including:

  • LED Controllers
  • LED Bulbs
  • LED Spotlights
  • LED Downlights
  • LED Floodlights
  • LED Garden Lamps
Image showing the remote controlling various LED products like controllers, bulbs, spotlights, and downlights

Figure 8: Examples of GLEDOPTO products controllable by this remote.

6.2 Usage Scenarios

The 6-zone control feature makes this remote ideal for managing lighting in different areas of your home or office:

  • Living Room
  • Bedroom
  • Kitchen
  • Dining Room
  • Study
  • Corridor
  • Porch
  • Toilet
Group management illustration showing the remote controlling lights in six different rooms

Figure 9: Example usage scenarios for the 6-zone remote control.

7. Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: Replace AAA batteries when the remote's performance degrades or it stops responding. Always use new batteries and dispose of old ones responsibly.
  • Storage: Store the remote in a dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

  • Remote not responding: Check battery levels and replace if necessary. Ensure the remote is within the 30m control distance of the lights.
  • Lights not pairing: Confirm that the light is a GLEDOPTO Plus/Pro Version product. Ensure the pairing steps (power cycle light, press 'Master ON' three times within 3 seconds) are followed precisely. Try resetting the light if issues persist.
  • Interference: While 2.4G RF is robust, strong interference from other 2.4GHz devices might occasionally affect performance. Try to minimize such interference.

9. User Tips

  • Pairing Note: Some users have found that the pairing instructions in the included manual might differ from the effective method. If you encounter issues, try the method described in Section 4.2: power cycle the light, then press the 'Master ON' button three times within 3 seconds.
  • Zone Management: Utilize the 6-zone feature to organize your lighting by room or function for easier control.
  • Dynamic Modes: Experiment with the 9 lighting modes and speed adjustments to create different atmospheres for parties or relaxation.

10. Warranty & Support

GLEDOPTO products typically come with a warranty:

  • Indoor Products: 2 years warranty
  • Outdoor Products: 3 years warranty

For specific warranty details, technical support, or any issues with your product, please refer to the official GLEDOPTO website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.

Warranty & Service information

Figure 10: GLEDOPTO Warranty & Service details.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.