ANGDUO Extendable Round Dining Table User Manual

1. Introduction

Thank you for choosing the ANGDUO Extendable Round Dining Table. This manual provides essential information for the safe assembly, operation, maintenance, and care of your new dining table. Please read these instructions thoroughly before use and retain them for future reference.

Figure 1: Extendable Round Dining Table in extended configuration.

2. Safety Information

• Always assemble the table on a soft, clean surface to prevent scratches.
• Ensure all screws and bolts are securely tightened before use.
• Do not stand or sit on the table.
• Keep small parts away from children during assembly.
• Avoid placing excessively hot or cold items directly on the tabletop without protection.

3. Setup and Assembly

The ANGDUO Extendable Round Dining Table requires assembly. All necessary hardware and clear assembly instructions are included in the packaging. Please follow the step-by-step guide provided with your product for straightforward building.

3.1 Unpacking

1. Carefully open the packaging and remove all components.
2. Check the parts list against the included hardware to ensure all pieces are present.
3. Lay out all parts on a clean, soft surface (e.g., a blanket or carpet) to prevent damage during assembly.

3.2 Assembly Steps

Refer to the detailed assembly instructions provided in your product package. Typically, assembly involves:

1. Attaching the base components.
2. Securing the tabletop to the base.
3. Installing any internal storage shelves or sliding door mechanisms.
4. Ensuring all connections are firm and stable.

If you encounter any difficulties during assembly, please contact customer support.

4. Operating Instructions

4.1 Extending the Tabletop

The table features an ingenious slide-and-lock mechanism to transform from a compact round table (43.3 inches) to a spacious oval table (59 inches), accommodating 4 to 8 diners.

1. Gently pull the two halves of the tabletop apart. The smooth, silent glides will allow them to separate easily.
2. Locate the removable leaves stored neatly underneath the tabletop.
3. Insert the leaves into the gap created by separating the tabletop halves. Ensure they are properly aligned and seated.
4. Push the tabletop halves back together until they meet the inserted leaves and the slide-and-lock mechanism engages, securing the extended table.

4.2 Retracting the Tabletop

1. Disengage the slide-and-lock mechanism (if applicable, some designs may simply require pulling apart).
2. Gently pull the tabletop halves apart to create a gap.
3. Remove the leaves and store them in their designated compartment underneath the table.
4. Push the two halves of the tabletop together until they meet and the mechanism locks them in the compact round position.

Figure 2: Retractable tabletop mechanism and dimensions.

4.3 Using the Integrated Storage

The table base features sliding doors that reveal a roomy 2-tier cabinet for convenient storage.

1. To access the storage, gently slide the fluted wood door to one side.
2. Organize dishes, condiments, or other kitchen essentials on the two tiers.
3. To close, slide the door back into its original position until it covers the storage compartment.

Figure 3: Integrated storage compartment (open and closed).

5. Maintenance and Care

To ensure the longevity and appearance of your dining table, follow these care instructions:

• Cleaning: Simply wipe the surface clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Spills: Wipe up spills immediately to prevent staining, especially on the wood-grain texture.
• Protection: Use coasters, placemats, or tablecloths to protect the tabletop from heat, moisture, and scratches.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Stability: Periodically check and tighten all screws and bolts to maintain the table's stability.

6. Troubleshooting

If you encounter any issues with your dining table, refer to the following common solutions:

• Table Wobbles: Check that all leg and base connections are securely tightened. Ensure the table is on a level surface. Adjust any leveling feet if present.
• Tabletop Difficult to Extend/Retract: Ensure the glides are clean and free of debris. Apply a small amount of silicone-based lubricant to the glides if they feel stiff. Do not force the mechanism.
• Sliding Door Sticks: Check for any obstructions in the door track. Clean the track and apply a small amount of furniture wax or silicone spray if needed.
• Missing Parts or Defects: If you find any missing pieces or defects upon unpacking, please contact the seller's after-sales team immediately for assistance.

7. Specifications

Note: Dimensions are approximate and may vary slightly.

8. User Tips

• Maximize Space: Utilize the compact round configuration for daily meals and extend to the oval shape only when hosting larger gatherings to save space.
• Organize Smart: Use the integrated storage for items frequently used at the dining table, such as placemats, napkins, or small serving dishes, to keep your tabletop clutter-free.
• Regular Checks: Periodically inspect the table for any loose screws or connections, especially after moving it or extending/retracting the top frequently.
• Surface Protection: Always use protective pads under hot dishes and avoid dragging rough objects across the surface to prevent scratches.

9. Warranty and Support

This product is designed for durability and functionality. In the unlikely event of a manufacturing defect or if you require assistance with any aspect of your table, please contact the seller's customer service or after-sales team directly. They are equipped to provide professional support and resolve any issues you may encounter.

Please retain your proof of purchase for warranty claims.