GODIAG GT100 PLUS GPT

Contents

GODIAG GT100 PLUS GPT ENET DOIP Break Out Box ECU Connector User Manual

Model: GT100 PLUS GPT

Brand: GODIAG

1. Introduction

The GODIAG GT100 PLUS GPT is a versatile testing platform designed for OBDII protocol communication detection, ECU maintenance, diagnosis, programming, and coding. It features a voltage and current display, allowing maintenance engineers to conveniently monitor the real-time working status of the ECU.

This device converts the car's OBD2 interface into a 16-pin breakout box for signal detection. It can connect to single or multiple vehicle modules and is compatible with various diagnostic tools to verify communication integrity. Key functionalities include 24V to 12V voltage conversion, DOIP-ENET communication, and GPT (Generic Protocol Tester) for reading and writing ECU data. Additionally, it can supply stable power to the vehicle during battery changes, preventing data loss, automatic locking, key remote control failures, and fault light activation.

The GT100 PLUS GPT utilizes CANH and CANL shielded twisted cables to resist electromagnetic interference, ensuring more stable communication.

2. Safety Warnings

  • CHOKING HAZARD: Contains small parts. Not suitable for children under 3 years.
  • Always ensure proper electrical connections before powering on the device to prevent damage to the ECU or the tool itself.
  • Do not attempt to disassemble or modify the device. Refer all servicing to qualified personnel.
  • Avoid exposing the device to moisture, extreme temperatures, or strong impacts.
  • Always wear appropriate personal protective equipment (PPE) when working with vehicle electronics.

3. Package Contents

Verify that all items listed below are included in your package:

  • 1 x GODIAG GT100 PLUS GPT Host
  • 1 x GPT Connecting Cable
  • 1 x Ethernet Cable
  • 1 x OBD 2-in-1 Extension Cable
  • 1 x Colored Jumper Cable Set
  • 1 x 12V Power Supply
  • 1 x 120 Ohm Resistance
  • 6 x Banana Plugs
  • 24 x Wire Accessories (Dupont 2.54mm connector female pins)
  • 1 x User Manual (this document)
Image showing all components included in the GODIAG GT100 PLUS GPT package.
Figure 1: Complete package contents of the GODIAG GT100 PLUS GPT.

4. Product Overview

The GODIAG GT100 PLUS GPT is a compact and robust device designed for automotive diagnostic and programming tasks. It features a clear layout with various connection points and indicators.

Close-up image of the GODIAG GT100 PLUS GPT device, showing its ports, switches, and digital display.
Figure 2: Front view of the GODIAG GT100 PLUS GPT unit.

4.1 Key Components

  • ECU Connector Pins (9-16): Labeled pins for connecting to various ECU signals (TAC, SDM, TS, TC, CANL, WSPE, BAT+).
  • Tool Connector Pins (1-8): Labeled pins for connecting to diagnostic tools (VPW+, CHAS GND, SIG GND, CANH, SIL).
  • Digital Display: Shows real-time voltage (V) and current (A) readings.
  • DC (12V) Input: For external power supply.
  • Power Switch: Turns the main power of the device on/off.
  • 12V(30) & 12V(15) Switches: Control power output for specific functions, often used for maintaining vehicle power during battery changes.
  • Auto/Off/Man Switch: Selects automatic or manual control for certain operations.
  • GPT Port: For Generic Protocol Tester connections.
  • DB25 Port: For connecting to ECU programming tools.

5. Setup and Connections

Before connecting the device, ensure the vehicle's ignition is off and all safety precautions are observed. Always double-check your wiring against the vehicle's specific diagrams.

5.1 General Connection Principles

  1. Connect the provided 12V power supply to the DC (12V) input port on the GT100 PLUS GPT.
  2. Connect the GT100 PLUS GPT to the vehicle's OBD2 port using the OBD 2-in-1 extension cable.
  3. Connect your diagnostic tool or programming device to the appropriate port on the GT100 PLUS GPT or directly to the vehicle/ECU as specified for the task.

5.2 OBDII Protocol Communication Detection

This setup allows you to monitor OBDII communication signals and verify connectivity with a diagnostic tool.

Diagram showing the GODIAG GT100 PLUS GPT connected to a car's OBD2 port and a laptop running diagnostic software.
Figure 3: OBDII communication detection setup.
  1. Connect the OBD 2-in-1 extension cable to the vehicle's OBD2 port.
  2. Connect the other end of the OBD 2-in-1 extension cable to the GT100 PLUS GPT.
  3. Connect your diagnostic tool to the GT100 PLUS GPT's OBD2 port.
  4. Power on the GT100 PLUS GPT and the diagnostic tool. Observe the LED indicators on the GT100 PLUS GPT for communication status.

5.3 ECU Connection for Maintenance/Programming

For direct ECU work, such as programming or bench testing, use the GPT connecting cable and colored jumper cables.

Diagram illustrating the GODIAG GT100 PLUS GPT connected to an ECU and a laptop for programming or diagnosis.
Figure 4: ECU connection setup for maintenance or programming.
  1. Identify the correct pins on the ECU for power, ground, and communication lines (e.g., CANH, CANL, K-line). Refer to the ECU's specific wiring diagram.
  2. Use the colored jumper cables to connect the ECU's pins to the corresponding labeled ports on the GT100 PLUS GPT (e.g., BAT+, GND, CANH, CANL).
  3. Connect the GPT connecting cable from the GT100 PLUS GPT to your programming tool or laptop.
  4. Ensure the 12V power supply is connected to the GT100 PLUS GPT.

5.4 DOIP-ENET Communication

The GT100 PLUS GPT supports DOIP-ENET communication. Important: When using the ENET function, users cannot connect to the GT100 PLUS GPT host. The ENET connection is direct.

Diagram showing a direct DOIP ENET connection from a car's OBD2 port to a laptop, bypassing the GT100 PLUS GPT.
Figure 5: DOIP ENET direct connection setup.
  1. Connect the Ethernet cable to the vehicle's OBD2 port (if it supports ENET).
  2. Connect the other end of the Ethernet cable to your laptop or diagnostic device.
  3. Proceed with your DOIP-ENET diagnostic or programming tasks using the appropriate software on your laptop.

5.5 24V to 12V Voltage Conversion (for Heavy Duty Trucks)

This feature allows the GT100 PLUS GPT to be used with 24V heavy-duty trucks, converting the voltage to 12V for compatible diagnostic tools.

Diagram showing the GODIAG GT100 PLUS GPT connected to a 24V truck's OBD2 port and a 12V diagnostic tablet, illustrating voltage conversion.
Figure 6: 24V to 12V conversion setup for heavy-duty trucks.
  1. Connect the OBD 2-in-1 extension cable to the 24V truck's OBD2 port.
  2. Connect the other end of the OBD 2-in-1 extension cable to the GT100 PLUS GPT.
  3. Connect your 12V diagnostic tool to the GT100 PLUS GPT's OBD2 port. The device will automatically convert the 24V input to 12V output for the diagnostic tool.

6. Operating Instructions

6.1 Powering On/Off

Use the main POWER switch on the GT100 PLUS GPT to turn the device on or off. Ensure all connections are secure before powering on.

6.2 Voltage and Current Display

The digital display on the GT100 PLUS GPT shows the real-time voltage (V) and current (A) of the connected ECU. This allows for immediate assessment of the ECU's power status and helps in diagnosing potential issues during programming or testing.

6.3 Signal Detection and LED Indicators

Each pin on the ECU Connector and Tool Connector has an associated LED indicator. These LEDs illuminate to show the communication status of each signal line. By observing these indicators, you can quickly identify if a specific signal is active or if there's a communication problem on a particular line.

6.4 Power Supply Function for Battery Changes

When changing a vehicle's battery, use the GT100 PLUS GPT to maintain power to the vehicle's control modules. This prevents loss of data, automatic locking of systems, key remote control failures, and activation of fault lights.

  1. Connect the GT100 PLUS GPT to the vehicle's OBD2 port.
  2. Connect the 12V power supply to the GT100 PLUS GPT.
  3. Turn on the POWER switch and activate the 12V(30) or 12V(15) switch as required to provide stable power.
  4. Proceed with battery replacement. The GT100 PLUS GPT will ensure continuous power to the vehicle's systems.

6.5 Auto/Off/Man Switch

This switch controls the power delivery mode. In 'Auto' mode, the device may automatically manage power based on detected conditions. In 'Man' (Manual) mode, you have direct control over power delivery via the 12V(30) and 12V(15) switches. 'Off' disables this function.

Video 1: Product demonstration showing various connection setups and features of the GODIAG GT100 PLUS GPT.

7. Maintenance

  • Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Store the GT100 PLUS GPT in a cool, dry place away from direct sunlight and corrosive materials.
  • Avoid dropping the device or subjecting it to strong vibrations or impacts.
  • Regularly inspect cables and connectors for any signs of wear or damage. Replace damaged components immediately.

8. Troubleshooting

8.1 No Power to the Device

  • Check if the 12V power supply is securely connected to the GT100 PLUS GPT.
  • Ensure the power adapter is plugged into a working electrical outlet.
  • Verify that the main POWER switch on the device is in the 'ON' position.

8.2 No Communication with Vehicle/ECU

  • Ensure all cables (OBD2, GPT, jumper cables) are securely connected to their respective ports on the GT100 PLUS GPT, vehicle, or ECU.
  • Verify that the correct pins are connected when working directly with an ECU. Refer to the vehicle's specific wiring diagrams.
  • Check the LED indicators on the GT100 PLUS GPT. If no LEDs are active for communication lines, there might be a wiring issue or a problem with the vehicle's communication bus.
  • Test the vehicle's OBD2 port with another known-good diagnostic tool to rule out vehicle-side issues.

8.3 Incorrect Voltage/Current Readings

  • Ensure the 12V power supply to the GT100 PLUS GPT is stable.
  • Check for any short circuits or incorrect wiring that could affect readings.
  • If readings are consistently abnormal, contact technical support.

8.4 DOIP-ENET Function Not Working

  • Remember that for DOIP-ENET communication, the ENET cable should be connected directly from the car's OBD2 port to your laptop. The GT100 PLUS GPT host should NOT be connected in this scenario.
  • Verify the Ethernet cable is functional and securely connected.
  • Ensure your laptop's network settings are correctly configured for ENET communication.

9. Specifications

AttributeValue
Model NameGT100 PLUS GPT
Brand NameGODIAG
Item TypeOther
Item Weight2kg
Item Height7.2cm
Item Width18.3cm
Item Length23.3cm
External Testing CertificationCE
ElectronicNo
Wireless SupportNo
Is Batteries IncludedNo
UseNot Telecommunication
High-concerned chemicalnone
OriginMainland China

10. User Tips

  • Power Compatibility: If you are in a region with 220V electrical outlets, ensure you use a compatible 12V power adapter or a step-down transformer if necessary, as the included power supply is typically 110V.
  • Verify ECU Pinouts: Always consult the specific wiring diagrams for the ECU you are working with to ensure correct pin connections, especially when using jumper cables for direct ECU access. Incorrect connections can damage the ECU or the GT100 PLUS GPT.
  • Stable Power for Programming: When performing ECU programming, always utilize the GT100 PLUS GPT's power supply function to provide stable voltage. Fluctuations can corrupt ECU data.
  • Observe LED Indicators: Pay close attention to the LED indicators for each pin. They provide valuable visual feedback on signal activity and can help quickly diagnose communication issues.

11. Frequently Asked Questions (FAQ)

Q: What is the primary function of the GODIAG GT100 PLUS GPT?

A: It's a testing platform for OBDII protocol communication detection, ECU maintenance, diagnosis, programming, and coding.

Q: Can I use this device to power my car during a battery change?

A: Yes, it can supply power to the car to prevent data loss, automatic locking, key remote control failure, and fault lights turning on during battery replacement.

Q: Does it support 24V vehicles?

A: Yes, it supports 24V to 12V voltage conversion, making it compatible with heavy-duty trucks.

Q: How do I use the DOIP-ENET function?

A: For DOIP-ENET communication, connect the ENET cable directly to the car's OBD2 port and your laptop. Do NOT connect the GT100 PLUS GPT host when using this function.

Q: What are the colored LEDs for?

A: The LEDs indicate the communication status of each pin, helping you diagnose signal issues.

12. Warranty and Support

For detailed warranty information, please refer to the official user manual PDF available at: GODIAG GT100 PLUS GPT User Manual (PDF).

If you encounter any issues or require technical assistance, please contact the manufacturer or your authorized reseller for support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.