1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the JIKONG JK Smart BMS Active Balancer. This advanced Battery Management System (BMS) is designed for household energy battery systems, offering active balancing, comprehensive protection, and smart monitoring capabilities. It is suitable for various battery types including LiFePO4, Ternary Lithium, and Lithium Titanate.
Image 1.1: JIKONG JK Smart BMS with 4.3 Inch LCD Display and Interface Board.
2. Key Features
- Active Balance: Real-time active energy transfer equalization using a supercapacitor medium, ensuring good durability, long life, and stable performance.
- High Precision: Single voltage range 1V~5V, equalization accuracy ±5mV.
- High Balance Current: Achieves 2-10A continuous balanced current to maintain battery consistency, improve cruising range, and delay aging.
- Smart Monitoring: Mobile phone Bluetooth communication with dedicated Android (JK BMS) and iOS (JIKONG BMS) apps for real-time battery status viewing.
- Scalability: Supports balanced cascading for systems with more than 24 battery packs.
- Wide Compatibility: Suitable for Li-ion, LiFePO4, and LTO battery types.
- Multiple Protections: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection.
- Communication Ports: Equipped with RS485, RS232, and CAN communication ports for PC monitoring and parallel use.
- Optional Heating Function: Reserved for specific applications.
- Buzzer Alarm: Integrated buzzer for alarm notifications.
- Parallel Connection Support: Features an integrated 10A current limiting module for parallel battery pack configurations.
Image 2.1: Overview of BMS safety features including battery info, alarm, clock, communication, data recording, current limiting, heating, and low-voltage switch.
Image 2.2: Internal components of the BMS, highlighting cooling aluminum alloy, flexible wiring terminals, high-performance MCU, low internal resistance MOS, sampling line, interface board, and chip indicator light.
3. Package Contents
Please check the package for the following items:
- 1 x JIKONG JK Smart BMS
- 1 x Interface Board
- 1 x B+ Cable
- 4 x Screws
- 3 x Adapter Cables (various types)
- 1 x Trunk Interface
- 1 x RJ45 Cable
- 2 x Sampling Cables
- 1 x Heating Adapter Cable (if applicable)
Image 3.1: JIKONG JK Smart BMS package contents.
4. Specifications
The following table outlines the technical specifications for the JIKONG JK Smart BMS models:
Image 4.1: Detailed Product Specifications for JIKONG JK BMS models.
| Attribute | Value |
|---|---|
| Brand Name | seplosBMS (JIKONG) |
| Model | JK 200A PB2A16S20P V19 |
| Usage Scenario | Energy Storage BMS |
| Charging Current | 200A |
| Balance Function | Active Balanced BMS (2A) |
| Handware or Smart | SMART BMS |
| Charge and Discharge Port | Common Port BMS |
| Type | LIFEPO4 Battery BMS (Compatible with Li-ion, LTO) |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| Certification | CE, FCC, RoHS |
| Display Interface | Yes (4.3 Inch LCD) |
| Other Interfaces | RS232/RS485/CAN |
| Bluetooth Function | Supports Android, Apple, Harmony |
| Parallel Charging Current Limiting | 10A |
| Battery Temperature Probes | 4+ (4 channel cells + 1 channel MOS) |
Image 4.2: Dimensional drawing of the BMS board.
5. Installation and Wiring
Follow these steps carefully for proper installation and wiring of your JIKONG JK Smart BMS:
- Connect all the cables: Ensure all necessary cables (sampling cables, B+, B-, P-lines) are prepared.
- Insert the cable into the BMS: Connect the battery sampling line connector to the BMS. There are strict sequence requirements for power-on: First, weld B-, P-, B+, P+, and then sequentially plug in the battery sampling line connector from low to high.
- Connect the B+ line, B- line, and P- line to the battery: Ensure these main power lines are securely connected to your battery pack.
- Activate the BMS: After power-on, press the key on the BMS to activate it.
- Connect Load/Charger: The load or charger can only be added after all connecting wires are installed and the BMS is activated.
Important Removal Procedure: When removing the BMS or disconnecting the battery, unplug the charger or load first. Then, remove the battery sampling line connector in sequence from high to low, and finally remove B+, P+, B-, P-.
Image 5.1: Wiring diagram for the JIKONG JK Smart BMS. This diagram illustrates connections for the battery pack (sampling cable, B+, B-), inverter, municipal electricity, and the optional display unit.
The BMS is designed for home energy storage systems and is also suitable for communication base stations, building energy storage, and industrial equipment backup power.
Image 5.2: Application scenarios for the JIKONG JK Smart BMS.
6. Operation
6.1. Display Unit (4.3 Inch LCD)
The optional 4.3-inch LCD display provides real-time monitoring of individual cell voltages and overall battery status.
Image 6.1: JIKONG 4.3 Inch LCD Display.
6.2. Mobile App Monitoring
The JIKONG BMS supports Bluetooth communication with a mobile application, allowing you to view battery status in real-time. The app is available for both Android and iOS operating systems.
- iOS: Search for "JIKONG BMS" in the Apple App Store.
- Android: Search for "JK BMS" in the Google Play Store.
6.3. PC Monitoring (RS485/CAN Serial Port)
The BMS features RS485 and CAN serial ports for advanced PC monitoring. This allows for detailed data logging, parameter configuration, and system diagnostics.
- Supports parallel connection.
- Standard charging current limiting module.
- Reserved heating function.
- Equipped with a buzzer alarm function for immediate alerts.
- Intelligent active balancing ensures energy transfer without consumption.
- Reserved positioning holes for easy fixing.
Image 6.2: RS485 CAN serial port features for PC monitoring.
6.4. Communicable Inverter Compatibility
The JIKONG BMS is widely compatible with various inverter brands, facilitating seamless integration into existing energy systems.
Image 6.3: Compatible inverter brands.
7. Maintenance
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion.
- Software Updates: Keep the mobile app and PC software updated to the latest versions for optimal performance and new features.
- Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges to prevent damage.
- Cleaning: Keep the BMS unit clean and free from dust and debris. Use a dry, soft cloth for cleaning.
8. Troubleshooting
This section provides solutions to common issues you might encounter with your JIKONG JK Smart BMS.
| Problem | Possible Cause | Solution |
|---|---|---|
| BMS not powering on | Incorrect wiring, loose connections, BMS not activated. | Verify all B+, B-, P- connections. Ensure sampling cables are plugged in correctly (low to high). Press the activation key on the BMS. |
| Inaccurate voltage readings | Faulty sampling cable, poor connection, cell imbalance. | Check sampling cable connections. Allow BMS to balance cells. If issue persists, inspect cables for damage. |
| Bluetooth connection issues | App not installed, Bluetooth disabled, interference. | Ensure the correct JIKONG BMS app is installed. Verify Bluetooth is enabled on your device. Move closer to the BMS. |
| Overcharge/Over-discharge protection triggered | Battery voltage outside safe limits. | Check charger/load settings. Allow BMS to balance. Ensure battery pack is within operational voltage range. |
9. User Tips
- For optimal performance, ensure your battery pack is assembled with cells of similar internal resistance and capacity.
- When setting up a parallel system, utilize the BMS's parallel connection support and current limiting module for enhanced safety and efficiency.
- Regularly monitor cell voltages via the mobile app or LCD display to catch potential imbalances early.
- If you require CAN communication functionality, please contact JIKONG support for customization options.
10. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact your vendor or JIKONG customer support. Ensure you have your product model and purchase details ready when contacting support.
The product is certified with CE, FCC, and RoHS, indicating compliance with relevant safety and environmental standards.