1. Introduction
This manual provides detailed instructions for the Scimagic-RC replacement remote control, compatible with various NOVOFERM NOVOTRON garage gate and door openers. This remote control serves as a perfect replacement for lost or damaged original units and is designed for easy programming and reliable operation.
Figure 1: Scimagic-RC NOVOFERM NOVOTRON Compatible Remote Control
2. Compatibility
This remote control is 100% compatible with the following NOVOFERM models:
- NOVOFERM MCHS43-2
- NOVOFERM MTR43-2
- NOVOFERM MNHS433-02
- NOVOFERM MNHS433-04
- NOVOFERM NOVOTRON 502 MAX43-2
- NOVOFERM NOVOTRON 504 MAX43-4
- NOVOFERM NOVOTRON 512 MIX 43-2
- NOVOFERM MINI-NOVOTRON 522
- NOVOFERM MINI-NOVOTRON 524
- NOVOFERM MINI-NOVOTRON 522 Design
- NOVOFERM MINI-NOVOTRON 524 Design
Important Note:
This remote control is NOT compatible with AES code 128-bit systems. Please ensure your original remote or receiver does not use AES 128-bit encryption before purchase.
Figure 2: Incompatibility with AES 128-bit systems
Figure 3: Visual guide to compatible NOVOFERM remote models
3. Specifications
| Feature | Description |
|---|---|
| Item Condition | New, Third-party replacement |
| Brand Name | Scimagic-RC |
| Model Number | 0141 |
| Encoding Method | Rolling Code |
| Frequency | 433.92 MHz |
| Operating Voltage | CR2032 (Battery included) |
| Buttons | 2 or 4 (depending on style) |
| Transmit Distance | 25-50m in open space (up to 150m in ideal conditions) |
| Application | Garage doors, Alarms, Automatic doors, Rolling doors, etc. |
| Certification | CE |
Figure 4: Remote control dimensions and key specifications
Figure 5: Examples of applications for the remote control
4. Package Contents
Upon opening your package, you should find the following items:
- 1 x Scimagic-RC Remote Control
- 1 x CR2032 Battery (pre-installed or included separately)
- 1 x Keychain
- 1 x English Instruction Manual
Figure 6: Package contents
5. Setup and Programming
To program your new remote control, you will need access to your receiver/opener unit. The receiver is typically located near your garage door motor or gate control box.
Programming Steps:
Locate and Open Receiver Casing: Open the casing of your receiver unit. This unit is usually found next to your motor.
Figure 7: Opening the receiver casing
Press Programming Button: On the receiver circuit board, locate and press the programming button. This button may be labeled "ENR", "MEMO", "PROG", or "REC" depending on your specific model. Release the button immediately after pressing. The LED light on the receiver will illuminate or blink, indicating it is in programming mode.
Figure 8: Pressing the programming button
Activate New Remote: Press a button on your new Scimagic-RC remote control for approximately 1 second.
Figure 9: Activating the new remote
Confirm Programming: Release the button on your new remote. The LED light on the receiver should turn off immediately or within 10 seconds, depending on the model. This indicates successful programming.
Figure 10: Programming confirmation
Your new remote control is now programmed and ready for use.
Visual Programming Guide:
Video 1: Step-by-step demonstration of the remote control programming process.
6. Operation
Once programmed, simply press the corresponding button on your remote control to operate your garage door, gate, or other compatible device. The remote transmits a rolling code signal to ensure security.
Figure 11: Operating a gate with the remote control
7. Maintenance
Battery Replacement:
The remote control uses a CR2032 coin cell battery. If the remote's range decreases significantly or the indicator light does not illuminate when a button is pressed, it may be time to replace the battery. To replace:
- Carefully open the remote control casing.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Close the remote control casing securely.
General Care:
- Keep the remote control dry and away from extreme temperatures.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Clean the remote with a soft, dry cloth if necessary. Do not use harsh chemicals.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working after programming | Incorrect programming steps, battery low/dead, remote not compatible. |
|
| Reduced operating range | Low battery, environmental interference, obstructions. |
|
| Remote indicator light not illuminating | Dead battery, faulty remote. |
|
9. User Tips
- Optimal Range: For best performance, try to maintain a clear line of sight between the remote and your receiver. Obstructions like walls or vehicles can reduce the effective operating distance.
- Backup Remote: Consider purchasing an additional remote as a backup in case your primary remote is lost or damaged.
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase. For any issues or support inquiries, please contact the seller directly. You can typically find seller contact information on your purchase receipt or order details page.
The seller, Scimagic-RC SMG918 Store, has a positive feedback rate of 95.0% and a store rating of 4.9, indicating reliable service.
