1. Safety Instructions
Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts.
- Personal Safety: Always wear eye protection. Use dust masks, non-skid safety shoes, hard hats, or hearing protection for appropriate conditions. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
2. Product Overview
The Ronix 6404 is a portable 230W electric orbital sander designed for woodworking and general sanding tasks. It features a robust motor, an anti-dust switch, and a secure clamping system for sanding paper.

Figure 1: Ronix 6404 Electric Sander with key features and specifications.
Key Components:
- Lock Anti-Dust On/Off Switch: Designed to prevent dust ingress, prolonging switch life.
- Clamping System: Securely holds sanding paper in place.
- Aluminum Low-Vibration Base Plate: Provides stability and reduces user fatigue during operation.
- Power Cord: For connecting to a standard electrical outlet.
3. Setup
3.1 Attaching Sanding Paper
- Ensure the sander is unplugged from the power source.
- The Ronix 6404 uses a Hook and Loop abrasive attachment system. Align the sanding sheet with the base plate, ensuring any dust holes on the paper match those on the plate for efficient dust collection.
- Press the sanding sheet firmly onto the base plate to ensure a secure attachment.

Figure 2: Detail of the clamping system for securing sanding paper.
3.2 Power Connection
- Verify that the power supply matches the sander's rated voltage (220-240V).
- Plug the sander's power cord into a suitable electrical outlet.
4. Operating Instructions
4.1 Turning On/Off
- To turn on the sander, press the 'On' side of the lock anti-dust switch.
- To turn off the sander, press the 'Off' side of the switch.

Figure 3: The anti-dust on/off switch.
4.2 Sanding Technique
- Hold the sander firmly with both hands.
- Place the sander flat on the workpiece before turning it on.
- Move the sander slowly and evenly across the surface, applying light, consistent pressure. Avoid pressing down too hard, as this can reduce sanding efficiency and damage the workpiece or sander.
- For best results, sand with the grain of the wood.
- When finished, lift the sander from the workpiece before turning it off.

Figure 4: Proper handling of the sander during operation.
5. Maintenance
Regular maintenance ensures optimal performance and extends the life of your sander.
- Cleaning: After each use, unplug the sander and clean off any dust and debris from the tool, especially around the ventilation openings and the base plate. Use a soft brush or compressed air.
- Sanding Pad Inspection: Periodically inspect the base plate and the hook and loop system for wear or damage. Replace the sanding pad if it no longer holds the sanding paper securely.
- Cord Inspection: Check the power cord for any cuts, fraying, or damage. If damaged, have it repaired by a qualified technician.
- Storage: Store the sander in a clean, dry place, out of reach of children.
6. Troubleshooting
If you encounter issues with your sander, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Sander does not turn on | No power supply; Faulty switch; Damaged cord | Check power outlet and connection; Ensure switch is fully engaged; Inspect power cord for damage. |
| Poor sanding performance | Worn sanding paper; Incorrect grit; Excessive pressure; Clogged sanding paper | Replace sanding paper; Use appropriate grit for the task; Apply light, even pressure; Clean or replace clogged paper. |
| Excessive vibration or noise | Loose sanding paper; Damaged base plate; Internal mechanical issue | Ensure sanding paper is securely attached; Inspect base plate for damage; If problem persists, seek professional service. |
| Sanding paper detaches easily | Worn hook and loop system on base plate; Incorrect sanding paper size | Replace base plate if hook and loop is worn; Ensure correct 100x110mm sanding paper is used. |
7. Specifications
Detailed technical specifications for the Ronix 6404 Electric Orbital Sander:
| Attribute | Value |
|---|---|
| Model Number | 6404 |
| Rated Input Power | 230W |
| Rated Voltage | 220-240V |
| Frequency | 50-60Hz |
| No-Load Speed | 13000 OPM (Orbits Per Minute) |
| Sand Pad Size / Base Plate | 100x110mm |
| Weight | 1.3 Kg |
| Power Source | Electric, plug powered |
| Abrasive Attachment Type | Hook and Loop |
| DIY Supplies | Electrical |
| Application / Function | Sanding, Wood Working, Polishing |
| Packing | Ronix color box |

Figure 5: Ronix Orbital Sander Model 6404 specifications.
8. User Tips
Maximize your sanding results and tool longevity with these practical tips:
- Start with Coarse Grit: Begin with a coarser grit sandpaper to remove material quickly, then progressively move to finer grits for a smoother finish.
- Dust Management: Although the sander has an anti-dust switch, consider using a dust extraction system or wearing a dust mask, especially when sanding large areas or fine dust-producing materials.
- Even Pressure: Let the sander do the work. Applying too much pressure can slow down the motor, reduce sanding effectiveness, and lead to an uneven finish.
- Check Sandpaper Regularly: Worn or clogged sandpaper is ineffective and can damage your workpiece. Replace it as soon as you notice reduced performance.
- Work in a Ventilated Area: Always ensure good ventilation to disperse dust and fumes.
9. Warranty & Support
The Ronix 6404 Electric Orbital Sander comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact the seller or authorized service center. Do not attempt to repair the tool yourself, as this may void the warranty and pose safety risks.