1. Product Overview
The Joyroom JR-ZS501 is a versatile magnetic car phone holder designed for secure mounting and convenient wireless charging in your vehicle. It offers dual mounting options for both dashboard and air vent, ensuring optimal placement for safe driving. Featuring strong N55 magnets and 15W MagSafe-compatible wireless charging, it provides a stable and efficient power solution for your smartphone.

Figure 1: Joyroom Magnetic Car Phone Holder Mount (JR-ZS501)
Package Contents

Figure 2: Package Contents
- Box
- Manual
- Positioning Paper
- Type-C Cable
- Alcohol Pack
- Magnetic Holder
- Air Vent Hook
- Dashboard Base
- Metal Sheet
- Stickers
2. Setup Instructions
2.1 Choosing Your Mounting Option
The JR-ZS501 offers two primary mounting methods: dashboard adhesive mount and air vent clip mount. Choose the option that best suits your vehicle and viewing preference.

Figure 3: Versatile Mounting Options
2.2 Air Vent Mount Installation
- Identify a suitable air vent in your vehicle. The dual-clip grip is designed for horizontal and vertical vents (refer to Figure 5 for compatibility).
- Attach the Air Vent Hook (item 7 from package contents) to the Magnetic Holder (item 6).
- Carefully insert the dual-clip grip into the air vent slat. Ensure both clips firmly grasp the slat for maximum stability.
- Tighten the locking mechanism on the air vent hook to secure the mount in place.

Figure 4: Dual-Clip Air Vent Grip

Figure 5: Air Vent Compatibility
2.3 Dashboard Mount Installation
- Select a clean, flat, and smooth surface on your dashboard. Use the Alcohol Pack (item 5) to thoroughly clean the area and let it dry completely.
- Attach the Dashboard Base (item 8) to the Magnetic Holder (item 6).
- Peel off the protective film from the 3M adhesive on the Dashboard Base.
- Carefully position the base on the cleaned dashboard surface and press firmly for at least 30 seconds to ensure strong adhesion. Allow the adhesive to cure for 24 hours before attaching your phone.

Figure 6: Dashboard Mount with 3M Adhesive
2.4 Phone Compatibility and Metal Ring Application
- For iPhone 12/13/14/15/16 Series or MagSafe-compatible cases: No metal ring is needed. The phone will magnetically attach directly to the holder.
- For Android phones, non-MagSafe cases, or iPhone 6-11 Series: A Metal Sheet (item 9) and Stickers (item 10) are provided.
- Clean the back of your phone or phone case where you intend to place the metal sheet.
- Use the Positioning Paper (item 3) to find the optimal placement for the metal sheet, ensuring it aligns with your phone's wireless charging coil.
- Peel off the backing from one of the Stickers and apply it to the back of the Metal Sheet.
- Carefully attach the Metal Sheet to your phone or case using the sticker. Ensure it is centered for best magnetic connection and wireless charging efficiency.

Figure 7: Phone Compatibility and Metal Ring Usage
3. Operating Instructions
3.1 Powering the Charger
Connect the provided Type-C Cable (item 4) to the charging port on the Magnetic Holder. Plug the other end of the cable into a QC3.0+ certified car charger (minimum 18W, not included). For optimal 15W fast charging, avoid using standard vehicle USB ports as they often provide insufficient power.

Figure 8: 15W Wireless Charging in Action
3.2 Attaching Your Phone
Once the mount is securely installed and powered, simply bring your MagSafe-compatible phone (or phone with the metal ring applied) close to the magnetic surface of the holder. The strong N55 magnets will automatically align and securely attach your phone, initiating wireless charging.

Figure 9: N55 Magnetic Array for Stable Hold
3.3 Adjusting Viewing Angle
The magnetic holder features a ball joint that allows for 360-degree rotation and tilt adjustments. Loosen the collar behind the magnetic head, adjust your phone to the desired viewing angle (portrait or landscape), and then tighten the collar to lock it in place.
Video 1: Product demonstration showing installation and usage.
4. Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the magnetic holder and mounting base. Avoid using harsh chemicals or abrasive cleaners.
- Adhesive Care: If using the dashboard mount, ensure the adhesive area remains clean and free of dust or oils to maintain its strong grip.
- Cable Care: Handle the Type-C cable gently to prevent damage to the connectors or cable insulation.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Phone not charging or charging slowly. |
|
|
| Phone not securely attaching to the mount. |
|
|
| Mount is unstable or falls off. |
|
|
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | JR-ZS501 |
| Type | Car Holder |
| Features | Magnetic, Wireless Charging |
| Charger Type | Wireless Charger (15W Max) |
| Compatible Brand | Apple iPhone (MagSafe compatible), Universal (with metal ring) |
| Magnetic Strength | N55 Strong Magnets |
| Mounting Options | Dashboard (3M Adhesive), Air Vent (Dual-Clip Grip) |
| Product Weight | 0.163 kg |
| Package Dimensions (L x W x H) | 14 cm x 12 cm x 5 cm |
7. User Tips
- Optimal Charging: Always use a QC3.0+ certified car charger (18W or higher) for the fastest wireless charging speeds. Standard car USB ports may not provide enough power for 15W charging.
- Secure Dashboard Mount: For the dashboard adhesive mount, ensure the surface is thoroughly cleaned with the alcohol wipe and allowed to dry before application. Press firmly and allow 24 hours for the adhesive to fully cure before placing your phone on the mount.
- Metal Ring Placement: If your phone or case is not MagSafe compatible, use the provided metal ring. Experiment with the positioning paper to find the sweet spot for both magnetic hold and wireless charging efficiency before permanently attaching the ring.
- Air Vent Stability: When using the air vent mount, ensure the dual clips are fully engaged with the vent slat and the locking mechanism is tightened to prevent wobbling, especially on rough roads.
8. Warranty & Support
For warranty information, technical support, or any product-related inquiries, please contact the manufacturer, Joyroom, or your point of purchase. Keep your purchase receipt as proof of purchase.