1. Important Safety Instructions
Please read and keep these instructions. Follow all warnings and operate according to the instructions.
- Do not use the device near water, in damp environments, or in the rain. Avoid spilling liquids on the device or placing objects containing liquids (such as vases) on top of it.
- Clean only with a dry cloth. Do not use liquid cleaners.
- Do not block ventilation openings or install the device in a confined space. Ensure proper ventilation and install the device according to the manufacturer's instructions.
- Do not install the device near heat sources such as radiators, stoves, amplifiers, or other devices that produce heat. Do not cover the ventilation openings with items like newspapers or curtains.
- Only use attachments, stands, or accessories specified by the manufacturer. When using equipment with wheels, exercise caution when moving to prevent tipping.
- Protect the power cord from being walked on, pinched, or bent, especially at plugs, convenience receptacles, and the point where they exit from the device.
- Do not modify the plug's polarization or grounding features. If the plug does not fit into the outlet, consult an electrician to replace the outlet.
- Unplug the power cord during lightning storms or when not in use for long periods. To completely disconnect the device from the power supply, unplug it from the wall outlet and ensure the plug is easily accessible.
- Do not place any open flame sources, such as lit candles, on the device.
- Do not attempt to open the device. High voltage inside may cause electric shock or death. There are no user-serviceable parts inside. All servicing must be performed by qualified personnel.
- The installation height of the device must not exceed 2 meters.
- DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
2. Package Contents
Verify that all items are included in the package:
- Subwoofer (x1)
- Left subunit & Right subunit (x1)
- Surround Speaker (x2)
- Soundbar Power Adapter (2m/78") (x1)
- Surround Power Adapter (3m/118'') (x1)
- HDMI Cable (1.5m/59") (x1)
- Digital Optical Cable (1.5m/59") (x1)
- 90-Degree HDMI Converter (x1)
- Surround Connection Cable (6m/236") (x4)
- Remote Control (x1)
- Wall Bracket (x4)
- Wall Mounting Kits (x8)
- Mounting Screw (x4)
3. Product Overview
3.1. System Components


3.2. Control Panel
The control panel is located on the top of the soundbar:
- Power Button (①): Press to power on / standby.
- Source Button (②): Press to switch channels: eARC-OPT(OPTICAL)-BT-USB.
- Bluetooth Button (③): Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Skywave F40 Boom).
- Volume Down (④)
- Volume Up (⑤)
3.3. Rear Panel Connections

- HDMI to TV (eARC): For connecting to your TV's eARC/ARC port.
- OPTICAL: For connecting to your TV's optical output.
- USB: Supports MP3 or FLAC files (max 128G memory).
- SUB OUT: For connecting the subwoofer.
- DC IN: Power input.
4. Setup
4.1. Soundbar Installation
Align the joints of the two soundbar parts and twist to connect them. Ensure the device is not powered on during this step.

4.2. Placement Options
For optimal sound experience, the soundbar should be placed at or near ear level.

4.3. Wall Mount Installation
Use the provided wall brackets and mounting kits to securely mount the soundbar on a wall. Refer to the diagram for proper alignment and screw placement.

4.4. Connect and Power On
Connect the Soundbar to the "DC IN" port using the power adapter, and plug it into a power outlet.

How to connect the soundbar to its power source. Use the RCA cable to connect the two surround speakers. Insert the red plug into the left surround speaker and the white plug into the right surround speaker. Then power the surround speakers using their dedicated power adapter.

Connecting the surround speakers using RCA cables. Connect the RCA plug on the subwoofer to the "SUB OUT" port on the Soundbar.

Connecting the subwoofer to the soundbar.
4.5. Connect to TV via HDMI Out ARC
- Connect one end of the HDMI cable to the eARC/ARC port on the back of your TV.
- Then connect the other end into the eARC port of the soundbar.
- Press the "eARC" button on the remote control to select "eARC" input.

Note: Make sure your TV HDMI supports eARC, otherwise the Dolby Atmos audio signal cannot be transmitted.
Dolby Atmos: If you are watching a movie in the Dolby Atmos format, please set the audio output on your TV to Pass Through (e.g., TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through).
DTS: If you are watching a movie in the DTS format, please set the audio output on your TV to PCM (e.g., TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
CEC Function: When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously. To enable this, turn on / standby and adjust the volume using your TV remote.
4.6. Connect to TV via Optical Cable
- Make sure the TV's port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
- Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical.

Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume. In Optical Mode: Please set the TV audio output to PCM (e.g., TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
4.7. Connect to Bluetooth
- Press the "③" button on the soundbar or press the "⑤" button on the remote control to enter Bluetooth pairing mode.
- Go to the Bluetooth setting on your phone, find and select "Skywave F40 Boom" to connect the soundbar.
- If it's already in the Bluetooth mode and connected, press and hold the "⑤" button for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV.

4.8. Re-pair Surround Speakers
Normally, the Soundbar and subwoofer are pre-paired. If the connection is lost, please follow these steps:
- Press and hold the center "Surround" button on the remote control for 5 seconds. The main unit display will flash "SUB" to indicate pairing mode.
- Press and hold the pairing button on the back of the subwoofer for 5 seconds to enter pairing mode.
- When pairing is successful, the main unit display will stop flashing and the subwoofer indicator light will remain steadily on.
5. Operating Instructions
5.1. Remote Control Functions

- Power Button (①): Press to power on / standby.
- Source Button (②): Press to switch channels.
- eARC (③): Press to switch to HDMI ARC channel.
- OPT (④): Press to switch to OPTICAL channel.
- BT (⑤): Press to switch to BLUETOOTH channel.
- USB REPEAT (⑥): Press to switch between one track looping and all list looping.
- USB (⑦): Press to switch to USB channel.
- EQ RESET (⑧): Press to bring all EQ Presets back to default.
- Xupmix (⑨): The default setting is "on," allowing for unified control over the activation and deactivation of 6 sound effect modes. Xupmix on provides rich multi-channel surround sound. Xupmix off optimizes surround sound based on left and right channel signals.
- Volume Up (⑩)
- Volume Down (⑪)
- Previous (⑫): For BT and USB mode only: Skip to previous track.
- Next (⑬): For BT and USB mode only: Skip to next track.
- Play / Pause (⑭): For BT and USB mode only.
- MUTE (⑮)
- LED DIMMER (⑯): Press to adjust display brightness in 5 levels. Press and hold for 3s to turn off the LED display.
- BASSMX (⑰): Press to adjust bass level, the display will show: "B5-6" to "B5 6".
- MIDRANGE (⑱): Press to adjust alto level, the display will show: "MR-6" to "MR 6".
- TREBLE (⑲): Press to adjust treble level, the display will show: "TB-6" to "TB 6".
- MOVIE (⑳): Press to switch to MOVIE mode, the display will show: "MOVI".
- MUSIC (⑴): Press to switch to MUSIC mode, the display will show: "MUSC".
- VOICE (⑵): Press to switch to VOICE mode, the display will show: "VOIC".
- SPORT (⑶): Press to switch to SPORT mode, the display will show: "SPRT".
- GAME (⑷): Press to switch to GAME mode, the display will show: "GAME".
- NIGHT (⑸): Press to switch to NIGHT mode, the display will show: "NIGT".
- SURROUND (⑹): Press to adjust surround sound level, the display will show: "SR-6" to "SR 6".
- UP-FIRING (⑺): Press to display the current sky unit volume.
5.2. Smart App Control
The ULTIMEA App allows for advanced control and customization of your sound system.

- 10-Band Graphic EQ: Optimize your sound with precise equalizer settings.
- 121 Preset Sound Settings: Choose from a wide range of preset EQ matrices to customize your audio style.
- 13-Step Level Adjustment: Fine-tune surround sound levels from -6 to +6.
- OTA Updates: Receive seamless firmware updates to unlock new features and maintain peak performance.


5.3. Sound Technologies
- Dolby Atmos: Creates a lifelike, multidimensional audio experience with sound that moves around and above you.
- SurroundX™ Technology: Combines rear surround speakers and dual up-firing Atmos drivers for a true 360° sound field. (Note: Not compatible with DTS.)
- BassMX Technology: Features an upgraded 6.5-inch subwoofer with a larger 25mm voice coil, 18mm excursion, and an expanded 7.2L wooden cabinet for powerful and resonant low frequencies down to 40Hz.
- VoiceMX™ Technology: Dynamic EQ and adaptive gain amplify speech clarity in the key vocal range (300Hz-3kHz).


6. Maintenance
To ensure the longevity and optimal performance of your ULTIMEA Skywave F40 Boom soundbar system, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surfaces of the soundbar, subwoofer, and surround speakers. Avoid using liquid cleaners, abrasive cloths, or chemical solvents, as these can damage the finish.
- Ventilation: Ensure that all ventilation openings on the devices are clear and unobstructed. Do not place the units in enclosed spaces or cover them with materials like newspapers or curtains, which can lead to overheating.
- Cable Management: Periodically check all cables for any signs of wear, pinching, or damage. Ensure cables are not tightly bent or placed where they can be walked on.
- Storage: If storing the system for an extended period, disconnect it from power, clean the units, and store them in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your soundbar system, refer to the following common troubleshooting tips:
- No Sound:
- Check all cable connections (HDMI, Optical, Power) to ensure they are secure.
- Verify that the correct input source is selected on the soundbar (e.g., eARC, OPT, BT, USB).
- Ensure the TV's audio output settings are correctly configured (e.g., Pass Through for Dolby Atmos, PCM for DTS/Optical).
- Check the volume levels on both the soundbar and your TV.
- No Surround Sound / Rear Speakers Not Working:
- Ensure the surround speakers are properly connected and powered on.
- If the connection is lost, follow the re-pairing instructions in Section 4.8.
- Verify that the audio content you are playing supports surround sound.
- Bluetooth Connection Issues:
- Ensure the soundbar is in Bluetooth pairing mode.
- Check that Bluetooth is enabled on your device (phone, PC, TV).
- Forget the device from your Bluetooth settings and try re-pairing.
- Ensure your device is within the effective range (typically 10m/33ft).
- Remote Control Not Responding:
- Check and replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the soundbar.
- Distorted Sound:
- Check for loose cable connections.
- Try adjusting the EQ settings in the ULTIMEA App or on the remote.
- Ensure the soundbar is not placed too close to other electronic devices that might cause interference.
If the problem persists after trying these steps, please contact ULTIMEA customer support.
8. Specifications
| Feature | Description |
|---|---|
| Model Number | U4123 |
| Power Supply | DC 24V=3A (Soundbar) / DC 14V=1A (Surround) |
| Soundbar Drivers | Soundbar: 3.4" x1.5" x 3 + 1.75" x 2, Surround: 2" x 2, Subwoofer: 6.5" x 1 |
| Frequency Response | 45Hz - 20kHz (-6dB) |
| Auto Standby | Turns to standby if no audio signal for 15 minutes (configurable via App) |
| Standby Power | <0.5W |
| Operating Temperature | -10 ℃ - 45 ℃ / 14 ℉ - 113 ℉ |
| Bluetooth Version | 5.4 |
| Soundbar Dimensions | 800 x 46 x 90 mm / 31.5" x 1.81" x 3.54" |
| Subwoofer Dimensions | 200 x 315 x 234 mm / 7.87" x 12.40" x 9.21" |
| Surround Speaker Dimensions | 69 x 120 x 69 mm / 2.72" x 4.72" x 2.72" |
| Packaging Dimensions | 330 x 440 x 250 mm / 12.99" x 17.32" x 9.84" |
| Net Weight | 7.2 kg / 16.67 lbs |
| Gross Weight | 8.0 kg / 17.64 lbs |
For a detailed user manual in PDF format, please refer to the official document: ULTIMEA Skywave F40 Boom User Manual (PDF)
9. User Tips
- Complete Package: The system comes with all necessary accessories, including speaker stands, wall screws, and cables for all modules, making setup convenient.
- Sound Quality for Price: Users consistently praise the sound quality, noting it's excellent for the price point.
- Apartment Use: The sound system is described as clear and powerful enough for apartment living.
- Aesthetic Appeal: The design is considered elegant and visually appealing.
- Black Friday Deals: Some users reported getting good deals during promotional periods, suggesting it's worth looking out for discounts.
10. Frequently Asked Questions (FAQ)
- Can I connect a Bluetooth device to this system?
Yes, the ULTIMEA Skywave F40 Boom supports Bluetooth connectivity. You can connect your Bluetooth devices by selecting the BT source and pairing your device.
- Can I buy a 7.1 Dolby Atmos wireless sound bar?
The ULTIMEA Skywave F40 Boom is a 5.1.2 channel Dolby Atmos system. For 7.1 channel systems, you would need to check other product offerings, as this model specifically provides 5.1.2 channel audio.
11. Warranty and Support
For product support, warranty information, or technical assistance, please contact ULTIMEA customer service:
- US Support: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
- EU Support: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
- Email Support: support@ultimea.com
You can also download the ULTIMEA App and search for "ULTIMEA" on social media for additional resources and community support.
12. Regulatory Compliance
12.1. Proper Disposal Instructions
This mark shown on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
12.2. Wireless Frequency Range and Output Power
Frequency: 2.402GHz-2.48GHz
The Max. transmit power (Applies only to the EU): 10 dBm
12.3. FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
12.4. ISED Warnings
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in issue 6 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
12.5. EU Declaration of Conformity
ULTIMEA Technology (Shenzhen) Limited declares that the product, Model No.: U4123, is in conformity with the essential requirements of RED Directive (2014/53/EU) & RoHS (2011/65/EU). Applicable standards include EN 55032, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 300 328, EN 50663, EN IEC 62368-1, and IEC 62321 series.
Trade Marks:
- Dolby Atmos: Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories.
- Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ultimea Technology (Shenzhen) Limited is under license.
- HDMI™: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.