SoBuy NKD03-W

Contents

SoBuy NKD03-W Floating Bedside Table Instruction Manual

Model: NKD03-W

Brand: SoBuy

Introduction

This manual provides detailed instructions for the assembly, installation, use, and maintenance of your new SoBuy NKD03-W Floating Bedside Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference. The decorative elements shown in product images are not included in the delivery.

Setup and Installation

Your SoBuy NKD03-W Floating Bedside Table comes in a flat pack and requires self-assembly. Detailed instructions and hardware are supplied with the product. Please ensure all components are present before starting assembly.

Assembly Steps:

  1. Unpack and Verify: Carefully unpack all components and compare them against the parts list provided in your product packaging. Ensure no parts are missing or damaged.
  2. Assemble Main Unit: Follow the step-by-step diagrams in the included assembly guide to construct the main body of the bedside table.
  3. Prepare for Wall Mounting:

    Identify the desired location on your wall. Consider the height for comfortable access from your bed or sofa. Ensure the wall material is suitable for mounting (e.g., solid wood, studs, or appropriate drywall anchors).

    Back view of the floating bedside table showing mounting points
    Figure 1: Rear view of the bedside table, highlighting the pre-drilled mounting points.
    Diagram showing dimensions and wall mounting points
    Figure 2: Dimensions and illustration of wall mounting hardware placement.
  4. Mark and Drill: Use the pre-drilled holes on the back of the bedside table as a template to mark the drilling points on your wall. Drill pilot holes and insert appropriate wall anchors (not always included, depending on wall type).
  5. Mount Securely: Carefully align the bedside table with the drilled holes and secure it to the wall using the provided screws. Ensure it is level and firmly attached before placing any items on it.
  6. Insert Drawer: Slide the drawer into its designated compartment.

Operating Instructions

The SoBuy NKD03-W Floating Bedside Table is designed to provide convenient storage and display space in your bedroom or living area.

Storage Features:

  • Top Shelf: Use the top surface for displaying decorative items, a lamp, or keeping frequently accessed items like a phone or a glass of water.
  • Open Compartment: The open shelf below the top provides easy access storage for books, magazines, or other small essentials.
  • Slide-Out Drawer: A smooth-gliding drawer offers concealed storage for personal items, keeping your space tidy and organized.
Floating bedside table with a lamp, books, and candles on top and in the open shelf
Figure 3: The bedside table in use, showcasing its top shelf and open compartment.
Close-up views of the shelf, drawer, compartment, and handle
Figure 4: Detailed views of the shelf, drawer, compartment, and integrated handle.
Floating bedside table with the drawer open, revealing stored items
Figure 5: The drawer open, demonstrating its storage capacity.

Maintenance

To ensure the longevity and appearance of your floating bedside table, follow these simple maintenance guidelines:

  • Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the MDF material.
  • Dusting: Regularly dust with a dry, soft cloth to prevent buildup.
  • Spills: Clean up spills immediately to prevent staining or damage to the finish.
  • Drawer Mechanism: If the drawer becomes stiff, a small amount of silicone spray on the runners can help maintain smooth operation.
  • Check Fasteners: Periodically check all mounting screws and assembly fasteners to ensure they remain tight. Retighten if necessary to maintain stability.

Troubleshooting

Here are some common issues and their solutions:

  • Table feels wobbly after installation:
    • Ensure all wall mounting screws are fully tightened.
    • Verify that appropriate wall anchors were used for your specific wall type.
    • Check if the wall surface is even. Shims may be needed for uneven surfaces.
  • Drawer does not slide smoothly:
    • Check for any obstructions in the drawer runners.
    • Ensure the drawer is correctly aligned within its compartment.
    • Apply a small amount of silicone lubricant to the drawer runners.
  • Visible gaps in assembled parts:
    • Ensure all cam locks and screws are fully tightened during assembly.
    • Disassemble and reassemble the affected section, paying close attention to alignment.

Specifications

Feature Detail
Material MDF (Medium-Density Fiberboard)
Dimensions (W x D x H) 45 cm x 25 cm x 22 cm (17.7 in x 9.8 in x 8.7 in)
Weight 5 kg (11 lbs)
Load Capacity 10 kg (22 lbs)
Color White
Assembly Required Yes (Flat pack with detailed instructions)

User Tips

  • Wall Type Consideration: Before drilling, always confirm your wall type (e.g., drywall, plaster, concrete, brick) and use appropriate wall anchors and screws for secure mounting. If unsure, consult a professional.
  • Leveling: Use a spirit level during installation to ensure the bedside table is perfectly horizontal for both aesthetic appeal and stability.
  • Weight Distribution: Distribute weight evenly on the top shelf and inside the drawer to prevent undue stress on the mounting points.

Warranty and Support

For any questions regarding assembly, missing parts, or product defects, please contact the seller directly through your purchase platform. Keep your order details handy for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.