1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the MACHINIST X99 MR9S Motherboard. It is designed to assist users in setting up their system correctly and efficiently. The MACHINIST X99 MR9S is an ATX form factor motherboard supporting Intel LGA 2011-3 series processors, DDR4 memory, and features modern connectivity options including NVMe M.2 and USB 3.0.
2. Safety Information
- Always disconnect the power supply before installing or removing any components.
- Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.
- Handle the motherboard by its edges to avoid touching sensitive components.
- Ensure proper ventilation within your PC case to prevent overheating.
- Do not expose the motherboard to moisture or extreme temperatures.
- A power supply of at least 500W from a reputable brand is recommended for stable operation.
3. Package Contents
The 'Motherboard + CPU + RAM' bundle typically includes the following items:
- 1 x MACHINIST X99 MR9S Motherboard
- 1 x Used Intel Xeon E5 2680 V4 Processor
- 2 x DDR4 16GB 2133MHz Server Memory modules (with black heat sinks)
- 1 x I/O Shield
- 1 x SATA Cable
- 1 x LGA 2011 Heat Sink
Note: The CMOS battery is not included due to shipping regulations.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | MACHINIST |
| Model | X99 MR9S |
| Form Factor | ATX |
| Socket Type | LGA 2011-3 |
| Chipset | B85/X226/Q87 |
| Processor Compatibility | Intel LGA 2011-3 series processors (e.g., Intel Xeon E5) |
| Memory Type | DDR4 (Desktop and ECC memory) |
| Memory Slots | 8 |
| Memory Channel | Four |
| Max RAM Capacity | 256GB (32GB x 8) |
| Supported Memory Frequencies | 2133/2666/3200 MHz |
| Storage Interface Type | SATA, M.2 (NVMe) |
| Number of SATA Ports | 6 (4 x SATA 3.0, 2 x SATA 2.0) |
| Number of M.2 Slots | 3 (1 x PCIE, 1 x SATA, 1 x WiFi SATA) |
| PCIe Slots | 3 x PCIe X16, 1 x PCIe X1, 1 x PCIe 3.0 |
| PCI-E Standards | PCI-E 3.0 |
| Back I/O Ports | PS/2 (1 KB, 1 MS), 4 x USB 2.0, 2 x USB 3.0, 1 x RJ45 (Gigabit LAN), Audio (7.1 channel) |
| Onboard Connectors & Header | 24-pin Main Power, CPU Fan, AAFP, 4-pin +12V Power, TPM2.0 (14-pin), Buzzer interface |
| Max LAN Speed | 1000Mbps |
| Dimensions | 305mm x 245mm |
| Power Supply Requirement | Minimum 500W brand power supply |
| RAID Supported | No |
| Battery Included | No (CMOS battery) |
5. Setup Guide
5.1 Motherboard Layout and Connectors
Familiarize yourself with the various ports and connectors on the motherboard before installation.
5.2 Memory (RAM) Installation
The X99 MR9S motherboard supports four-channel DDR4 memory. Proper installation is crucial for system stability.
- For 2 RAM modules: Insert them into the outermost black slots on the left and right sides of the CPU socket.
- For 4 RAM modules: Insert them into the outermost black slots on the left and right sides, and then the next pair of black slots inwards.
5.3 TPM 2.0 Interface
The latest version of the X99 MR9S motherboard includes a TPM 2.0 (Trusted Platform Module) 14-pin interface. This feature is beneficial for:
- Meeting Windows 11 mandatory requirements.
- Enhancing data encryption protection.
- Preventing malware from loading during startup through the "Secure Boot" feature.
5.4 M.2 and SATA Storage Installation
The motherboard is equipped with NVMe M.2 PCIe 3.0 x4 high-speed interfaces and SATA M.2 interfaces, along with 4 SATA 3.0 interfaces for various storage options.
5.5 Power Supply Connection
Connect the 24-pin main power connector and the 4-pin +12V CPU power connector from your power supply to the motherboard. Ensure all connections are secure.
6. Operating Instructions
After all components are securely installed and connected, you can power on your system. The motherboard features a diagnostic card and a buzzer interface to assist with initial boot-up and fault identification.
6.1 First Boot
- Press the power button on your PC case.
- Observe the diagnostic card display for POST codes. Refer to your CPU/motherboard manual for specific code meanings if issues arise.
- Listen for beep codes from the buzzer, which can indicate hardware issues.
- Enter the BIOS/UEFI setup to configure system settings, boot order, and verify component recognition.
7. Maintenance
- Regularly clean dust from inside your PC case, especially around fans and heatsinks, to maintain optimal cooling.
- Ensure all cables and connectors are securely seated.
- Update BIOS/UEFI firmware as recommended by the manufacturer for improved compatibility and performance.
- The motherboard features a full-coverage MOS tube fan cooling module for enhanced heat dissipation. Ensure this fan is clear of obstructions.
8. Troubleshooting
8.1 Diagnostic Card and Buzzer
The integrated diagnostic card provides quick fault finding by displaying error codes. The buzzer interface also helps identify faults through sound patterns.
8.2 Common Issues
- No Power: Check power supply connections (24-pin and 4-pin CPU power), ensure power supply is switched on, and test with a known good power supply if possible.
- No Display: Verify graphics card installation, monitor connection, and try reseating RAM modules. Check diagnostic codes.
- System Instability/Crashes: Ensure RAM is correctly installed (refer to section 5.2), check CPU cooler installation, and verify power supply stability.
- Incompatible Memory: Use international brands such as Samsung, Kingston, Sandee, Micron, and Hynix. Other brands may not be compatible.
9. User Tips
- TPM 2.0: The latest version of this motherboard supports TPM 2.0, which is a key requirement for Windows 11 and enhances system security.
- Bundle Options: If you purchased a bundle, the motherboard will come with the specified CPU (e.g., E5 2680 V4) and RAM (e.g., 32GB DDR4). If you purchased the motherboard separately, these components are not included.
- Memory Frequency: The motherboard supports DDR4 memory at 2133MHz, 2666MHz, and 3200MHz. Ensure your RAM modules are compatible with these frequencies.
10. Warranty and Support
For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.
