1. Introduction and Overview
The RX MULTI Tuya receiver is a versatile device designed to control garage doors, gate automation systems, and other remote-controlled equipment. It is available in two main versions: a WIFI+RF version for smart home integration and an RF-only version for traditional remote control. Both versions support a wide range of operating voltages (AC/DC 9-30V or AC 85-250V) and frequencies (300MHz to 868MHz), making it compatible with a vast majority of remote controls on the market.
This manual provides detailed instructions for the setup, operation, and programming of your RX MULTI receiver and its compatible remote controls.
Video: Overview of RX-MULTI receiver versions and features.
Image: Comparison of the WIFI+RF version (black) and RF-only version (white) of the receiver.
Image: The RX-MULTI receiver shown with an antenna and examples of compatible BENINCA remote controls.
Image: RX-MULTI receiver highlighting compatibility with specific BENINCA remote models.
Important Compatibility Note:
The RX MULTI receiver is designed to be compatible with a wide range of remote controls. However, it is crucial to verify that your existing remote control's model, frequency, and code type match the receiver's capabilities. The following BENINCA models are specifically compatible:
- BENINCA T2WV
- BENINCA T4WV
- BENINCA T2WK
- BENINCA T4WK
- BENINCA TO.GO 2VA
- BENINCA TO.GO 4VA
- BENINCA TO.GO 2WV
- BENINCA TO.GO 4WV
- BENINCA TO.GO 2WP
- BENINCA TO.GO 4WP
Please note that some BENINCA models are NOT compatible. Refer to the image below for examples of incompatible models.
Image: Examples of BENINCA remote control models that are NOT compatible with this receiver.
2. Specifications
Receiver Specifications
| Attribute | Value |
|---|---|
| Product Name | TUYA RX-MULTI WIFI Receiver |
| Model Number | YNG206 |
| Operating Voltage | AC/DC 9V-30V or AC 85-250V |
| Channels | 2 |
| Frequency | 300MHz - 868MHz (AM/FM280-915MHz) |
| Code Types Supported | Rolling Code, Fixed Code, Learning Code (e.g., HCS301, 2262, 1527) |
| Wireless Distance | 30m-100m |
| Dimensions | 56mm x 46mm x 20mm |
| Max Remote Controls | 400 |
| Working Temperature | -40℃ to +80℃ |
| Material | Metal and PVC |
| Smart Home Platform | Tuya (for WIFI+RF version) |
| Certifications | CE, FCC, RoHS, WEEE |
Remote Control Specifications (if included)
| Attribute | Value |
|---|---|
| Operating Frequency | 433MHz |
| Battery Type | CR2016X2 (3V, not included) |
| Material | PVC |
| Buttons | 2 buttons |
| Encoding Type | 1527 Learning Code |
| Transfer Distance | 20-50m |
3. Setup and Installation
Package Contents
- RX MULTI Receiver
- Small Antenna
- English Manual
Power Input Selector (PIS)
The receiver can operate with AC/DC 9V-30V or AC 85-250V. It is essential to correctly set the Power Input Selector (PIS) according to your power source:
- If the input voltage is greater than 24V, shorten pins 2 & 3.
- If the input voltage is less than 24V, shorten pins 1 & 2.
Wiring Diagram Example
Connect the receiver to your motor and controller as shown in the diagram below. Ensure all connections are secure and follow local electrical codes.
Image: Example wiring diagram for connecting the receiver to a motor and controller for a 433.92MHz Universal Rolling Open Code system.
Physical Installation
Mount the receiver in a secure, dry location, away from direct weather exposure. Connect the small antenna to the designated ANT terminal for optimal signal reception.
Image: Top view of the AC/DC 9-30V WIFI receiver, showing terminals and DIP switches.
Image: Top view of the AC 85-250V WIFI receiver, showing terminals and DIP switches.
Image: Top view of the AC/DC 9-30V RF-only receiver, showing terminals and DIP switches.
4. Operating Instructions
4.1 Mobile App Control (WIFI+RF Version Only)
For the WIFI+RF version, you can control your device using the Tuya or Smart Life mobile application.
- Connect to WiFi: Ensure your receiver is powered on and within range of a 2.4G WiFi network. Follow the app's instructions to add the device to your network.
- Remote Monitoring: Once connected, you can open or close the door remotely via the app. The app also provides real-time status updates (open/closed).
- Voice Control: Integrate with voice assistants like Alexa Echo or Google Home for hands-free control.
- Timer Function: Set schedules within the app to automatically open or close your garage door at specific times.
- Countdown Function: Configure a countdown timer for automatic closing or opening.
- Device Sharing: Authorize multiple users (family members) to access and control the device through the app, enhancing convenience and security.
Image: Controlling a garage door via the mobile app.
Image: The device sharing function, allowing multiple users to control the smart garage door opener.
4.2 RF Control
After successfully programming your remote control (see Section 5), simply press the corresponding button on the remote to operate the connected device (e.g., open/close a garage door or gate).
Image: Controlling a garage door using an RF remote control.
5. Programming Remote Controls
The RX MULTI receiver features 8 DIP switches that allow you to select the correct brand and frequency for the remote control you wish to program.
Programming a New Remote
- Select Brand/Frequency: Identify the brand and frequency of the remote control you want to program. Adjust the 8 DIP switches on the receiver (UP or DOWN) to match the required combination for that remote. For example, for 433.92MHz Flor-s remote controls, move DIP switch 8 UP. Refer to the diagram below for common DIP switch settings.
- Press Learn Button: Press the 'Learn' button on the receiver. The LED indicator will turn on.
- Activate Remote: Press the button on your remote control that you wish to program. The receiver's LED will flash 4 times, indicating successful programming.
- Repeat for Additional Buttons: If your remote has multiple buttons, repeat step 2 and 3 for each button you want to program.
- Second Channel: The programming procedure for the second channel is identical.
Image: DIP switch settings on the receiver for various universal fixed and rolling codes at different frequencies.
Erasing All Stored Data
To erase all remote control data from the receiver's memory:
- Press and hold either 'Learn' button on the receiver.
- The LED will begin to flash. Continue holding the button until the LED turns off.
- All previously saved remote control data will be permanently erased and cannot be recovered.
Important Note on Remote Control Usage
The remote control provided with the receiver (if applicable) is specifically designed to work with this receiver. It cannot be used to program or copy other original receivers or remote controls. It is not a universal cloning remote.
Image: Close-up view of the 2-button remote control.
Image: The remote control, indicating it uses CR2016X2 (3V) batteries, which are not included.
Image: The remote control with a clear warning that it is 'NOT FOR CLONING'.
6. Applications
The RX MULTI Tuya receiver is suitable for a wide range of applications, including but not limited to:
- Garage Doors
- Gate Doors (Electric Gates, Swing Gates)
- Motorcycles and Car Alarm Products
- Home Security Systems
- Short-range Wireless Remote Control Products
- Industrial Control Systems
- Alarm Systems
- Lifting Equipment and Devices
- Lighting Control
- Water Pumps
- Stage Equipment
Image: Diagram illustrating diverse applications of the receiver, such as garage doors, gates, lighting, and industrial equipment.
Image: Diagram illustrating various applications of the remote control, including stretch doors, car access, and controlling different types of equipment.
7. Troubleshooting
- Remote Control Not Working:
- Ensure the remote control is properly programmed to the receiver (refer to Section 5).
- Check the battery in the remote control (CR2016X2, 3V). Replace if necessary.
- Verify that the DIP switches on the receiver are correctly set for the remote's brand and frequency.
- WIFI+RF Version Not Connecting to App:
- Confirm your WiFi network is 2.4Ghz. The device does not support 5Ghz networks.
- Ensure the receiver is within range of your WiFi router.
- Check that the receiver's power input selector (PIS) is correctly configured for its voltage.
- Restart the receiver and try the pairing process again.
- Compatibility Issues:
- While the receiver supports a broad range of frequencies and code types, specific brand compatibility (e.g., BFT, Alutech) should be verified by checking if their frequency and code type match the receiver's capabilities and DIP switch settings.
- Always refer to the list of explicitly compatible and incompatible remote models provided in Section 1.
- No Response from Device:
- Check all wiring connections to ensure they are secure and correct.
- Verify that the receiver is receiving power.
8. Maintenance
- Cleaning: Keep the receiver and remote control clean and dry. Avoid using harsh chemicals or abrasive materials.
- Environmental Conditions: Do not expose the device to extreme temperatures, humidity, or direct sunlight.
- Battery Replacement (Remote Control): If the remote control's range decreases or it stops responding, replace the CR2016X2 (3V) batteries. Ensure correct polarity when inserting new batteries.
9. User Tips
- Maximum Remotes: The receiver can store programming for up to 400 remote controls, allowing extensive multi-user access.
- Compatibility Verification: Before purchasing or attempting to program, always confirm that your remote control's frequency and code type are supported by the RX MULTI receiver. If your remote is not explicitly listed as compatible, check its specifications against the receiver's supported frequencies and code types (Fixed, Learning, Rolling).
- Seek Assistance: If you encounter difficulties during setup or operation, or if you are unsure about compatibility, contact customer support for a manual or usage video in your local language.
10. Warranty and Support
For any product-related issues, technical assistance, or warranty claims, please contact the seller or manufacturer's support channel. Ensure you have your product model (YNG206) and purchase details available when contacting support.
