VGN S99

VGN S99 Mechanical Keyboard User Manual

Model: S99

1. Product Overview

The VGN S99 is a high-performance 98-key mechanical keyboard designed for e-sports and general computing. It features a tri-mode connection (2.4G wireless, Type-C wired, Bluetooth 5.0), hot-swappable switches, PBT keycaps, and a personalized backplane. The keyboard is built with a multi-layer silencing structure and a Gasket leaf spring structure for an enhanced typing experience.

VGN S99 Keyboard overview with key features listed
Figure 1: VGN S99 Keyboard with highlighted features such as tri-mode connection, Texade design, four-layer soundproofing, ergonomics, original height keycap, PBT material keycap, fine adjustment of satellite axis, slotted positioning plate, 1000Hz return rate, Win/Mac universal compatibility, 6000mAh battery, personalized backplane, streamed light indicator, full key hot swap, full key anti-ghosting, and leaf spring type structure.

Package Contents

Packaging Information for VGN S99 Keyboard
Figure 2: Packaging accessories included with the VGN S99 keyboard.
  • User Manual
  • USB-A to USB-C Data Cable
  • 2-in-1 Keycap Puller
  • Dust cover
  • Warranty Certificate
  • 2.4G Wireless Receiver
  • Spare Same Model Switches (Aurora Ice Cream Switch 3 pcs or Anya Switch 5 pcs)

Note: In customized hot plug operation, there may be damage to the shaft body. The spare shaft is used to replace the damaged shaft.

2. Setup and Connection

Quick Start Guide

Quick Start Guide for VGN S99 Keyboard connections
Figure 3: Quick Start Guide showing the receiver slot, mode switch, and connection methods.

Tri-Mode Connection

The VGN S99 keyboard supports three connection modes: Wireless 2.4G, Type-C (Wired), and Bluetooth 5.0. The mode switch is located on the bottom of the keyboard.

Tri-mode connection diagram for VGN S99 Keyboard
Figure 4: Diagram illustrating the three connection modes: Wireless 2.4G, Type-C, and Bluetooth 5.0.

2.1 Wireless 2.4G Connection

  1. Press the cover of the receiver slot to remove the receiver from the keyboard.
  2. Plug the receiver into the computer's USB port.
  3. Switch the mode toggle at the bottom of the keyboard to the 2.4G mode position.
Receiver reception slot on VGN S99 Keyboard
Figure 5: Location of the receiver reception slot on the personalized backplane.

2.2 Type-C (Wired) Connection

  1. Plug the USB-C cable into the port on the keyboard.
  2. Connect the other end of the cable to your computer.
  3. Toggle the mode switch at the bottom of the keyboard to the center position (wired mode).

2.3 Bluetooth 5.0 Connection

  1. Switch the bottom mode toggle to Bluetooth mode.
  2. Long press FN + number key 1, 2, or 3 to start pairing. The indicator light will flash to support pairing of up to 3 devices.
  3. Press FN + numeric key 1, 2, or 3 to switch between paired devices.
Bluetooth Pairing Instructions for VGN S99 Keyboard
Figure 6: Detailed instructions for Bluetooth pairing and device switching.

3. Operating Instructions

3.1 Key Functions and Layout

The VGN S99 features a 99-key compact layout, retaining full key functions while saving 20% of desktop space compared to traditional 104-key keyboards. It supports full key anti-ghosting for precise input during gaming or fast typing.

Array layout of VGN S99 Keyboard showing 99-key compact design
Figure 7: The 99-key compact array layout of the VGN S99 keyboard.

The keyboard includes multimedia function keys for convenient control of media playback and volume. Refer to the keyboard's keycap legends for specific multimedia functions, typically accessed via the FN key combination.

3.2 Backlight Effects (RGB)

The VGN S99 features 16 million color RGB backlight effects. These can be customized using the VGN HUB software.

3.3 VGN HUB Software

The VGN HUB is a self-developed driver software designed to manage VGN's multiple products. It allows for customization of key assignments, macro creation, and backlight effects. Download the VGN HUB software from the official VGN website.

VGN HUB software interface for keyboard customization
Figure 8: Screenshot of the VGN HUB software interface, showing options for light settings, key settings, and other configurations.

4. Maintenance

4.1 Cleaning

  • Use the provided dust cover when the keyboard is not in use to prevent dust accumulation.
  • For general cleaning, use a soft, dry cloth.
  • To clean between keycaps, use a can of compressed air.
  • For deeper cleaning, use the keycap puller to remove keycaps and clean the switch area.

4.2 Switch Replacement (Hot-Swappable)

The VGN S99 features hot-swappable switches, allowing for easy replacement without soldering. Use the provided 2-in-1 keycap puller to carefully remove keycaps and then the switch puller to remove the switch. Insert a new compatible 3-pin or 5-pin mechanical switch, ensuring the pins align correctly with the PCB sockets.

Equipped with shaft types: Aurora Ice Cream Shaft and Ania axis
Figure 9: Examples of compatible switches like Aurora Ice Cream Shaft and Ania axis, showing their trigger force and stroke specifications.

Caution: When replacing switches, ensure the keyboard is disconnected from power. Apply gentle, even pressure to avoid bending switch pins or damaging the PCB.

5. Troubleshooting

  • Keyboard not responding: Check the connection mode switch (2.4G, Type-C, Bluetooth) at the bottom of the keyboard. Ensure the correct mode is selected for your connection type.
  • Wireless connectivity issues: For 2.4G wireless, ensure the receiver is securely plugged into a USB port. For Bluetooth, ensure the keyboard is in pairing mode (FN + 1/2/3) and your device's Bluetooth is enabled and searching. Try re-pairing if issues persist.
  • Input delay or lag: In wireless modes, ensure the keyboard is within range of the receiver/device and there are no significant obstructions. Other wireless devices might cause interference. The keyboard features SMARTSPEED ultra-low latency technology, but environmental factors can still affect performance.
  • Keys not registering: If specific keys are not working, try replacing the switch for that key (refer to Section 4.2). Ensure the keycap is properly seated.
  • Backlight not working: Check VGN HUB software settings for backlight control. Ensure the keyboard battery has sufficient charge.
  • Keyboard not charging: Ensure the Type-C cable is properly connected to both the keyboard and a powered USB port.

6. Specifications

Detailed specifications table for VGN S99 Mechanical Keyboard
Figure 10: Comprehensive specifications for the VGN S99 Mechanical Keyboard.
VGN S99 Mechanical Keyboard Specifications
Feature Description
Product Name VGN S99 GASKET Customized Mechanical Keyboard
Color Matching Far Mountain Blue / Colorful Green / Gilded Black (Nano Coating)
Axis (Switches) Ania axis, Aurora Ice Cream Shaft, Qilian Mountain Axis (depending on variant)
Layout 98% Layout, 99 Keys
Structure Single Key Slot, Leaf Spring GASKET Structure
PCB Single-key slotting PCB
Positioning Plate Slotted PC positioning plate / FR4 Black Gold Positioning Plate
Internal Fill PO Cotton + IXPE Shaft Bottom Padding + Shaft Seat Cotton + Silicone Bottom Pad / Five-layer padding: PO Cotton + Shaft Seat Cotton + Axle Underpad Silicone Underpad
Satellite Axis VGNV1 satellite shaft
Connection Method Wired, 2.4G wireless, Bluetooth three mode
Keycap Original class GMK-PBT key cap
Battery 6000mAh
Backlight 16 million Color RGB
System Support WINDOWS / MACOS / LINUX
Transmission Scheme Supports VGNHUB, supports SMARTSPEED ultra-low latency
Keyboard Polling Rate 1000Hz
Dimensions (L x W x H) 385.7mm x 143.3mm x 46mm (Height: 21mm)
Weight 1.6 kg

All size-related numerical parameters above are measured manually; if there are errors, please refer to the actual product.

Keyboard dimensions diagram for VGN S99
Figure 11: Keyboard parameters and dimensions.

7. User Tips

  • Optimal Typing Experience: The keyboard's Gasket leaf spring structure and multi-layer silencing contribute to a softer, purer sound and feel. Experiment with different keycap profiles if you wish to further customize the tactile experience.
  • Customization with VGN HUB: Utilize the VGN HUB software to its full potential. You can remap keys, create macros for gaming or productivity, and fine-tune the RGB lighting to match your setup or mood.
  • Battery Management: With a 6000mAh battery, the S99 offers ultra-long battery life. To maximize battery longevity, consider turning off RGB lighting when not needed or using wired mode for extended periods.
  • Hot-Swappable Advantage: Don't hesitate to experiment with different switch types. The hot-swappable design allows you to easily change switches to find your preferred feel and sound without needing specialized tools or soldering.
  • Multi-Device Connectivity: Take advantage of the tri-mode connection to seamlessly switch between multiple devices (e.g., desktop, laptop, tablet) using the 2.4G receiver or Bluetooth pairing.

8. Warranty and Support

Your VGN S99 Mechanical Keyboard comes with a Warranty Certificate included in the packaging. Please refer to this document for detailed information regarding warranty coverage, terms, and conditions.

For technical support, driver downloads (VGN HUB), or further assistance, please visit the official VGN website or contact your retailer.

Related Documents - S99

Preview VGN S99 Mechanical Keyboard User Manual
User manual for the VGN S99 Mechanical Keyboard, covering button descriptions, quick start guide for 2.4G wireless, Bluetooth, and wired connections, power management, sleep function, FN combination keys, lighting effects, and common troubleshooting tips.
Preview VGN N75 Pro Mechanical Keyboard User Manual
User manual for the VGN N75 Pro Mechanical Keyboard, covering button descriptions, connection modes (2.4G, Bluetooth, Wired), power management, sleep functions, FN key combinations, lighting effects, common troubleshooting, and FCC compliance.
Preview VGN V87 PRO Mechanical Keyboard User Manual
Comprehensive user manual for the VGN V87 PRO mechanical keyboard, detailing connectivity options (2.4GHz wireless, Bluetooth, wired), RGB lighting customization via V HUB software, FN key combinations, power management, and troubleshooting FAQs. Learn how to set up, customize, and maintain your keyboard for an optimal experience.
Preview VGN V98 Pro V2 Mechanical Keyboard User Manual
User manual for the VGN V98 Pro V2 Mechanical Keyboard, detailing FCC compliance, features, and specifications.
Preview DragonFly F1 Pro Max User Manual - VGN
Comprehensive user manual for the VGN DragonFly F1 Pro Max wireless gaming mouse, detailing product information, sales specifications, parameter comparisons, detailed specifications, connectivity, compatibility, sensor details, main control chip, battery, fretting, roller encoder, foot stickers, software support, packaging, and FCC warnings.
Preview VGN NEONULTRA Magnetic Keyboard User Manual and FCC Compliance
Official user manual and FCC compliance information for the VGN NEONULTRA magnetic keyboard, detailing setup, features, and regulatory compliance.