NEEWER GC30C

Contents

NEEWER BASICS GC30C Inflatable LED Fill Light User Manual

Model: GC30C | Brand: NEEWER

1. Important Safety Instructions and Precautions

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • This product is professional lighting equipment and should be used by professional lighting engineers or under their guidance.
  • Keep out of reach of children. Close supervision is necessary when children are near the equipment.
  • This light is not intended for general household illumination. Avoid direct eye exposure to the light source, especially for individuals with eye damage or sensitivity.
  • Do not use the equipment if the lamp beads are damaged or deformed by heat. Contact the manufacturer or qualified personnel for replacement.
  • Do not use damaged equipment or accessories. Ensure all components are in good working order before use.
  • If the product casing is broken due to dropping, squeezing, or strong impact, discontinue use immediately to prevent electric shock from exposed internal components.
  • Do not disassemble or modify the product without authorization. Repairs should only be performed by authorized maintenance personnel.
  • Keep the equipment away from flammable and volatile solvents such as alcohol and gasoline.
  • Use only accessories recommended by the manufacturer to avoid fire, electric shock, or injury.
  • When cleaning, use a dry, soft cloth. Do not use wet cloths or immerse the device in water or other liquids.
  • This equipment is not waterproof. Keep it dry and use it in a dry, well-ventilated area. Avoid use in rainy, humid, dusty, or overheated environments.
  • Do not place any objects on the light or allow liquids to flow into it to prevent accidents.
  • Battery Safety:
    • Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. Replacement should be done by service personnel only.
    • Do not expose the battery to excessive heat (sunlight, fire, etc.), rain, or water.
    • Do not disassemble, hit, crush, or throw the battery into fire. If the battery appears swollen, discontinue use.
    • Ensure adequate heat dissipation during use. Do not place the device on bedding or in enclosed spaces that hinder heat dissipation.

Do not stare at the operating light source.

2. Product Overview and Package Contents

The NEEWER BASICS GC30C is a portable, inflatable LED fill light designed for photography and videography. It features a lightweight, foldable design for easy transport and storage.

2.1. Package Contents

NEEWER GC30C Inflatable LED Fill Light kit contents including light tube, remote, inflator, USB-C cable, and storage bag.
Figure 2.1: NEEWER GC30C Package Contents
  • 1 x Inflatable LED Fill Light (GC30C)
  • 1 x Magnetic Stand
  • 1 x USB C Charging Cable
  • 1 x Inflator
  • 1 x Storage Bag

2.2. Key Features

  • Inflatable Design: Soft TPU light wand that folds compactly for travel and inflates to 35.5"/90cm for use. Weighs only 13.3oz/377g.
  • High Power Output: 30W with up to 3000Lux/0.5m illumination.
  • Versatile Lighting: RGB temperature range from 2700K-6500K, 0%-100% adjustable brightness.
  • Accurate Colors: High CRI rating of 95 for faithful color reproduction.
  • Built-in Battery: 7.2V 5000mAh 36Wh battery provides up to 70 minutes runtime at 100% brightness.
  • Convenient Charging: USB Type-C port supports PD45W input and 30W output for quick recharging.
  • Special Effects: 17 built-in scene effects (e.g., Paparazzi, Defective Bulb, Explosion, Welding, CCT Flicker, CCT Pulse).
  • Intuitive Display: Integrated 0.98" color screen shows all light settings.

3. Setup and Installation

3.1. Inflating the Light Body

The light body is made of TPU and Silicone, designed to be inflated for use and deflated for storage.

  1. Ensure the deflation lid is tightly closed.
  2. Open the inflation lid.
  3. Use the provided inflator to inflate the light body until it is firm.
  4. Close the inflation lid tightly after inflation.
Image showing the inflation process of the NEEWER GC30C light using a standard inflator.
Figure 3.1: Inflating the Light Body

3.2. Attaching the Controller

The controller connects to the light body to provide power and control functions.

  1. Align the male socket on the light body with the female socket on the controller.
  2. Push the controller firmly until the detaching pusher automatically locks it into place.

3.3. Using the Magnetic Stand

The magnetic stand allows for versatile mounting options.

  1. Insert the fixing rod into the groove on the back of the controller.
  2. If using an optional MagSafe Mount, insert it along the groove on the fixing rod, then rotate clockwise to lock it.
  3. Pull the fixing band through the magnetic mount and secure it to the fixing rod for additional stability or suspension.

4. Operating Instructions

4.1. Powering On/Off

Connect the light to a power source (if not using battery) or ensure the battery is charged.

  • To Power On: Press and hold the power switch button.
  • To Power Off: Press and hold the power switch button again until the screen blacks out.

4.2. Mode Selection and Adjustment

The controller features a 0.98" color display and a select dial for navigation and adjustments.

Close-up of the NEEWER GC30C controller display showing scene mode selection with Color Temperature, Effects, and HSI modes.
Figure 4.1: Controller Display and Buttons
  1. Enter Mode Selection: Press the MODE button.
  2. Select Mode: Rotate the select dial to choose between Color Temperature (CCT), Effects (FX), or HSI modes.
  3. Enter Parameter Settings: Press the select dial to enter the chosen mode's settings.
  4. Adjust Parameters: Rotate the select dial upward to increase values, and downward to decrease values (e.g., brightness, color temperature, hue, saturation).
  5. Exit Parameter Settings: Press the MODE button to return to the previous interface.

4.3. CCT Mode (Color Temperature)

In CCT mode, you can adjust the brightness and color temperature.

  • Brightness Adjustment Range: 0% - 100%
  • Color Temperature Range: 2700K - 6500K

4.4. FX Mode (Special Effects)

The GC30C offers 17 special effects to enhance your creative lighting.

  • Examples include Paparazzi, Defective Bulb, Explosion, Welding, CCT Flicker, CCT Pulse.
  • Rotate the select dial to browse through the 17 effects.
  • Press the select dial to enter the specific effect's parameters for adjustment.

4.5. HSI Mode (Hue, Saturation, Intensity)

HSI mode allows for precise control over color.

  • Hue (H) Range: 0° - 359°
  • Saturation (S) Range: 0% - 100%
  • Brightness (L) Range: 0% - 100%

4.6. Charging the Battery

The light features a built-in 7.2V 5000mAh 36Wh battery.

Image showing the USB Type-C charging port with a silicone cover on the NEEWER GC30C light.
Figure 4.2: USB Type-C Charging Port
  • Connect the provided USB Type-C charging cable to the light's USB-C port.
  • Connect the other end to a compatible PD45W power adapter (not included).
  • The battery life is approximately 70 minutes at 100% brightness.
  • Charging time is approximately 130 minutes.
  • A silicone cover protects the charging port. Ensure it is properly sealed when not charging.

5. Specifications

Feature Specification
ModelGC30C
Power30W
Item TypeInflatable LED Fill Light
Dimensions Before Inflation35.4''x4.7'' / 90x12cm
Type C InputDC5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A
Type C Output30W
Battery Capacity7.2V 5000mAh 36Wh
CRI95
Weight13.3oz / 377g
Color Temperature2700K-6500K
Max Illumination3000LUX/0.5m
Special Effects17 types
Hue (H) Range0° - 359°
Saturation (S) Range0% - 100%
Brightness (L) Range0% - 100%
Runtime (100% Brightness)70 minutes

6. Maintenance

  • Cleaning: Use a dry, soft cloth to wipe the light body and controller. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, deflate the light body and fold it compactly. Secure it with the silicone ring and store it in the provided storage bag. Store in a dry, cool place away from direct sunlight and extreme temperatures.
  • Battery Care: For long-term storage, charge the battery to approximately 50-60% every three months to prolong its lifespan.
  • Port Protection: Always ensure the USB-C charging port's silicone cover is properly sealed when not in use to prevent dust and moisture ingress.

6.1. Light Body Storage Instructions

  1. Deflate the light body by opening the deflation lid and allowing air to escape. Close the lid tightly once deflated.
  2. Fold the light body in half.
  3. Roll up the light body starting from the male socket end.
  4. Tie it up with the silicone ring to keep it compact.

7. Troubleshooting

Problem Possible Cause Solution
Light does not turn on Low battery; Power button not held long enough; Controller not properly connected. Charge the battery; Press and hold the power button for a few seconds; Ensure controller is securely attached to the light body.
Light not inflating properly Inflation lid not open; Deflation lid not closed; Inflator not used correctly. Ensure inflation lid is open and deflation lid is closed; Use the provided inflator as per instructions.
Cannot adjust settings Incorrect mode selected; Select dial not pressed/rotated correctly. Press MODE button to navigate modes; Press the select dial to enter parameter adjustment, then rotate.
Short battery life Battery not fully charged; Operating at 100% brightness for extended periods. Ensure battery is fully charged; Reduce brightness for longer runtime.

8. User Tips

  • For outdoor shoots, the lightweight and inflatable design makes it easy to carry and set up in various locations.
  • Experiment with the 17 special effects to add creative flair to your videos and photos.
  • Utilize the magnetic stand for quick and flexible mounting on metallic surfaces or for suspension.
  • Keep the light deflated and stored in its bag when not in use to protect the TPU material and prolong its lifespan.

9. Warranty and Support

This product comes with a standard warranty. Please retain your proof of purchase for warranty claims.

  • Warranty Period: The warranty period for the product and its components is based on the date of first purchase.
  • Obtaining Service: For maintenance service, please contact your product distributor or authorized service institutions. You may also contact NEEWER customer support.
  • Inapplicable Cases: The warranty does not cover damages caused by improper usage, unauthorized repairs, modifications, accidents, or use of non-standard accessories. Normal wear and tear, discoloration, and consumption are also not covered.

For the most up-to-date warranty information and support, please refer to the official NEEWER website or contact their customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.