AUXBEAM AS-R40 4-Gang RGB Slim Switch Panel

1. Introduction

The AUXBEAM AS-R40 is a universal 4-gang RGB Slim Switch Panel designed for controlling various vehicle accessories and lighting. It features RGB backlighting, three distinct operating modes (Toggle, Momentary, Pulsed), and a user-friendly design for easy installation and customization. This manual provides detailed instructions for setting up, operating, and maintaining your AS-R40 switch panel.

Figure 1: AUXBEAM AS-R40 4-Gang RGB Slim Switch Panel Overview

2. Specifications

Product Features:

• LED Indicators: Lights up to show when the circuit is active.
• Automatic Light Sensor: Adjusts backlight brightness based on ambient light.
• On/Off Button Indicator: Provides visual feedback for switch status.
• Memory Function: Retains previous settings.
• MODE Button Indicator: Shows the currently selected operating mode.
• Backlight Control: Option to manually turn off the backlight.

Figure 2: Product Features and Dimensions

3. What's Included

The package includes the following components:

• 1 x AS-R40 Switch Panel
• 1 x Circuit Control Box
• 1 x 60A Circuit Breaker
• 60 pcs Labels (for switch customization)
• Mounting Brackets (2 types)
• AS-R40 Installation Kit
• 10ft Wire Harness
• Power Harness, Fuse Wire & Adapter
• Panel Waterproof Cover
• AS-R40 Package Box

Figure 3: Package Contents

4. Setup & Installation

The AS-R40 switch panel is designed for easy, plug-and-play installation without requiring large cuts in your vehicle. Follow these steps for proper setup:

4.1 Mounting the Switch Panel

Choose an optimal location for your switch panel, such as the dash panel, center console, or overhead sunglasses holder. The kit includes two types of mounting brackets to accommodate different installation preferences.

Figure 4: Two Installation Methods Available

4.2 Wiring Instructions

Connect the switch panel to the circuit control box, and then connect the control box to your vehicle's power source and the accessories you wish to control. Ensure all connections are secure.

1. Connect the main power wires (red for positive, black for negative) from the circuit control box to your vehicle's battery terminals.
2. Install the 60A circuit breaker (C) between the positive battery terminal and the circuit control box for overcurrent protection.
3. Connect the 10ft wire harness (G) from the switch panel to the circuit control box.
4. Connect the outgoing wires from the circuit control box to your desired LED lights or other equipment. Each output is fused for protection.
5. Utilize the provided 3.94ft or 20ft extension cables if additional reach is needed for the switch panel or accessories. These cables feature thick hard wire for superior protection against EMI and RF interference.
6. The 7ft electric wire (10㎡/7AWG red and black large wire with tinned copper wire lugs) is for robust power connections.

Figure 5: Wiring Diagram for Controlling Equipment

5. Operation

The AS-R40 switch panel offers versatile control over your vehicle's accessories with customizable backlighting and multiple operating modes.

5.1 Switch Modes

Each of the four switches can be configured to one of three operating modes:

• Toggle (RED indicator): Provides a constant light mode. Press once to turn on, press again to turn off. Ideal for fog lights or driving lights.
• Momentary (BLUE indicator): Activates the circuit only while the button is pressed and held. Releases to turn off. Suitable for applications like a horn.
• Pulsed (GREEN indicator): Initiates a flash mode. Press once to start continuous flashing (on/off cycle), press again to stop. Useful for strobe lights.

Figure 6: RGB Backlights and Lighting Modes

5.2 Backlight Control

The AS-R40 features RGB backlighting that can be adjusted to match your vehicle's interior ambiance.

• Automatic Brightness Sensing: The panel automatically adjusts backlight brightness based on the surrounding environment's light levels.
• Manual Backlight ON/OFF Control: You can manually turn off the backlight when it's not needed, for example, during daytime driving.

Figure 7: Backlight Brightness Adjustment

5.3 Customization

Use the provided 60 universal stickers to label each switch according to the connected device. This allows for clear identification and intuitive control of your accessories.

6. Maintenance

To ensure the longevity and optimal performance of your AUXBEAM AS-R40 switch panel, follow these maintenance guidelines:

• Waterproof Protection: The panel has an IP65 waterproof rating. For added protection, especially in harsh weather conditions, utilize the included panel waterproof cover.
• Cleaning: Clean the switch panel and circuit control box regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the surface or electronics.
• Inspection: Periodically inspect all wiring connections for any signs of wear, corrosion, or looseness. Ensure the 60A circuit breaker is in good condition.

7. Troubleshooting

If you encounter issues with your AS-R40 switch panel, refer to the following common troubleshooting steps:

• No Power to Panel:
  • Check the 60A circuit breaker (C) to ensure it has not tripped. Reset if necessary.
  • Verify that the main power connections (positive and negative) from the circuit control box (B) to the vehicle battery are secure and free of corrosion.
  • Ensure the wire harness connecting the switch panel to the circuit control box is firmly plugged in.
• Connected Device Not Responding:
  • Observe the LED indicator on the specific switch. If it's not lit, the circuit may not be active.
  • Confirm the wiring from the circuit control box (B) to the connected device is correct and secure.
  • Test the connected device independently to ensure it is functioning correctly.
• Backlight Issues:
  • If automatic dimming is not working, check for obstructions to the light sensor or extreme ambient light conditions.
  • If manual backlight control is unresponsive, ensure the 'MODE' button is not stuck and is functioning correctly.

8. User Tips

Maximize your experience with the AUXBEAM AS-R40 switch panel with these helpful tips:

• Effective Labeling: Use the 60 provided labels to clearly mark each switch's function. This enhances safety and ease of use, especially when operating multiple accessories.
• Optimal Mounting: Experiment with the two types of mounting brackets to find the most accessible and ergonomic location for the switch panel in your vehicle, whether on the dash, center console, or overhead.
• Mastering Modes: Familiarize yourself with the Toggle, Momentary, and Pulsed modes. Assigning the correct mode to each accessory (e.g., Momentary for a horn, Toggle for constant lights) will improve functionality and user experience.
• Backlight Customization: Adjust the RGB backlight colors to complement your vehicle's interior lighting. Utilize the manual backlight off feature to minimize distractions during night driving when backlighting is not desired.

9. Warranty & Support

The AUXBEAM AS-R40 switch panel is manufactured to high-quality standards. For product support, technical assistance, or any inquiries regarding your device, please contact AUXBEAM customer service. Refer to the product packaging or the official AUXBEAM website for detailed warranty information and contact methods.