1. Product Overview
The Deye LSE-3 LAN Data Collector is an Ethernet-based communication stick designed to integrate with Deye inverters. It facilitates the collection of operational and power generation data, enabling remote photovoltaic (PV) system monitoring and efficient management through the Solarman professional platform. This device ensures reliable data transmission and simplifies the monitoring process for solar energy systems.
2. Safety Information
- Ensure the device is installed by qualified personnel.
- Do not expose the device to extreme temperatures, moisture, or direct sunlight.
- Verify input voltage (DC 5V-15V) before connecting to avoid damage.
- Keep out of reach of children.
- Dispose of the device responsibly according to local electronic waste regulations.
3. Package Contents
Upon opening the package, verify that all items are present and undamaged:
- Deye LSE-3 LAN Data Collector
- Installation accessories (e.g., mounting bracket, screws, pry tool if included)
- This User Manual
4. Setup Instructions
- Physical Installation:
- Locate the communication port on your Deye inverter.
- Carefully align the LSE-3 LAN Data Collector's connector with the inverter's port.
- Gently push and secure the data collector into place. Ensure a firm connection.
Figure 3: LSE-3 LAN Data Collector connected to the inverter. - Power Connection: The device draws power directly from the inverter. Ensure the inverter is powered on. The LSE-3 requires DC 5V-15V input at 1W.
- Network Connection: Connect an Ethernet cable from your router or network switch to the LAN port on the LSE-3 data collector.
- Software Setup (Solarman App):
- Download the 'Solarman' application from your device's app store (iOS/Android).
- Register an account or log in if you already have one.
- Follow the in-app instructions to add your new data collector. You will need the unique series number (SN) found on the device label.
Figure 4: Product label with Model LSE-3, Input Voltage, and Serial Number (SN). - Initial Configuration (Web Interface): The LSE-3 supports web-based user configuration. Once connected to the network, you may access its web interface via its IP address for advanced settings. Refer to the Solarman documentation for detailed steps on accessing and configuring the device via web.
5. Operating Instructions
Once the LSE-3 LAN Data Collector is successfully set up and connected, it will automatically begin collecting data from your Deye inverter and transmitting it to the Solarman platform.
- Monitoring: Use the Solarman app or web portal to monitor your PV system's real-time operation, power generation, and historical data.
- LED Indicators: Observe the LED indicators on the front of the device for status updates:
- NET: Indicates network connection status.
- COM: Indicates communication status with the inverter.
- READY: Indicates the device is operational and ready for data transmission.
- Remote Control: The Solarman platform allows for remote PV system monitoring and management, enabling efficient distributed power station management.
6. Maintenance
- Cleaning: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
- Firmware Upgrades: The LSE-3 supports remote firmware upgrades. Ensure your device is connected to the internet to receive automatic updates that improve performance and add new features.
- Environmental Conditions: Ensure the device operates within its specified temperature and humidity ranges to ensure longevity and optimal performance.
7. Troubleshooting
- No Power/LEDs Off:
- Ensure the LSE-3 is correctly inserted into the inverter's communication port.
- Verify the inverter is powered on and supplying the correct voltage (DC 5V-15V).
- NET LED Not Lit/Flashing Incorrectly:
- Check the Ethernet cable connection to both the LSE-3 and your router/switch.
- Verify your network is active and providing internet access.
- Restart your router/switch.
- COM LED Not Lit/Flashing Incorrectly:
- Ensure the LSE-3 is securely connected to the inverter.
- Check the inverter's status to ensure it is operating correctly.
- No Data on Solarman App:
- Confirm all LEDs (NET, COM, READY) are indicating normal operation.
- Verify the LSE-3's serial number is correctly registered in the Solarman app.
- Check your internet connection.
- Device Not Recognized by Solarman App:
- Double-check the serial number entered during registration.
- Ensure the device has a stable internet connection.
- Try restarting the Solarman app or reinstalling it.
8. Specifications
| Feature | Specification (LSE-3) |
|---|---|
| Product Name | Stick Logger (Ethernet) |
| Model | LSE-3 |
| Remote Communication Interface | LAN |
| Data Interface | RS485/RS232/TTL |
| Working Voltage | DC 4.7V - DC 15V |
| Working Power | 1W |
| Working Temperature | -40°C to 85°C |
| Working Humidity | <90% (Non-Condensing) |
| No. of Connections | One |
| Serial Communication Rate | bps (1200-115200bps Configurable) |
| Data Acquisition Interval | Default 5min (1min Configurable) |
| User Configuration | Web |
| Firmware Upgrade | Remote Upgrade |
| Dimensions (L x W x H) | 40mm x 30mm x 10mm (approximate package dimensions) |
| Weight | 6.0 kg (approximate package weight) |
9. Warranty and Support
The Deye LSE-3 LAN Data Collector is manufactured by IGEN Tech Co., Ltd. For technical support, warranty claims, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt and the device's serial number handy for faster service.
10. User Tips
- Stable Network: Ensure a stable and reliable Ethernet connection for uninterrupted data transmission.
- Regular Monitoring: Periodically check the Solarman app to ensure data is being collected and transmitted correctly.
- Firmware Updates: Allow for remote firmware updates to ensure your device benefits from the latest features and security enhancements.