1. Introduction
Thank you for choosing the X10 TWS Wireless Headphones. These earbuds are designed to provide a high-fidelity audio experience with the convenience of wireless connectivity, intelligent touch controls, and a durable waterproof design. This manual will guide you through the setup, operation, and maintenance of your new headphones.

2. Package Contents
Please check the box for the following items:
- 2 x X10 TWS Earphones
- 1 x Charging Case (3500mAh)
- 1 x USB Type-C Cable
- 1 x User Manual
- 3 x Earphone Caps (S, M, L Sizes)

3. Specifications
| Feature | Specification |
|---|---|
| Communication | Wireless (Bluetooth) |
| Bluetooth Version | 5.0 |
| Wireless Type | Bluetooth |
| Material | Plastic |
| Earcups Type | Open-back |
| Driver Diameter | 10mm |
| Number Of Drivers | 2 |
| Vocalism Principle | Dynamic |
| Sensitivity | 120dB |
| Impedance Range | up to 32 Ω |
| Max Output | 1mW |
| Total Harmonic Distortion | 1% |
| Codecs | AAC |
| Charging Method | Charging case (Type-C) |
| Headphone Pads Material | Silicone |
| Magnet Type | Neodymium |
| Waterproof Rating | IPX7 |
| Features | With Microphone, Active Noise-Cancellation, Volume Control, Control Button, Sound Isolating |
| Battery Capacity (Charging Case) | 3500mAh |
| Music Time | Up to 60 hours (with charging case) |
4. Setup
4.1 Initial Charging
Before first use, ensure both the earbuds and the charging case are fully charged.
- Place the earbuds into the charging case.
- Connect the USB Type-C cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port).
- The LED digital display on the charging case will show the battery percentage. Allow it to charge until it reaches 100%.
4.2 Pairing with a Device
The X10 TWS headphones feature automatic pairing for convenience.
- First-time Pairing: Open the charging case and take out both earbuds. They will automatically power on and enter pairing mode.
- On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
- Search for available devices and select "X10 TWS" (or similar name) from the list.
- Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
- Subsequent Pairing: After the initial pairing, the earbuds will automatically connect to the last paired device when taken out of the charging case.
4.3 Single/Dual Earbud Mode
You can use both earbuds together for stereo sound or a single earbud independently.
- Dual Mode: Take both earbuds out of the case. They will automatically connect to each other and then to your device.
- Single Mode: Take only one earbud out of the case. It will connect to your device and function independently. The other earbud can remain in the case or be used later.
5. Operating Instructions
The X10 TWS headphones feature intelligent touch controls on each earbud.

5.1 Music Playback
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Volume Up: Triple tap on the right earbud.
- Volume Down: Triple tap on the left earbud.
5.2 Call Management
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud for 2 seconds.
5.3 Voice Assistant
- Activate Voice Assistant: Press and hold either earbud for 3 seconds.
5.4 Power On/Off
- Power On: Earbuds automatically power on when removed from the charging case. Alternatively, press and hold the touch area for 3-5 seconds.
- Power Off: Earbuds automatically power off when placed back into the charging case. Alternatively, press and hold the touch area for 5-7 seconds.
6. Maintenance
6.1 Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear tips and clean any earwax or debris from the earbud nozzles using a small brush or cotton swab.
- Ensure charging contacts on both earbuds and case are clean and dry.
6.2 Waterproofing (IPX7)
The X10 TWS headphones are rated IPX7 waterproof. This means they can withstand immersion in water up to 1 meter for 30 minutes. They are resistant to sweat, daily rain, and dust.

Important:
- Do not intentionally submerge the charging case, as it is not waterproof.
- Ensure earbuds are completely dry before placing them back into the charging case to prevent damage.
- Avoid exposure to hot water, steam, or extreme temperatures.
6.3 Storage
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing with device |
|
| Only one earbud working |
|
| Earbuds not charging |
|
| Poor sound quality/intermittent connection |
|
8. User Tips
- Touch Control: The X10 TWS headphones utilize touch controls for all functions, not physical buttons. Familiarize yourself with the tap patterns for music, calls, and voice assistant.
- Ear Tip Selection: Experiment with the included S, M, and L ear caps to find the best fit for your ears. A proper seal enhances sound quality and comfort.
- Battery Management: The 3500mAh charging case provides extended battery life. Keep the case charged to ensure your earbuds are always ready for use. The LED display on the case shows the current battery level.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.