1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NEWBOLER GPS Odometer Cycling Bike Computer. Please read this manual carefully before use to ensure optimal performance and longevity of your device.
2. Safety Information
- Ensure the device is securely mounted before riding to prevent detachment and potential damage or injury.
- Do not attempt to disassemble or modify the device, as this will void the warranty and may cause malfunction.
- Keep the device away from extreme temperatures and direct sunlight for prolonged periods.
- While the device is daily life waterproof, avoid prolonged immersion in water.
- Always prioritize road safety. Do not operate the device in a way that distracts you from riding.
3. Package Contents
Please check the package for the following items:
- NEWBOLER GPS Odometer Cycling Bike Computer
- Standard Bracket (with rubber rings)
- USB Type-C Charging Cable
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Product Name | GPS Cycling Code Table |
| Weight (single gauge) | 77.2 g |
| Material | PC+ABS |
| Charging Interface Type | Type-C |
| Backlight | Manual backlight / Can be on continuously |
| Battery Capacity | 1200mAh |
| Working Time | About 28 hours |
| Display Size | About 2.4 inches |
| Positioning Systems | Beidou, GPS, GLONASS, Galileo, QZSS (Five-star positioning) |
| External Devices | None required (GPS function does not require sensor connection) |
| Touch Screen | No |
| Navigation | No |
| Origin | Mainland China |
5. Setup and Installation
5.1. Mounting the Device
The NEWBOLER GPS Odometer supports various mounting options. Below are instructions for common bracket types.
5.1.1. Standard Bracket Installation
- Place the rubber rings around the handlebar stem.
- Position the bracket base over the rubber rings.
- Secure the bracket base by fixing the four corners of the rubber ring.
- Align the GPS Odometer with the buckle on the bracket and rotate to lock it in place.
5.1.2. Round Handle Extension Bracket Installation (Bracket needs to be prepared by oneself)
- Put the gasket onto the round handle extension bracket.
- Install the bracket onto the handlebar.
- Tighten the screws to secure the bracket.
- Align the GPS Odometer with the buckle on the bracket and rotate to lock it in place.
5.1.3. Carbon Fiber Integrated Handlebar Bracket Installation (Bracket needs to be prepared by oneself)
- Assemble the bracket components.
- Tighten the screws to secure the bracket assembly.
- Remove the stand screw from your handlebar.
- Install the carbon fiber integrated bracket onto the handlebar.
- Tighten the screw to secure the bracket.
- Align the GPS Odometer with the buckle on the bracket and rotate to lock it in place.
5.2. Initial Power On and Satellite Acquisition
After mounting, power on the device. The satellite icon will flash, indicating it is searching for satellites. For normal function, ensure you are in an open outdoor area to allow the device to acquire satellite signals successfully. Once acquired, the satellite icon will become stationary.
6. Operating Instructions
6.1. Power On/Off
Press and hold the power button (usually the top left button) for 2 seconds to turn the device on or off.
6.2. Navigating Display Modes
The device displays various cycling data. Use the arrow keys to switch between different data views:
- Up Arrow Key (▲): Press to view sequentially: Total Distance, Total Time, Current Time, Clock, Calories.
- Down Arrow Key (▼): Press to view sequentially: Current Speed, Maximum Speed, Average Speed.
6.3. Backlight Control
The device supports manual backlight control:
- Long press the left up key (▲) for 3 seconds to turn the backlight on or off.
- The backlight can be set to be always on.
6.4. Automatic Shutdown
The device features an automatic shutdown function. If stationary for 20 minutes, it will automatically turn off to conserve battery life.
6.5. Clock Satellite Calibration
The device supports clock satellite calibration, ensuring accurate time display once satellite signals are acquired.
7. Charging
The NEWBOLER GPS Odometer is equipped with a Type-C charging port for fast and convenient charging. Connect the provided USB Type-C cable to the device and a suitable power source (e.g., USB wall adapter, computer USB port).
A full charge provides approximately 28 hours of working time.
8. Maintenance
8.1. Cleaning
Wipe the device with a soft, damp cloth to remove dirt and dust. Avoid using harsh chemicals or abrasive materials that could damage the screen or casing.
8.2. Waterproofing
The device offers daily life waterproofing. This means it can withstand splashes and light rain. However, it is not 100% waterproof. Please do not soak the device in water or expose it to heavy rain for prolonged periods, as this may cause damage.
9. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Device does not power on. | Battery may be depleted. Charge the device using the Type-C cable. Ensure the power button is pressed and held for 2 seconds. |
| No GPS signal / Satellite icon flashing. | The device is searching for satellites. Move to an open outdoor area with a clear view of the sky. Signal acquisition may take a few minutes. |
| Display is blank or unresponsive. | The device might have entered automatic shutdown mode due to inactivity. Press the power button to reactivate. If unresponsive, try charging. |
| Backlight not working. | Long press the left up key (▲) for 3 seconds to toggle the backlight. Check battery level. |
10. User Tips
- For best GPS performance, always start your ride in an open area to allow quick satellite acquisition.
- Regularly check the battery level, especially before long rides, to ensure continuous tracking.
- Keep the screen clean for optimal visibility of your ride data.
11. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact customer service through your purchase platform. Keep your proof of purchase for any warranty claims.