1. Introduction
The ATOMSTACK P15W is a mini portable laser engraving machine designed for both beginners and experienced users. It combines a 5W diode laser and a 1.2W infrared laser, offering versatile engraving and cutting capabilities on a wide range of materials. Its compact design, ease of use, and advanced safety features make it an ideal tool for creative projects and small-scale production.
This manual provides essential information for the safe and effective operation of your ATOMSTACK P15W. Please read it thoroughly before using the device.
2. Safety Information
WARNING: Laser radiation can cause eye damage and skin burns. Always follow safety precautions.
- The ATOMSTACK P15W is designed with FDA/Class 1 laser safety standards and features a 720° fully enclosed structure for enhanced protection.
- Never look directly into the laser beam or at its reflection.
- Ensure the engraving area is well-ventilated. Consider using an external air purifier, such as the ATOMSTACK D3 Air Purifier (sold separately), to maintain air quality and achieve a 99.97% purification rate.
- Keep the device away from children and pets.
- Do not operate the machine if any part is damaged or malfunctioning.
- Always wear appropriate laser safety goggles when operating the machine, especially during maintenance or when the enclosure is open.
3. Package Contents
Please check the contents of your package upon arrival. While specific accessories may vary, a typical package includes:
- ATOMSTACK P15W Laser Engraving Machine
- Power Adapter
- USB Cable
- Sample Materials for testing
- User Manual (this document)
- Safety Goggles
Note: Optional accessories such as the ATOMSTACK D3 Air Purifier, Rotary Roller R6, or Rotary Chuck R8 are sold separately.
4. Setup
Follow these steps for initial setup:
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Placement: Place the ATOMSTACK P15W on a stable, level surface in a well-ventilated area. Ensure there is sufficient space around the machine for operation and heat dissipation.
- Power Connection: Connect the power adapter to the machine and then to a suitable power outlet.
- Software Installation: Download and install the AtomStack Studio software on your computer (Windows, MacOS) or mobile device (Android, iOS). The software can be found on the official ATOMSTACK website or app stores.
- Connection: Connect the machine to your computer via USB cable or establish a Bluetooth connection with your mobile device. Follow the on-screen instructions in the AtomStack Studio software to pair your device.
- First Use: Before starting any project, perform a small test engraving on a sample material to familiarize yourself with the machine's operation and software settings.
5. Operating Instructions
The ATOMSTACK P15W supports engraving and cutting on over 200 types of materials, utilizing both a 5W diode laser and a 1.2W infrared laser.
5.1 Material Compatibility
The P15W features a dual-laser system for broad material compatibility:
- 5W Diode Laser: Suitable for materials such as wood, bamboo, paper, leather, cardboard, cork, stone, felt, fabric, MDF, coated metal, and some dark opaque acrylics.
- 1.2W Infrared Laser: Ideal for engraving on stainless steel, aluminum, brass, iron, gold, silver, platinum, titanium, black acrylic, and various plastics.
5.2 Engraving and Cutting Process
- Design Preparation: Create or import your design into the AtomStack Studio software. The software allows for easy editing and positioning of your artwork.
- Material Placement: Place your material securely within the engraving area (100x100mm). Ensure it is flat and properly aligned.
- Focus Adjustment: Follow the software's instructions to adjust the laser focus for optimal engraving/cutting results. Proper focus is crucial for precision.
- Parameter Settings: Select the appropriate laser power, speed, and passes based on your material and desired effect. Refer to the software's material library or perform test engravings.
- Start Engraving/Cutting: Initiate the process from the AtomStack Studio software. The machine can engrave a piece in approximately 3-5 minutes, depending on complexity.
- Monitoring: Monitor the process through the visible window. If any issues arise, use the emergency stop button.
5.3 Using Rotary Accessories
For engraving cylindrical objects, optional rotary accessories like the AtomStack Rotary Roller R6 or Rotary Chuck R8 can be used. Refer to the specific manual for these accessories for installation and operation instructions.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your ATOMSTACK P15W.
- Cleaning the Lens: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to ensure clear laser output.
- Cleaning the Engraving Area: Remove debris and dust from the engraving platform and interior of the machine after each use. A soft brush or compressed air can be used.
- Air Purifier Maintenance: If using an ATOMSTACK D3 Air Purifier, follow its specific maintenance instructions for filter replacement to maintain air quality.
- Firmware Updates: Check the AtomStack official website or software for any available firmware updates to ensure your machine has the latest features and improvements.
7. Troubleshooting
If you encounter issues with your ATOMSTACK P15W, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Laser not firing or weak output | Incorrect focus, dirty lens, incorrect power settings, material incompatibility. | Adjust focus, clean lens, verify power settings in software, ensure material is compatible with selected laser. |
| Machine not connecting to software | Loose USB cable, Bluetooth not paired, software driver issue. | Check USB connection, re-pair Bluetooth, restart software/computer, reinstall drivers if necessary. |
| Engraving results are inconsistent or blurry | Material not flat, incorrect focus, machine vibration, dirty lens. | Ensure material is flat and secure, re-adjust focus, place machine on a stable surface, clean lens. |
| Machine stops mid-operation | Overheating, software crash, power interruption. | Allow machine to cool, restart software, check power supply. |
If the problem persists, please contact ATOMSTACK customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | ATOMSTACK |
| Model | P15W (also referred to as P1 5W) |
| Engraving Area | 100 x 100 mm |
| Laser Power | 5W Diode Laser + 1.2W Infrared Laser |
| Cutting Capability | Up to 3mm balsa plywood in one pass |
| Connectivity | Bluetooth, USB |
| Software | AtomStack Studio (Windows, MacOS, Android, iOS) |
| Certifications | CE, FDA/Class 1 Laser Safety |
| Dimensions (L x W x H) | 265mm (10.43") x 303mm (11.93") x 185mm (7.28") |
| Weight | Approx. 3 kg (6.7 lbs) |
| Smart Device | Yes |
9. User Tips
- For best results, always ensure your material is completely flat and secured to prevent movement during engraving.
- Experiment with different power and speed settings on scrap materials to find the optimal parameters for your specific project and material type.
- Regularly clean the laser lens and the machine's interior to maintain engraving quality and prevent dust buildup.
- Utilize the AtomStack Studio mobile app for quick and convenient control, especially for simpler projects.
- When engraving materials that produce significant smoke or fumes, ensure adequate ventilation or use an air purifier to protect your health and the machine.
10. Warranty and Support
ATOMSTACK products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official ATOMSTACK website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
