iKF Ultra

iKF Ultra Wireless Bluetooth Earphone User Manual

Model: Ultra

1. Introduction

The iKF Ultra Wireless Bluetooth Earphones are designed to deliver a premium audio experience with advanced features. These TWS in-ear headphones boast hybrid balanced armature and dynamic drivers for high-fidelity sound, -56dB active noise cancellation, and bilateral six-microphone environmental noise cancellation for crystal-clear calls. With Bluetooth V5.4, low latency gaming mode, and a long-lasting battery, the iKF Ultra provides seamless connectivity and immersive listening for various activities.

2. Setup

2.1 Charging the Earphones and Case

Before first use, fully charge the iKF Ultra earphones and charging case.

  • Place the earbuds into the charging case.
  • Connect the charging case to a power source using the provided Type-C cable.
  • The indicator light on the case will show charging status.

Charging Specifications:

  • Charging Time: Approximately 1.5 hours
  • Charging Bin Battery Capacity: 400mAh
iKF Ultra charging case connected via Type-C cable
The iKF Ultra charging case with a Type-C charging cable connected, indicating the charging port and battery life.

2.2 Pairing with Your Device

The iKF Ultra earphones support instant pairing and dual device connection.

  1. Ensure the earbuds are charged and placed inside the charging case.
  2. Open the lid of the charging case. The earbuds will automatically enter pairing mode.
  3. On your device (smartphone, tablet, computer), go to Bluetooth settings and select "iKF Ultra" from the list of available devices.
  4. Once connected, a voice prompt will confirm successful pairing.

To disconnect, simply place the earbuds back into the case and close the lid. The iKF intelligent quick connection technology simplifies the pairing process efficiently.

iKF Ultra earbuds in their open charging case, illustrating instant pairing
Earbuds in the open charging case, ready for instant pairing with a device.

2.3 Wearing the Earbuds

The iKF Ultra features an ergonomic design for a comfortable and secure fit.

  • Gently insert each earbud into your ear canal.
  • Adjust the earbud until it feels snug and comfortable. A proper fit is crucial for optimal sound quality and noise cancellation performance.
  • The design is based on extensive research by IKF Acoustic Studio to ensure an excellent fit for long-term wear without fatigue.
Close-up of an iKF Ultra earbud properly seated in a person's ear
An iKF Ultra earbud worn in the ear, demonstrating its ergonomic fit.

3. Operating Instructions

3.1 Noise Cancellation (ANC) Modes

The iKF Ultra features -56dB advanced intelligent ANC noise reduction with adjustable modes.

  • ANC ON: Effectively suppresses complex environmental noise across the full frequency range, immersing you in a tranquil space.
  • Transparency Mode: Allows you to hear your surroundings while still enjoying your audio, useful for awareness in urban environments.
  • Normal Mode: Standard audio experience without active noise cancellation.

You can select from three levels of noise reduction depth: Mild, Uniform, and Severe, to suit various scenarios.

Diagram showing ANC modes: ANC ON, Transparency, Normal, with Mild, Uniform, Severe settings
Illustration of the dual-mode intelligent noise reduction settings available on the iKF Ultra.

3.2 Call Noise Reduction (ENC)

The earphones are equipped with bilateral six-microphone ENC for precise call noise reduction.

  • Multiple microphones (feedforward, feedback, and call microphones) work together to capture sound and detect voice input.
  • Multi-channel microphone call noise reduction algorithms efficiently eliminate reverberation noise in real-time.
  • This ensures clear voice communication, even in noisy environments, providing a high-quality call experience comparable to face-to-face conversations.
Diagram showing the location of feedforward, feedback, and call microphones on the iKF Ultra earbud
Detailed view of the microphone placement for bilateral six-mic ENC call noise reduction.

3.3 Low Latency Gaming Mode

Activate the 35ms low latency gaming mode for a synchronized audio-visual experience during gameplay.

  • This mode reduces audio delay, ensuring that sound effects and dialogue are perfectly in sync with on-screen action.
  • It allows for full immersion in the gaming battlefield, helping you stay ahead.
Smartphone screen showing a game with '35ms low latency gaming mode' text overlay
Visual representation of the 35ms low latency gaming mode in action.

3.4 iKF APP Intelligent Connection Interaction

Enhance your experience with the iKF self-developed APP, offering personalized functions.

  • Find Headphones: Locate misplaced earbuds.
  • Private Alarm Clock: Set alarms directly through the earbuds.
  • Custom EQ: Adjust sound profiles to your preference.
  • DIY Touch Control: Customize touch gestures for various functions.
Smartphone screen displaying the iKF app interface with earbud controls
The iKF app interface showing various personalized functions and controls.

4. Maintenance

4.1 Cleaning

  • Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
  • Avoid using abrasive materials, alcohol, or chemical cleaners.
  • Ensure charging contacts and ear tips are free from debris to maintain optimal performance.

4.2 Storage

  • Always store the earbuds in their charging case when not in use to protect them and maintain battery life.
  • Store in a cool, dry place away from extreme temperatures and direct sunlight.

4.3 Water Resistance

The iKF Ultra earphones are rated IPX5 for dust and water resistance.

  • This means they are protected against low-pressure water jets from any direction.
  • They are suitable for sports and outdoor activities, but are not designed for submersion in water.
  • Ensure the charging port is dry before charging.
Summary of iKF Ultra features including IPX5 dust and water resistance
Key features of the iKF Ultra, highlighting IPX5 dust and water resistance.

5. Troubleshooting

5.1 Pairing Issues

  • Earbuds not connecting: Ensure both earbuds are charged and placed in the charging case. Open the lid to initiate pairing.
  • Not appearing in Bluetooth list: Turn off and on your device's Bluetooth. Try resetting the earbuds by placing them in the case, closing the lid for 10 seconds, then reopening.
  • Connection drops frequently: Ensure no obstructions between earbuds and device. Keep within Bluetooth range (typically 10 meters).

5.2 Sound Quality Issues

  • Low volume or poor sound: Check earbud fit and try different sized ear tips for a better seal. Ensure earbuds are clean and free of earwax.
  • Distorted audio: Check the audio source. If using LDAC, ensure your device supports it and the connection is stable.
  • ANC not effective: Ensure earbuds are properly seated. Adjust ANC levels via the app or touch controls.

5.3 Battery Life Concerns

  • Shorter than expected battery life: Ensure earbuds and case are fully charged. High volume levels and continuous ANC use can reduce battery life.
  • Earbuds not charging: Clean the charging contacts on both the earbuds and the case. Ensure the charging cable is securely connected.

6. Specifications

FeatureSpecification
ModeliKF-Ultra
Brand NameAEVYVKV
Product Color MatchingTitanium metal
Bluetooth VersionBluetooth V5.4
Charging PortType-C
Playing Time (Single Ear)Approximately 6 hours
Total Battery Life (with case)Up to 32 hours
Charging TimeApproximately 1.5 hours
Charging Bin Battery Capacity400mAh
Audio Decoding SupportAAC/SBC/LDAC
MaterialPlastic
Active Noise-CancellationYes (-56dB)
Call Noise ReductionBilateral Six-Mic ENC
Volume ControlYes
Vocalism PrincipleDynamic
CommunicationWireless
StyleTWS In-ear Headphones
CertificationCE
OriginMainland China
Low Latency Mode35ms
Sensitivity121dB±2dB
DriverHybrid Balanced Armature and Dynamic Unit (10mm PU + Titanium Membrane)
Water ResistanceIPX5
Product Parameters table for iKF Ultra
Official product parameters for the iKF Ultra earphones.

7. User Tips

  • For optimal sound quality and noise cancellation, experiment with the included ear tip sizes to find the best seal for your ears. A snug fit significantly improves performance.
  • Download the iKF APP to unlock the full potential of your earphones, including custom equalizer settings and personalized touch controls.
  • Utilize the smart dual connection technology to seamlessly switch between two paired devices, such as your phone and laptop, without needing to re-pair.
  • When making calls in noisy environments, ensure the earbuds are properly positioned to maximize the effectiveness of the six-microphone ENC system.

8. Warranty and Support

For detailed warranty information, technical support, and customer service inquiries, please refer to the official iKF website or contact the seller directly. Keep your proof of purchase for any warranty claims.

Related Documents - Ultra

PreviewiKF-T3 Wireless Earbuds User Manual and FCC Compliance Information
User manual and FCC compliance details for the iKF-T3 wireless earbuds by Dongguan Oumu Technology Co., Ltd. This document provides regulatory information regarding operation, interference, and RF exposure.
PreviewiKF Find Air 5 Wireless Earbuds User Manual
Comprehensive user manual for the iKF Find Air 5 Wireless Earbuds, covering features like game mode, touch controls, charging, pairing, and app integration. Bluetooth 5.3, IPX5 waterproof.
PreviewiKF Solo Smart Wireless Noise Cancelling Headphones User Manual
Comprehensive guide for the iKF Solo smart wireless noise cancelling headphones, detailing features such as transparency mode, movie and game modes, Bluetooth pairing, button controls, noise cancellation options, charging, and after-sales service. Includes technical specifications and troubleshooting tips.
PreviewiKF T3 Headphones: Features and Operation
Comprehensive user manual for the iKF T3 Hybrid Active Noise Cancelling Headphones. Learn about features like ANC, Hi-Fi/Pop-Rock/Game modes, Bluetooth pairing, app integration, charging, and button controls for this over-ear wireless headset.
PreviewiKF-King Pro Wireless Headset User Manual
User manual for the iKF-King Pro wireless headset, covering setup, usage, features, specifications, troubleshooting, and warranty information.
PreviewiKF R2 Wireless Bluetooth Headphones User Manual & Guide
Comprehensive guide for iKF R2 wireless Bluetooth headphones, covering setup, features, app usage, button controls, and support. Learn how to connect, charge, and use your iKF R2 headphones.