CTOLITY UA1101L 1000W Portable Power Station User Manual

1. Introduction

The CTOLITY UA1101L is a versatile and powerful portable power station designed to provide reliable electricity for various outdoor activities, emergency backup, and mobile work. Featuring a 1024Wh LiFePO4 battery and a 1000W pure sine wave AC output, it can power multiple devices simultaneously. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance of your power station.

2. Safety Instructions

Do not disassemble, repair, or modify the unit.
Keep the unit away from fire, water, and extreme temperatures.
Do not use or store the unit in direct sunlight or high-temperature environments.
Ensure proper ventilation during use and charging.
Keep out of reach of children and pets.
Use only recommended charging cables and adapters.
Avoid dropping or subjecting the unit to strong impacts.
In case of abnormal operation, disconnect the unit immediately and contact support.

Internal view of the LiFePO4 battery with BMS protection, detailing safeguards against overcharge, over-discharge, overcurrent, overvoltage, short circuit, overload, thermal issues, and battery failure.

Detailed diagram of the advanced BMS (Battery Management System) chip, emphasizing its 8-fold protection circuit for safety and durability.

3. Package Contents

Please check that all the following items are included in your package:

CTOLITY UA1101L 1000W Portable Power Station
AC Charging Cable (Input)
User Manual

Image showing the contents of the product box: the UA1101L 1000W Power Station, an AC charging cable, and the user manual. — What's in the Box: The UA1101L 1000W Power Station, an AC charging cable, and the user manual.

4. Product Overview

The CTOLITY UA1101L features a clear display, intuitive controls, and multiple output ports for various devices.

Front view of the CTOLITY UA1101L Portable Power Station, highlighting its display, control buttons, and various output ports.

Ports and Controls:

Display Screen: Shows input/output power, battery level, and status indicators.
Power Button: Turns the unit on/off.
USB Output Ports: For charging USB-powered devices (USB-A, USB-C PD).
DC Output Ports: For DC-powered devices (Car Outlet, DC 5521).
AC Output Ports: For AC-powered appliances (EU Outlets).
LED Light Button: Controls the multi-mode LED light.
AC Input Port: For charging the power station via AC wall outlet.
DC Input Port: For charging via solar panel or car charger.

5. Setup

Initial Charging:

Before first use, fully charge your CTOLITY UA1101L power station. Connect the provided AC charging cable to the AC input port and plug it into a wall outlet. The display will indicate charging status. A full charge via AC typically takes approximately 5.5 hours.

Placement:

Place the power station on a stable, flat surface with adequate ventilation. Avoid placing it in enclosed spaces or near heat sources.

6. Operating Instructions

Turning On/Off:

Press and hold the main Power Button to turn the unit on or off. The display will light up when the unit is on.

Charging the Power Station:

Your power station can be charged using three methods:

AC Wall Outlet: Connect the AC charging cable to the AC input port and a wall outlet. (Approx. 5.5 hours)
Solar Panel: Connect a compatible solar panel (200W Max, VOC 12-28VDC/ 8.5A) to the DC input port. (Approx. 6-7 hours with optimal sunlight)
Car Charger: Connect a 12V/24V car charger to the DC input port. (Approx. 6-12 hours depending on car outlet wattage)

Diagram illustrating three charging methods for the power station: wall outlet (5 hours), solar panel (6 hours), and car output (5 hours). — Charge Anywhere: 3 Ways to Charge the Power Station.

Diagram showing the power station simultaneously charging from multiple sources (solar panel, car outlet, AC wall outlet) while also powering external devices. — The power station can charge other devices simultaneously while being recharged itself.

Using Output Ports:

Press the respective button (USB, DC, AC) to activate the desired output ports. The display will show the output wattage. Connect your devices to the appropriate ports.

AC Outlets: For laptops, small appliances, etc. (1000W continuous, 2000W surge).
USB-C PD: For fast charging compatible smartphones, tablets, and laptops (Max 100W).
USB-A: For charging various USB devices.
DC Outlets (Car/5521): For car refrigerators, portable air pumps, etc.

Image showing the power station in an outdoor camping setting, powering a laptop and other devices, demonstrating its capability to supply up to 8 devices simultaneously. — Power Supply for up to 8 Devices: The power station can simultaneously power various electronics.

Image showing the power station in an outdoor setting with a family, powering a laptop, illustrating its ability to supply up to 8 devices. — The power station provides power for up to 8 devices, ideal for family outdoor activities.

LED Light Function:

Press the LED button to cycle through different light modes (e.g., low, high, SOS). This feature is useful for camping or emergency situations.

Images demonstrating the power station's multi-mode LED light for emergencies and its quiet operation suitable for indoor use. — Illuminates Your Night: The power station features 4 LED modes for various situations, including quiet operation.

Image showing the power station's multi-mode LED light illuminating a tent at night, emphasizing its utility for emergencies. — Multi-Mode LED Light for Emergencies: The built-in LED light helps you find your way in the dark during a power outage.

7. Specifications

Category	Feature	Detail
BATTERY INFO	Capacity	1024Wh (12Ah)
	Type	LiFePO4 (Polymer 31Ah-5S2P)
	Life Cycles	5000+ Cycles to 80% Original Capacity
	Shelf-life	Recharge to 80% Every 3-6 Months
	Management System	MPPT Controller, BMS, etc.
OUTPUT	AC Outlets	100-240V (Factory setting accordingly)
	Inverter Type	Pure Sine Wave
	Surge Power	2000W
	USB-C Port	DC:18-24V/10A (Max 100W)
	USB-A Port	2 x 5V3A/9V2A/12V1.5A
	DC Outlets	1 x 12V/10A (Car Outlet), 2 x 12V/10A DC 5521 (5.5mm Outlets) *All Regulated.
INPUT	AC Charging Cable (Standard Mode)	200W Max.
	Solar Input	200W Max, VOC 12-28VDC/ 8.5A
	Car Input	12/24V from Cigarette Lighter Port
RECHARGE TIMES	AC Charging Cable (Standard Mode 200W)	≈5.5 Hours
	Solar (200W)	≈6-7 Hours (With prime sunshine, ideal orientation and low temperature)
	12V/24V Car Outlet (100W/200W)	≈11-12 or 6-7 Hours
GENERAL	Weight	27.8lbs/12.5kg
	Dimensions (LxWxD)	397282310mm
	Operating Temperature	-4-131℉ (-20-55℃)
	Storage Temperature	-4-113°F (-20-45°C)
	Certifications	UL Standard, CEC, DOE, FCC
	Warranty	12 Months

Promotional image highlighting the CTOLITY UA1101L Portable Power Station's key features: 1000Wh capacity, 1000W AC power, 8 outlet ports, and example runtimes for various appliances. — CTOLITY Portable Power Station UA1101L: Key features and example runtimes for common appliances.

8. Maintenance

Storage:

For optimal battery health, recharge the power station to 80% every 3-6 months, even if not in use. Store in a cool, dry place within the recommended storage temperature range (-4-113°F / -20-45°C).

Cleaning:

Use a dry, soft cloth to clean the exterior of the unit. Do not use abrasive cleaners or immerse the unit in water.

9. Troubleshooting

Unit not turning on: Ensure the battery is charged. If not, connect to an AC outlet for charging.
No output from ports: Ensure the specific output (AC, DC, USB) is activated by pressing its respective button. Check if the device connected is within the power station's wattage limits.
Slow charging: Verify that the charging source (AC adapter, solar panel, car charger) is providing sufficient power and is correctly connected. Solar charging efficiency depends on sunlight intensity and panel orientation.
Overload protection activated: If an overload occurs, the unit may shut down. Disconnect the overloaded device, restart the power station, and connect devices within its rated output.

10. User Tips

For maximum efficiency, especially with solar charging, ensure your solar panels are positioned to receive direct sunlight and are free from obstructions.
When using AC output for sensitive electronics, the pure sine wave inverter ensures stable and clean power, similar to grid electricity.
Consider the total wattage of all devices you plan to connect to avoid overloading the power station.
The power station is designed for portability, making it ideal for camping, RV trips, and as a reliable backup during power outages.

Collage of images depicting various use cases for the power station: field accommodations, caravaning, work sites, emergency power, and SOS situations. — Power Anytime, Power Anywhere: Illustrating diverse applications from outdoor adventures to emergency preparedness.

11. Warranty & Support

The CTOLITY UA1101L Portable Power Station comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. For warranty claims or technical support, please contact your retailer or the manufacturer directly with your purchase details.