1. Introduction
The Beitian BK-50D is a high-performance GNSS receiver designed for various applications requiring precise positioning and navigation. It supports multiple global navigation satellite systems including GPS, QZSS, GLONASS, BDS, and Galileo, along with SBAS augmentation. Featuring a Ublox M9140-KB chipset, it offers excellent sensitivity, fast acquisition times, and low power consumption. This manual provides detailed instructions for its setup, operation, and technical specifications.

Figure 1: Beitian M10050/M9140 GNSS Receiver overview, showing different receiver shapes and key features.
2. Key Features
- Multi-System Support: Compatible with GPS, QZSS, GLONASS, BDS, and Galileo.
- High Sensitivity: Tracking sensitivity of -167dBm for reliable signal reception.
- Fast Acquisition: Hot start in 2 seconds, warm start in 2 seconds, cold start in 24 seconds.
- Low Power Consumption: Operates at 15mA/5.0V.
- Flexible Output: Supports NMEA and UBX output protocols.
- Configurable Update Rate: Adjustable from 0.25Hz to 25Hz (default 1Hz).
- Integrated FLASH: Allows configuration changes to be saved permanently.
- Versatile Connectivity: Available with various connectors including DB9 and USB.
- Robust Design: Magnetic bottom for easy mounting and wide operating temperature range.

Figure 2: BE-50D Product Features.

Figure 3: Application Scenarios for the GNSS Receiver.
3. Package Contents
Upon opening the package, please verify that all items are present and in good condition.
- BE-50D Series GNSS Receiver (x1)
Note: Each product may come with different accessories; detailed configurations should be based on customer requirements.

Figure 4: Package Contents.
4. Setup and Connection
The Beitian BK-50D GNSS Receiver offers various connection methods depending on the model (e.g., USB, DB9, or exposed wires). Ensure you select the correct model for your application.
4.1 Power Supply
The receiver requires a DC voltage of 3.6V-5.5V, with a typical operating voltage of 5.0V. The current consumption is approximately 45mA at 5.0V.
4.2 Pin Description (DB-9 Female Connector)
For models equipped with a DB-9 Female connector, refer to the following pinout for proper connection:

Figure 5: Product Parameters and Connection Diagrams (refer to the bottom section for DB9 pinout).
| PIN | PIN Name | I/O | Description |
|---|---|---|---|
| 9 | VCC | I | DC 3.6 V-5.5V supply input, Typical: 5.0V |
| 2 | TX | O | RS-232 Serial Data Output |
| 3 | RX | I | RS-232 Serial Data Input |
| 5 | GND | G | Ground |
5. Operation
The Beitian BK-50D GNSS Receiver outputs data via NMEA 0183 or UBX protocols. The default update rate is 1Hz, configurable from 0.25Hz to 25Hz. The device includes FLASH memory, allowing custom configurations to be saved even after power loss.
5.1 Data Output Protocol
The receiver outputs standard NMEA messages. The protocol header varies based on the GNSS mode:
- Joint mode: GN
- GPS mode: GP
- GLONASS mode: GL
- Beidou mode: GB or BD
Common NMEA messages include RMC, VTG, GGA, GSA, GSV, and GLL. Detailed field descriptions for these messages can be found in the official datasheet.
5.2 Second Pulse Output
The second pulse output is configurable from 0.25 Hz to 10 MHz. The default period is 1 second, with the high level lasting for 100ms.
6. Technical Specifications
| Feature | Description |
|---|---|
| Chipset | M9140-KB |
| Frequency | GPS L1 C/A, QZSS L1 C/A/S, GLONASS L1OF, BDS B1I, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN |
| Receiving Format | GPS, GLONASS, BDS, GALILEO |
| Auxiliary System | SBAS, QZSS |
| Channels | 92 Searching Channel |
| Tracking Sensitivity | -167dBm |
| Reacquisition Sensitivity | -160dBm |
| Cold Start Sensitivity | -148dBm |
| Hot Start Sensitivity | -159dBm |
| Position Horizontal Accuracy | 1.5 m CEP |
| Velocity Accuracy | 0.05m/s |
| Dynamic Heading Accuracy | 0.3 deg |
| 1PPS Time Accuracy | RMS 30ns, 99% 60ns |
| Cold Start Acquisition Time | 24s |
| Warm Start Acquisition Time | 2s |
| Hot Start Acquisition Time | 2s |
| Support Rate | 4800bps - 921600bps, Default 115200bps |
| Data Level | RS-232 level |
| Data Protocol | NMEA, UBX |
| NMEA Message | RMC, VTG, GGA, GSA, GSV, GLL |
| Update Rate | 0.25Hz-25Hz, Default 1Hz |
| FLASH | With FLASH, the configuration can be changed, and the power will not be lost |
| Second Pulse | 0.25 Hz to 10 MHz configurable, default period 1s, high level 100ms |
| Operational Altitude | 80,000m |
| Operational Velocity | 500m/s |
| Operational Acceleration | <4g |
| VCC (Power Supply) | DC Voltage 3.6V-5.5V, Typical: 5.0V |
| Current Consumption | 45mA/5.0V |
| Dimension | Φ56.7mm*18mm |
| Weight | 80g |
| Connector | DB-9 Female connector |
| Cable Length | 2m |
| Fixed Method | Magnetic bottom |
| Operating Temperature | -40 °C ~ +85°C |
| Storage Temperature | -40°C ~ +105°C |
7. Troubleshooting
If you encounter issues with your Beitian BK-50D GNSS Receiver, consider the following common troubleshooting steps:
- No Satellite Fix: Ensure the receiver has a clear view of the sky. Obstructions like buildings, dense foliage, or indoor environments can block satellite signals.
- Incorrect Data Output: Verify the baud rate and data protocol settings (NMEA/UBX) match your host device. Check the wiring for DB9 or USB connections.
- Power Issues: Confirm the power supply voltage is within the specified range (3.6V-5.5V) and that the current is sufficient.
- Interference: Keep the receiver away from strong electromagnetic interference sources.
- Software/Driver: Ensure you have the correct drivers installed for USB connections and compatible software for processing GNSS data.
8. Care and Maintenance
To ensure the longevity and optimal performance of your GNSS receiver, follow these guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior. Avoid harsh chemicals or abrasive materials.
- Storage: Store the device in a cool, dry place within the specified storage temperature range (-40°C to +105°C) when not in use.
- Environmental Protection: While designed for outdoor use, avoid prolonged exposure to extreme weather conditions beyond its operating limits.
- Cable Care: Do not bend or crimp the cable excessively to prevent internal damage.
9. User Tips
- For best performance, mount the receiver with its magnetic base on a metallic surface in an open area.
- Regularly check for firmware updates from the manufacturer's website to ensure optimal performance and access to new features.
- When using the DB9 connector, double-check the pin assignments to prevent damage to the receiver or host device.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official Beitian website or contact your vendor. An electronic version of the user manual (datasheet) is available for download, which contains comprehensive technical details and protocol specifications.
Official Datasheet (PDF): View User Manual (PDF)
11. Product Video
Product showcase video demonstrating the Beitian GNSS Receiver.