1. Introduction
The QYT KT-A16 is a high-power handheld transceiver designed for aviation communication and weather reception. Featuring a 6W output, a 1.77-inch color LCD screen, and 200 memory channels, it offers reliable performance for various applications. This manual provides essential information for the proper setup, operation, and maintenance of your device.
2. Package Contents
Before using your QYT KT-A16 radio, please check the package contents to ensure all items are present:

- QYT KT-A16 Radio Unit
- Rechargeable Lithium-ion Battery (2000mAh)
- Antenna
- Desktop Charger
- Power Adaptor
- Belt Clip
- Hand Strap
- User Manual (this document)
3. Setup
3.1. Attaching the Antenna
- Align the antenna connector with the antenna port on the top of the radio.
- Gently screw the antenna clockwise until it is finger-tight. Do not overtighten.
3.2. Installing and Charging the Battery

- Ensure the radio is powered off.
- Align the battery pack with the battery compartment on the back of the radio.
- Slide the battery into place until it clicks securely.
- To charge, place the radio (with battery installed) into the desktop charger, or place the battery alone into the charger.
- Connect the power adaptor to the desktop charger and plug it into a power outlet.
- The charging indicator on the desktop charger will show the charging status. Charge the battery fully before first use.

3.3. Attaching the Belt Clip and Hand Strap
- Align the belt clip with the screw holes on the back of the radio.
- Secure it with the provided screws.
- Attach the hand strap to the designated loop on the radio for added security.
3.4. Controls and Functions Overview


4. Operating Instructions
4.1. Power On/Off and Volume Adjustment
- To power on, rotate the Power/Volume Knob clockwise.
- Continue rotating clockwise to increase volume; rotate counter-clockwise to decrease volume.
- To power off, rotate the Power/Volume Knob counter-clockwise until it clicks.
4.2. Channel Selection and Frequency Input
- Use the Channel Knob to cycle through programmed memory channels.
- Alternatively, use the Numeric Keypad to directly input frequencies or channel numbers.
- The radio supports Air Band frequencies: TX: 118.00000-136.99975MHz, RX: 108.00000-136.99975MHz.

4.3. Transmitting (PTT)
- Press and hold the PTT (Push-to-Talk) button on the side of the radio to transmit.
- Speak clearly into the microphone.
- Release the PTT button to stop transmitting and return to receive mode.
4.4. Scanning Modes
The radio supports three scanning modes: Time, Carrier, or Search. Refer to the on-screen menu (accessed via the MENU key) to select and configure your preferred scanning mode.
4.5. VOX Function
The Voice Operated Exchange (VOX) function allows for hands-free transmission. When VOX is enabled, the radio will automatically transmit when it detects your voice. Adjust VOX sensitivity via the menu to prevent accidental transmissions or missed speech.

4.6. Squelch Level Adjustment
Squelch suppresses weak signals and background noise. Adjust the squelch level through the menu or using the ASQ keys (ASQ (*) up Key, ASQ (#) down Key) to find a balance between blocking noise and receiving weak but important signals.
4.7. NOAA Weather Channels
The KT-A16 supports 10 NOAA Weather forecast Channels for USA, operating on WX: 161.650-163.275MHz. Access these channels via the menu to receive real-time weather warnings and information.

4.8. Keylock
To prevent accidental key presses, long press the Keylock switch (usually the '#' key) to activate or deactivate the keylock function.
5. Maintenance
5.1. Battery Care
- Always use the original QYT battery and charger.
- Do not expose the battery to extreme temperatures or direct sunlight.
- If the radio will not be used for an extended period, remove the battery and store it in a cool, dry place.
- Avoid fully discharging the battery frequently to prolong its lifespan.
5.2. Cleaning
- Wipe the radio's exterior with a soft, damp cloth.
- Do not use harsh chemicals, solvents, or abrasive cleaners.
- Ensure all ports and covers are closed to maintain the IP55 waterproof rating.
5.3. Storage
- Store the radio in a cool, dry, and dust-free environment.
- Keep it away from direct sunlight and heat sources.
6. Troubleshooting
If you encounter issues with your QYT KT-A16 radio, try the following basic troubleshooting steps:
- No Power: Ensure the battery is fully charged and correctly installed. Check the Power/Volume Knob is turned on.
- No Reception/Poor Audio: Check antenna connection. Adjust squelch level. Verify you are on the correct frequency/channel. Ensure volume is turned up.
- Cannot Transmit: Ensure the PTT button is fully pressed. Check if the keylock is active. Verify you are within the allowed transmit frequency range.
- Display Issues: If the screen is blank or flickering, try restarting the radio. Ensure the battery is charged.
For persistent issues, please contact QYT customer support.
7. Specifications
| Category | Specification |
|---|---|
| General | |
| Model Number | KT-A16 |
| Frequency Range (TX) | 118.00000-136.99975MHz |
| Frequency Range (RX) | 108.00000-136.99975MHz |
| Frequency Range (WX) | 161.650-163.275MHz |
| Channel Spacing | 25kHz, 8.33K (for AM mode) |
| Frequency Step | 2.50/5.00/6.25/10.00/12.50/25.00K |
| Number of Memory Channels | 200 |
| NOAA Weather Channels | 10 (for USA) |
| Antenna Impedance | 50ohm |
| Antenna Connector | SMA-Female |
| Power Supply Requirement | 7.2V DC |
| Battery Capacity | 2000mAh |
| Operating Temperature | -10°C to +60°C |
| Dimensions (W×H×D) | 62mm × 128mm × 35mm |
| Weight (with battery) | 239g |
| Waterproof / Water-Resistant | IP55 |
| Material | Plastic and metal |
| Certification | CE |
| Transmitter | |
| Output Power | 6.0W (PEP), 1.8W (CW) |
| Modulation Limiting | 70-100% |
| Audio Harmonic Distortion | Less than 10% (at 60% modulation) |
| Ham and Noise Ratio | More than 35dB |
| Spurious Emissions | More than 46dB |
| Frequency Stability | ±0.4kHz |
| Receiver | |
| Receive System | Double conversion superheterodyne |
| Intermediate Frequencies | 1st: 46.35MHz, 2nd: 450kHz |
| Sensitivity (COM) | Less than 0dBu (at 6dB S/N) |
| Sensitivity (NAV) | Less than 3dBu (at 6dB S/N) |
| Sensitivity (WX) | Less than -8dBu (at 12dB SINAD) |
| Squelch Sensitivity (COM/NAV) | Less than 0dBu |
| Squelch Sensitivity (WX) | Less than -5dBu |
| Spurious Response Rejection Ratio (COM/NAV) | More than 60dB |
| Spurious Response Rejection Ratio (WX) | More than 30dB |

8. User Tips
- Familiarize with Controls: Spend time understanding each button and knob's function before critical use.
- Monitor Battery Life: Keep an eye on the battery indicator on the 1.77-inch LCD color screen to avoid unexpected power loss.
- Program Channels: Utilize the 200 memory channels to store frequently used frequencies for quick access.
- Weather Awareness: Regularly check NOAA weather channels for updates, especially when traveling or in remote areas.
- PC Programming: For advanced users, consider using PC programming to customize settings and channels efficiently.
9. Warranty and Support
9.1. Warranty Information
The QYT KT-A16 radio unit is covered by a 12-month warranty. Accessories, including the battery, antenna, and charger, are covered by a 6-month warranty. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
9.2. Customer Support
For technical assistance, warranty claims, or any questions regarding your QYT KT-A16 radio, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.