1. Introduction
Thank you for choosing the NEWBOLER Bicycle Front Light. This manual provides essential information for the safe and effective use of your new bicycle light. Please read it thoroughly before installation and operation, and keep it for future reference.
2. Safety Information
- Please use a 5V/2A charger. Fast charging is not supported.
- Do not look directly into the beam or shine it into the eyes of others, as this may cause temporary vision impairment.
- The product is not 100% waterproof. Avoid prolonged use in heavy rain or submerging it in water to protect battery life.
- Keep out of reach of children.
3. Package Contents
Upon opening your NEWBOLER Bicycle Front Light package, you should find the following items:
- NEWBOLER Bicycle Front Light unit
- USB Charging Cable (Type-C)
- Handlebar Mounting Bracket(s)
- Mounting Screws and Allen Key
- Rubber Spacers (for handlebar diameter adjustment)
- USB-A to USB-C Adapter (for power bank function, if applicable)
4. Specifications
The NEWBOLER Bicycle Front Light comes in several models with varying features:
| Feature | Description |
|---|---|
| Body Material | Aluminum alloy (Military Grade) |
| Mounting Placement | Handlebar |
| Power Supply | Battery |
| Charging Port | Type-C |
| Charging Voltage | 5V/2A (Standard Charger) |
| Certification | CE |
| Dimensions (approx.) | 9.5cm (L) x 4.8cm (W) x 2.8cm (H) |
| Model | Lumen (Max) | Battery Capacity | Modes | Working Time (approx.) | Waterproof Level | Power Bank Function |
|---|---|---|---|---|---|---|
| LIG013-2000mAh | 3000Lumen | 2000 mAh | 4 Modes (Near, High Beam, Far & Near Full, Flashing) | 1.5-3 hours | IP65 | No |
| LIG610-2000mAh | 2000Lumen | 2000 mAh | 5 Modes (Near, Far, Far & Near Full, Flicker, Daytime Running Light) | 2-3.5 hours | IPX5 | No |
| LIG008-4000mAh | 3000Lumen | 4000 mAh | 4 Modes (Near, High Beam, Far & Near Full, Flashing) | 2.5-4.5 hours | IPX5 | Yes |
5. Setup
Follow these steps to install your NEWBOLER Bicycle Front Light:
- Attach the Bracket Base: Place the bracket base over your bicycle handlebar. Use appropriate rubber spacers if needed to ensure a snug fit.
- Secure the Bracket: Adjust the position of the bracket on the handlebar and tighten the base screws firmly using the provided Allen key. Ensure it is stable and does not rotate easily.
- Mount the Light: Slide the bicycle light unit onto the installed bracket until it clicks securely into place.
- Final Tightening: Tighten any additional screws on the bracket designed to fix the light unit in place, ensuring a stable installation that does not shift when shaken vigorously.
6. Operation
Power On/Off and Mode Selection
The light features a power button on the top. Press the button to cycle through different lighting modes. A long press typically turns the light off or activates special modes like Daytime Running Light (for LIG610).
- LIG013 & LIG008 (4 Modes): Near light, High beam bright, Far and Near full light, Flashing.
- LIG610 (5 Modes): Click to open: Near light, Far light, Far and Near full light, Flicker. Long press to open: Daytime Running Light.
Digital Display
The integrated digital display shows the current battery percentage (1%-100%) and, for some models, the remaining runtime for the active light mode. During charging, it may display the charging progress (e.g., 0-100%).
Charging the Light
Connect the provided USB Type-C cable to the light's charging port and plug the other end into a 5V/2A USB power source (e.g., wall adapter, computer USB port). The digital display will indicate charging status. Avoid using fast chargers.
Power Bank Function (LIG008-4000mAh only)
The LIG008-4000mAh model can act as a power bank. Use the provided USB-A to USB-C adapter to connect your mobile phone or other USB-powered devices to the light's charging port to utilize its battery for emergency charging.
7. Maintenance
- Clean the light regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure the USB port rubber cover is properly sealed after charging to maintain water resistance.
- Store the light in a cool, dry place when not in use.
- Charge the battery at least once every three months to prolong its lifespan, even if not in regular use.
8. Troubleshooting
- Light not turning on: Ensure the battery is charged. If the digital display shows 0%, charge the light.
- Light not charging: Check the USB cable and charger. Ensure the charger is 5V/2A. Try a different cable or power source.
- Light flickering or dim: This may indicate a low battery. Recharge the light.
- Bracket loose: Re-tighten the mounting screws on the handlebar bracket. Ensure appropriate spacers are used for a secure fit.
9. User Tips
- For optimal visibility and safety, use the appropriate light mode for your riding conditions (e.g., flashing mode for daytime visibility, high beam for unlit paths).
- Regularly check the light's mounting to ensure it remains secure, especially before long rides.
- Consider carrying a small portable power bank for extended rides if your light does not have a built-in power bank function, or if you plan to use the power bank function for other devices.
10. Warranty & Support
Your NEWBOLER Bicycle Front Light is covered by a manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Please retain your proof of purchase.
