Introduction
Welcome to the user manual for your LCKICOO SG-26 Pro Smart Audio Glasses. These innovative glasses combine stylish design with advanced audio technology, offering a seamless blend of fashion and functionality. Featuring Bluetooth 5.4 connectivity, HIFI sound quality, and UV protection, they are designed to enhance your daily activities, from office work to driving and leisure.
Setup
1. Charging the Glasses
Before first use, fully charge your SG-26 Pro Smart Audio Glasses. Use the provided Type-C cable to connect the glasses to a power source. The charging indicator (if present, not explicitly shown but implied by "Type-C fast charging") will typically show charging status.
2. Powering On/Off
- Power On: Press and hold the power button (located on the temple, typically a touch-sensitive area) for approximately 3 seconds until you hear a power-on prompt or see an indicator light.
- Shutdown: Press and hold the power button for approximately 5 seconds until you hear a power-off prompt or see an indicator light turn off.
3. Bluetooth Pairing
To connect your SG-26 Pro Smart Audio Glasses to your device (smartphone, tablet, etc.):
- Ensure the glasses are powered on and in pairing mode (often indicated by a flashing LED).
- On your device, go to Bluetooth settings and turn Bluetooth on.
- Search for available devices. You should see "SG-26 Pro" or a similar name appear in the list.
- Select the glasses to pair. Once connected, you will hear a confirmation sound or see a steady indicator light.
The glasses feature an upgraded wireless Bluetooth 5.4 for stable and efficient connection.
Operating Instructions
The SG-26 Pro Smart Audio Glasses feature intuitive touch controls integrated into the temples. Refer to the diagram below for specific functions:
- Power On: Press for 3 seconds.
- Shutdown: Press for 5 seconds.
- Volume Increase: Double click on the left ear.
- Volume Decrease: Double click on the right ear.
- Previous Song: Press the left ear button for 1.5 seconds.
- Next Song: Press the right ear button for 1.5 seconds.
- Play/Pause: Click once on the left or right ear.
- Answer/Hang Up Call: Click once on the left or right ear.
- Reject Incoming Calls: Press the left or right ear for 2 seconds.
- Voice Assistant (e.g., "hi!Siri"): Three clicks on the right earphone.
- Last Digit Redial: Three clicks on the left earphone.
Audio Features
Experience high-fidelity audio with 360° surrounding sound, providing clear and transparent calls and music. The glasses utilize an oversized sound unit for large amplitude, high sensitivity, and full, vigorous sound.
Maintenance
To ensure the longevity and optimal performance of your SG-26 Pro Smart Audio Glasses, follow these maintenance guidelines:
- Cleaning: Gently wipe the lenses with a soft, lint-free cloth. For stubborn smudges, use a lens cleaning solution specifically designed for eyewear. Avoid harsh chemicals or abrasive materials.
- Water Resistance: The glasses are waterproof and sweatproof. However, avoid submerging them in water or exposing them to high-pressure water jets. Dry them thoroughly if they get wet.
- Storage: When not in use, store the glasses in their protective case to prevent scratches and damage. Avoid leaving them in direct sunlight or extreme temperatures.
- Charging Port: Keep the Type-C charging port clean and free of debris.
Troubleshooting
If you encounter any issues with your SG-26 Pro Smart Audio Glasses, try the following troubleshooting steps:
- No Power: Ensure the glasses are fully charged. Connect them to the Type-C charger and wait for a few minutes before attempting to power on again.
- Cannot Pair Bluetooth:
- Make sure Bluetooth is enabled on your device and the glasses are in pairing mode.
- Move the glasses closer to your device.
- Turn off and on the Bluetooth on your device, then try pairing again.
- Restart both your device and the glasses.
- No Sound/Low Volume:
- Check the volume levels on both the glasses and your connected device.
- Ensure the glasses are properly paired and connected.
- Try playing audio from a different application or source.
- Call Issues:
- Ensure the glasses are connected and selected as the audio output for calls on your device.
- Check microphone settings on your device.
- Unresponsive Touch Controls:
- Ensure your fingers are clean and dry when using touch controls.
- Restart the glasses.
If the problem persists after trying these steps, please contact customer support.
Specifications
The following table outlines the key specifications of the SG-26 Pro Smart Audio Glasses:
| Feature | Specification |
|---|---|
| Product Name | Intelligent Audio Glasses |
| Model | SG-26pro |
| Bluetooth Version | 5.4 |
| Bluetooth Distance | 15 meters |
| Call Duration | Up to 8 hours |
| Standby Time | Over 168 hours |
| Music Listening Time | Up to 8 hours |
| Battery Capacity | 80+80 mAh (total 160 mAh) |
| Lens Type | Optical material anti-blue light, UV protection (blocks 98% UVA/UVB) |
| Frame Material | Metal |
| Temple Material | Super tough P |
| RAM | 2 MB |
| Certification | CE |
| Origin | Mainland China |
User Tips
- Optimal Fit: Ensure the glasses fit comfortably to maximize sound quality and prevent slippage during movement. The silicone nose pads and metal hinges are designed for comfort and durability.
- Voice Assistant Integration: Utilize the voice assistant feature (three clicks on the right earphone) for hands-free control of navigation, calls, and music playback.
- Battery Management: For best battery life, avoid completely draining the battery frequently. Charge the glasses regularly using the Type-C port.
- Environmental Awareness: While enjoying your audio, remain aware of your surroundings, especially when in traffic or other potentially hazardous environments, as the open-ear design allows ambient sound.
Warranty & Support
For warranty information, technical support, or any product-related inquiries, please refer to the seller's official website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
