1. Introduction
The OLOPKY G20S / G20S Pro is a versatile voice remote control designed for Smart TVs, Android TV Boxes, Mini PCs, and HTPCs. It combines a 2.4G wireless air mouse, a 6-axis gyroscope, and IR learning capabilities, offering a convenient and intuitive control experience. The G20S Pro model further enhances connectivity with Bluetooth 5.0 for compatible devices.
2. Safety Information
- Keep the device away from water and other liquids.
- Do not expose the device to extreme temperatures or direct sunlight.
- Avoid dropping or subjecting the device to strong impacts.
- Do not attempt to disassemble or repair the device yourself.
- Dispose of batteries properly according to local regulations.
3. Package Contents
- 1 x Voice Remote Control (G20S or G20S Pro)
- 1 x USB Receiver
- 1 x Instruction Manual
Note: 2x AAA batteries are not included and must be purchased separately.
4. Product Overview
Familiarize yourself with the buttons and features of your remote control.
The G20S Pro model features a similar layout with additional Bluetooth capabilities.
Button Functions:
- Power: Turns the device on/off.
- Mic: Activates voice input.
- Indicator: LED light for status.
- IR Learning Key: Used for infrared programming.
- Mouse On/Off: Toggles air mouse function.
- Pg+ / Pg-: Page Up / Page Down.
- Navigation Keys (Up/Down/Left/Right): For menu navigation.
- OK: Enter / Mouse Left click.
- Return / Mouse Right: Back function / Mouse Right click.
- Home: Returns to the home screen.
- Open Google Voice Assistant: Dedicated button for voice assistant.
- Volume +/-: Adjusts volume.
- Previous / Next: Media playback control.
- Play/Pause: Media playback control.
- Menu: Accesses menu options.
- BackSpace: Deletes characters.
- Backlight Toggle: Press and hold the designated button (often near '0' or 'Menu') for 3 seconds to turn the backlight on/off.
5. Setup
5.1 Battery Installation
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA batteries, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
5.2 USB Receiver Connection (for G20S and G20S Pro 2.4G mode)
- Locate the USB receiver, typically found inside the battery compartment or packaged separately.
- Plug the USB receiver into an available USB port on your Smart TV, Android TV Box, Mini PC, or HTPC.
- The system should automatically detect and install the necessary drivers. The remote control is ready for use once the receiver is recognized.
5.3 Bluetooth Pairing (G20S Pro only, for BT5.0 connection)
For G20S Pro models, you can connect via Bluetooth 5.0, especially useful for Android 10 ATV devices.
- Ensure your device's Bluetooth is enabled.
- On the G20S Pro remote, press and hold the "OK" and "Return" buttons simultaneously for a few seconds. This clears any previous pairing information and prepares the remote for a new connection.
- The remote's indicator light will flash, indicating it's in pairing mode.
- On your device (e.g., Android TV Box), go to Bluetooth settings and search for new devices.
- Select "G20S Pro" from the list of available devices to complete the pairing process.
6. Operating Instructions
6.1 Air Mouse Function
The remote features a 6-axis gyroscope for motion sensing, allowing you to control a cursor on your screen by moving the remote in the air.
- To activate/deactivate the air mouse, press the Mouse On/Off button.
- Move the remote in the air to control the cursor.
- Press the OK button to left-click.
- Press the Return button to right-click (if supported by the application).
6.2 Voice Control
The built-in microphone allows for voice input and control, especially with Google Assistant.
- Press the Mic button or the dedicated Google Voice Assistant button.
- Speak clearly into the microphone.
- Examples of commands: "Open Netflix", "Open YouTube", "Open Google Play Store", "Today's weather", "Open Settings".
Note: The voice search function primarily works with the built-in voice input search box or compatible applications. It may not function across all apps like some dedicated smart assistant remotes.
6.3 IR Learning Function
The remote can learn infrared codes from your existing TV remote, allowing you to control basic TV functions (like power and mute) with a single remote.
- Enter Learning Mode: Press and hold the "Power" button on the G20S/G20S Pro remote until the LED indicator light changes its flashing frequency from fast to slow. This indicates the remote has entered IR learning mode.
- Position Remotes: Hold the G20S/G20S Pro remote and your TV remote so their infrared receiving parts face each other, approximately 2-3 cm apart.
- Initiate Learning: Press the "Power" button on your TV remote. The LED indicator on the G20S/G20S Pro will turn on, then begin flashing.
- Learning Complete: The LED light will turn off, signifying that the remote has successfully learned the infrared code value. The product will automatically store the code and exit learning mode.
- Clear Learned Code: To clear a learned infrared code value, press "OK" + "DEL" simultaneously.
Note: Typically, the "Power" and "Mute" buttons are programmable via IR learning.
6.4 Backlight Control (G20S Pro only)
The G20S Pro features a backlight for improved visibility in low-light conditions.
- To turn the backlight on or off, press and hold the dedicated backlight button (often located near the '0' or 'Menu' button) for 3 seconds.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the low battery indicator flashes slowly. Always use new AAA batteries.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage. Store in a cool, dry place.
8. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Remote not responding |
|
| Air mouse cursor is erratic or not moving smoothly |
|
| Voice control not working |
|
| IR learning fails |
|
9. Specifications
| Feature | Specification |
|---|---|
| Dimensions | 160mm x 45mm x 20mm |
| Weight | 60g |
| Wireless Mode | GFSK (2.4GHz) |
| Bluetooth (G20S Pro only) | BT5.0 |
| Operating Frequency | 2.4GHz |
| Operating Distance | >10 meters |
| Operating Voltage | 3.0V |
| Working Current | <15mA |
| Standby Current | <20uA |
| Power Supply | 2 x AAA Batteries |
| Compatibility | Smart TV, Android TV Box, Mini PC, HTPC (Linux, Android 2.x/4.x, Win 2000/Vista/7/8, Mac OS X) |
| Certification | CE |
10. User Tips
- Battery Life: For optimal performance and battery life, use high-quality AAA batteries. The remote automatically enters an idle sleep state to conserve power.
- Wireless Range: Ensure the USB receiver has a clear line of sight to the remote for the best wireless range (up to 10 meters). Avoid placing the receiver behind large metal objects.
- Voice Clarity: When using voice commands, speak clearly and directly into the microphone on the remote for accurate recognition.
- IR Learning: When performing IR learning, ensure the remotes are very close and directly aligned to ensure successful code transfer.
11. Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty service.
For additional information or to view the original user manual in PDF format, please refer to the following link: User Manual (PDF)
12. Product Video Overview
Watch this video for a quick overview of the product and its features.