Introduction
This manual provides instructions for the proper installation, use, and maintenance of your Soft TPU Car Remote Key Case Cover. This product is designed to protect your BMW remote key from scratches, drops, and daily wear and tear, while maintaining full functionality of the key buttons.
Important Compatibility Note:
Please carefully compare the shape of your existing BMW remote key with the image provided above to ensure compatibility. This key case is specifically designed for certain BMW E-series remote keys and may not fit other models or brands.
Setup and Installation
Follow these steps to install your new TPU key case cover:
- Prepare Your Key: Ensure your BMW remote key is clean and free of debris.
- Open the Key Case: The TPU key case is flexible. Gently separate the two halves of the key case if it comes in two pieces, or stretch the opening if it's a single-piece sleeve.
- Insert the Key: Carefully slide your BMW remote key into the TPU case. Align the key buttons with the corresponding button markings on the case. The flexible TPU material allows for a snug fit.
- Secure the Case: If your case came in two pieces, ensure both halves snap securely around your key. If it's a sleeve, ensure the key is fully seated within the cover.
- Attach Keyring (Optional): If your key case includes a keyring or buckle, attach it to the designated loop on the key case.
The key case is designed to accommodate various keyring attachments, such as the buckle shown here. - Grey Buckle Variant:
Key case with a metal buckle keyring. - Grey Braided Strap Variant:
Key case with a braided leather-style strap keyring. - Grey Rope Variant:
Key case with a simple rope keyring. - Grey Shell Variant (Simple Keyring):
Key case with a basic metal keyring.
- Grey Buckle Variant:
Operating Instructions
The TPU key case cover is designed to be a protective layer for your remote key. Once installed, operate your car key as you normally would. The case will not interfere with the signal transmission or button functionality.
- Press the buttons on your key through the case to lock, unlock, or open the trunk.
- The case provides a comfortable grip and added protection against impacts.
Care and Maintenance
To ensure the longevity and appearance of your TPU key case cover, follow these maintenance guidelines:
- Cleaning: Wipe the case with a soft, damp cloth to remove dust and dirt. For tougher stains, a mild soap solution can be used, followed by rinsing with clean water and air drying.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the TPU material.
- Storage: When not in use, store the key case in a cool, dry place away from direct sunlight to prevent material degradation.
- Flexibility: The case is made from soft TPU, which is flexible and durable.
The Soft TPU material offers excellent flexibility and durability.
Troubleshooting
- Problem: The key case does not fit my car key.
- Solution: This product is designed for specific BMW E-series remote keys. Refer to the "Important Compatibility Note" in the Introduction section and the accompanying image. If your key does not match the depicted shape, the case is not compatible. Please verify compatibility before purchase.
- Problem: Buttons are difficult to press or misaligned.
- Solution: Ensure the key is correctly seated within the case. Remove the key, realign it carefully, and reinsert it, making sure all buttons correspond to the case's button markings. The flexible TPU should allow for proper alignment.
- Problem: The key signal is weak or not working.
- Solution: The TPU material is designed not to interfere with key signals. First, remove the key case and test your key. If the key works normally without the case, try reinstalling the case, ensuring no foreign objects are trapped inside. If the issue persists, the problem might be with the key itself, not the case.
Specifications
| Feature | Detail |
|---|---|
| Material | TPU (Thermoplastic Polyurethane) |
| High-concerned chemical | None |
| Origin | Mainland China |
| Approximate Length | 20 cm |
| Approximate Width | 14 cm |
| Approximate Height | 2 cm |
| Approximate Weight | 0.049 kg |
| Compatibility | BMW E90, E60, E70, E87, 3 Series, 5 Series, 6 Series, M3, M5, X1, X5, X6, Z4, E71, E72, E88, E89, E91, E92 (Please verify key shape) |
User Tips
While no specific user reviews or Q&A were available, here are some general tips for using your key case:
- Regular Checks: Periodically remove the key case to clean both the key and the inside of the case, preventing dust or grit buildup that could scratch the key.
- Avoid Overstretching: While TPU is flexible, avoid excessive stretching during installation or removal to maintain its original shape and fit.
- Keyring Security: Ensure any attached keyring or buckle is securely fastened to prevent accidental detachment of your key.
Warranty and Support
For any questions regarding your Soft TPU Car Remote Key Case Cover, please contact the seller or retailer from whom you purchased the product. Information regarding specific warranty terms, if any, would typically be provided at the point of purchase or on the product packaging.
Keep your purchase receipt or order details for any warranty claims or support inquiries.
