LAXASFIT H1 Smart Watch User Manual

Introduction

Welcome to the LAXASFIT H1 Smart Watch user manual. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new smartwatch. The LAXASFIT H1 is designed to be a comprehensive companion for your daily life, offering features such as Bluetooth calling, heart rate and sleep monitoring, multi-sport tracking, and smart notifications, all displayed on a vibrant 1.45-inch high-definition screen.

LAXASFIT H1 Smart Watch overview.

Setup

1. Charging and Activation

Before first use, your LAXASFIT H1 Smart Watch must be charged and activated. Use the provided wireless charging cable with its electromagnetic suction cup on the back of the watch. Connect the charger to a 5V 1A or lower power adapter.

Magnetic charging for your smartwatch.

2. App Download and Connection

To unlock the full potential of your smartwatch, download and install the 'LaxasFit' application on your smartphone. Scan the QR code below using your phone's camera or a QR code scanner app to download the application.

Scan to download the LaxasFit App.

Connecting the Watch:

1. Open the LaxasFit App and set up your personal profile.
2. Navigate to the "Device" section within the app.
3. Click on "Add Device" and select your LAXASFIT H1 Smart Watch from the scanned devices list.
4. Ensure your phone's Bluetooth is turned on.
5. The watch's MAC address can be found in "Settings" > "About" on the watch.
6. When connecting for the first time, allow the watch to use Wireless permission if prompted.
7. If the watch remains powered on for more than 120 seconds without connecting to the app, its Wireless function will automatically turn off. To connect, turn Wireless ON/OFF in the watch's "Settings" > "Watch" menu.

Wireless Call and Information Reminder feature.

Demonstration of LAXASFIT H1 Smart Watch features and usage.

Operating Your Smart Watch

The LAXASFIT H1 Smart Watch offers a variety of functions to enhance your daily life. Here's how to use them:

Core Functions

• Wireless Call: Open the app to link the watch's Wireless. After synchronizing with your phone, you can make, answer, or reject calls directly from the watch.
• Message Reminder: To receive all messages and social media notifications, ensure notification authorization is enabled on your phone.
• Sports Mode: Enter the exercise mode selection interface (running, jump rope, cycling, climbing) to start data monitoring.
• Exercise Record: The watch records all your exercise data.
• Pedometer: Counts your daily step data. Data is cleared at 00:00 AM and can be viewed in the app.
• Sleep Monitor: Enable Sleep Monitor to track the quality of your sleep.

Overview of LAXASFIT H1 Smart Watch features.

Multi-scenario exercise tracking on the smartwatch.

Heart Rate Monitor in action.

Additional Functions

• Remote Shutter: After connecting the watch to your phone, open the "APP" interface's shutter mode. Click or shake the watch to take pictures, which will be automatically saved to your phone.
• Music Players: Control your phone's music player remotely after connecting the device.
• Find Mobile Phone: When connected, tap the watch to find your phone. Long press the magnifying glass icon, and your phone will ring.
• Weather: Displays current and tomorrow's weather. Weather info syncs after app connection but won't update after a long disconnection.
• Stop Watch: Tap the start button on the stopwatch page to begin timing, and tap the stop button to end.
• Alarm: Set up to 8 alarms in the app or on the watch. The watch will display an alarm icon and vibrate at the set time.
• Sedentary Reminder: Set a sedentary time. The bracelet will vibrate to remind you, and the interface will show a reminder label.
• Always on Display: After setting, the watch screen will display the time even after it turns off.
• Watch Face Style: Customize the UI style of your watch face.
• About: Displays the watch's MAC address, Wireless name, and version number.
• Brightness: Adjust the brightness level and backlight off time.
• Settings: Turn vibration on/off and adjust the volume.
• Language: Set the language in the app or on the watch side; the language will synchronize.

Voice Assistant, Find Phone, and Music Control features.

Maintenance

To ensure the longevity and optimal performance of your LAXASFIT H1 Smart Watch, follow these maintenance guidelines:

• Cleaning: Regularly wipe your watch with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the screen or casing.
• Water Resistance: The watch is Life Waterproof. Avoid exposing it to hot water, steam, or high-pressure water, as this can cause damage. Do not wear the watch in hot baths or saunas.
• Charging: Use only the provided charging cable and a compatible 5V 1A or lower power adapter. Avoid overcharging.
• Storage: Store the watch in a cool, dry place when not in use. Avoid extreme temperatures.
• Strap Care: Keep the strap clean and dry. If it gets wet, dry it thoroughly to prevent skin irritation or damage to the material.

Troubleshooting

Watch Not Connecting to Phone

If your watch is not connecting to your phone despite following the setup instructions:

1. Reset Watch: Go to "Settings" > "System" on your watch and click "Reset" to restore factory settings.
2. Forget Device: On your phone, go to Bluetooth settings and "Forget" or "Unpair" the watch.
3. Reconnect: Repeat the app download and connection steps from the Setup section.
4. Wireless Timeout: If the watch is on for more than 120 seconds without connecting to the app, its Wireless function will automatically turn off. To reconnect, turn Wireless ON/OFF in the watch's "Settings" > "Watch" menu.

Watch Not Receiving Push Notifications

If your watch is not receiving notifications:

1. Phone Settings: Ensure message push is enabled on your mobile phone.
2. Notification Bar Display: Verify that messages can be displayed in your phone's notification bar. The watch relies on this for notifications. If no notifications appear on your phone, the watch cannot receive them. (Check your phone's notification settings to enable/disable multimedia message alerts).
3. Accessibility Settings: Enable accessibility settings on your device. (Find these in your phone's settings and activate them for your device).

Why Can't I Wear the Watch in a Hot Bath?

The temperature of bath water is relatively high, generating a lot of water vapor. This vapor, being in a gaseous state with a small molecular radius, can easily penetrate through the gaps in the device's casing. When the temperature drops, it condenses into liquid water droplets, which can easily cause an internal short circuit and damage the circuit board, ultimately damaging the entire device. Therefore, avoid wearing the watch in hot baths or saunas.

FCC Warning

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important:

Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Specifications

Included in the box and product dimensions.

Warranty and Support

Your LAXASFIT H1 Smart Watch is manufactured with high-quality materials and undergoes strict quality control. For any issues or support, please refer to the official user manual PDF available from the seller or contact customer service. The official user manual (PDF) can be referenced for further details.

User Tips

• Keep App Updated: Regularly update the LaxasFit app to ensure optimal performance and access to new features.
• Monitor Battery: While the watch has a long battery life, keep an eye on the battery indicator, especially before extended use of features like GPS (if available) or continuous heart rate monitoring.
• Customize Watch Faces: Explore the multiple watch faces available in the app to personalize your device.
• Check Notifications: Ensure all necessary permissions are granted to the LaxasFit app on your phone for seamless notification delivery.
• Regular Sync: Sync your watch with the app regularly to ensure all your health and activity data is up-to-date.