Hatteker RSCW-9598A 3-in-1 Electric Shaver User Manual

Introduction

Thank you for choosing the Hatteker RSCW-9598A 3-in-1 Electric Shaver. This versatile grooming tool is designed for a comfortable and efficient shaving experience, offering wet and dry shaving, beard trimming, and nasal/ear hair removal. Please read this manual carefully before use to ensure proper operation and maintenance.

Product Features

3-in-1 Multifunction: Electric shaver, beard trimmer, and nasal/ear hair trimmer.
Wet & Dry Shave: Suitable for both dry shaving and refreshing wet shaves with foam or gel.
100% Waterproof: Fully washable design for easy cleaning under running water.
Hyper Flex Technology: 360-degree intelligent floating heads adapt to facial contours for a close shave.
Durable Blades: Stainless steel double-ring blades for efficient and smooth cutting.
USB Chargeable: Convenient charging via USB cable.
Long Battery Life: Over 90 minutes of cordless operation on a full charge.
LED Display: Shows battery percentage, charging status, and travel lock indicator.
One-Button Start: Simple and intuitive operation.
Large Beard-Storage Box: Collects trimmed whiskers to prevent mess.

Package Contents

Please check the package for the following items:

Hatteker RSCW-9598A Electric Shaver (Main Unit)
Shaver Head Attachment
Beard Trimmer Head Attachment
Nasal/Ear Hair Trimmer Head Attachment
USB Charging Cable
Cleaning Brush
User Manual

Hatteker RSCW-9598A electric shaver with shaver head, beard trimmer head, and nasal trimmer head — Image: Hatteker RSCW-9598A electric shaver with its three interchangeable heads.

Setup

1. Initial Charging

Before first use, fully charge the shaver.
Connect the USB charging cable to the shaver's charging port and plug the other end into a USB power source (e.g., computer, wall adapter).
The LED display will show the battery percentage increasing during charging. A full charge typically takes up to 2 hours.
Once fully charged, the display will show 100%. Disconnect the charger.

Hatteker shaver connected to a laptop via USB for charging — Image: The shaver being charged via a USB cable connected to a laptop. The display shows '100%' and charging indicators.

2. Attaching/Detaching Heads

The shaver comes with interchangeable heads for different grooming needs.

To attach a head, align the desired head with the shaver body and rotate it clockwise until it clicks securely into place.
To detach a head, hold the shaver body firmly and rotate the attached head counter-clockwise, then pull it off.

Diagram showing how to rotate and attach/detach the shaver head — Image: Illustration demonstrating the rotation method to attach and detach the shaver head from the main unit.

Operating Instructions

1. Power On/Off

Press the power button once to turn the shaver on.
Press the power button again to turn the shaver off.

2. Using the Shaver Head

Dry Shave: Ensure your face is clean and dry. Move the shaver in small, circular motions against the direction of hair growth.
Wet Shave: Apply shaving foam or gel to your face. Move the shaver in small, circular motions. Rinse the shaver head frequently during use.
The Hyper Flex Technology and 360-degree floating heads will adapt to the contours of your face for a close and comfortable shave.

Man shaving with the electric shaver, demonstrating wet and dry shave capabilities — Image: A man demonstrating both wet shaving with foam and dry shaving with the electric shaver head.

3. Using the Beard Trimmer Head

Attach the beard trimmer head.
Select your desired cutting length using the included guide combs (if applicable, typically 0.5-1mm minimum to 5-10mm maximum).
Move the trimmer against the direction of hair growth for an even trim.

Man trimming his beard with the beard trimmer attachment — Image: A man using the beard trimmer attachment to shape his beard.

4. Using the Nasal/Ear Hair Trimmer Head

Attach the nasal/ear hair trimmer head.
Gently insert the trimmer tip into your nostril or ear canal.
Move the trimmer slowly to remove unwanted hair. Do not insert too deeply.

Man using the nasal hair trimmer attachment — Image: A man using the nasal hair trimmer attachment for nose hair removal.

5. Travel Lock Function

To prevent accidental activation during travel, the shaver features a travel lock:

To activate: Press and hold the power button for 3 seconds. A lock icon will appear on the LED display.
To deactivate: Press and hold the power button for 3 seconds again. The lock icon will disappear.

Maintenance

1. Cleaning the Shaver

Regular cleaning ensures optimal performance and hygiene.

Turn off the shaver and detach the head you used.
Rinse the detached head and the shaver's cutting unit under running water. The shaver is 100% waterproof, allowing for easy rinsing.
Use the provided cleaning brush to remove any stubborn hair clippings from the blades and internal components.
Shake off excess water and allow all parts to air dry completely before reattaching or storing.

Hand holding the Hatteker shaver under running water for cleaning — Image: A hand holding the Hatteker shaver under running water, demonstrating its waterproof cleaning capability.

2. Blade Care

The stainless steel blades are designed for durability. Avoid dropping the shaver or applying excessive force to the blades.
For optimal performance, consider replacing the shaver heads every 12-18 months, depending on usage.

3. Storage

Store the shaver in a cool, dry place, away from direct sunlight and high humidity.
Ensure the shaver is clean and dry before storing.

Troubleshooting

Problem	Possible Cause	Solution
Shaver does not turn on.	Battery is depleted; Travel lock is activated.	Charge the shaver; Deactivate travel lock by pressing and holding the power button for 3 seconds.
Poor shaving performance.	Blades are dirty or dull; Head not properly attached.	Clean the shaver head thoroughly; Ensure the head is securely attached; Consider replacing the shaver head if blades are dull.
Shaver not charging.	USB cable or adapter is faulty; Charging port is dirty.	Try a different USB cable or power adapter; Clean the charging port gently with a dry brush.
Excessive noise or vibration.	Hair caught in blades; Head not properly attached.	Clean the shaver head; Reattach the head securely.

Specifications

Feature	Detail
Model	RSCW-9598A (also referred to as RSCX-9598A)
Blade Material	Stainless Steel
Power Type	Battery operation
Battery Charging Time	Up to 2 hours
Battery Life	Over 90 minutes
Battery Capacity	1200 mAh Li-ion
Functions	Wet haircut, dry haircut, washing knives under water, fast charging, charging indication
Maximum Cutting Length	5 - 10 mm
Minimum Cutting Length	0.5 - 1 mm
Length Adjustment Method	Change of nozzles
Number of Nozzles	3 - 4 pcs (depending on configuration)
Purpose	For nose and ears, for beard and mustache, for body, for eyebrows, for the head
Material	ABS
Motor Type	ROTARY
Certification	CE
Origin	Mainland China
Package Dimensions	25 cm (L) x 15 cm (W) x 8 cm (H)
Package Weight	0.434 kg

Warranty and Support

This Hatteker product is designed for reliability and performance. For any issues or questions, please refer to the following:

Seller Contact: For product support, warranty claims, or technical assistance, please contact the seller directly through your purchase platform.
Return Policy: Refer to the return policy of the retailer or platform where you purchased the product. AliExpress offers free returns within 90 days for eligible items.
Buyer Protection: Your purchase may be covered by buyer protection policies offered by the platform.

Please retain your proof of purchase for any warranty or support inquiries.

	HATTEKER RFC-695 Electric Hair Clipper User Manual and Safety Guide Comprehensive user manual for the HATTEKER RFC-695 Electric Hair Clipper, covering features, safety instructions, charging, usage, cleaning, maintenance, and environmental disposal.
	Hatteker HT-300 4-in-1 Hot Air Hair Brush \| Keratin Protect Styling Tool Discover the Hatteker HT-300, a 1000W 4-in-1 hot air hair brush for salon-quality styling. Features Keratin Protect technology for fast, hassle-free results. Includes multiple attachments for drying and styling.
	Hatteker HT-302 Auto-Rotation Hot Air Brush User Manual Comprehensive user manual for the Hatteker HT-302 Auto-Rotation Hot Air Brush, detailing its features, usage, safety precautions, and disposal information. Includes instructions for styling, changing accessories, and operation.
	Anko Rotary Shaver RSCX-7571 Instruction Manual Comprehensive instruction manual for the Anko Rotary Shaver (Model RSCX-7571), covering safety guidelines, parts identification, operating instructions, cleaning, storage, battery disposal, and warranty information.
	DINGLING RSCW-5088 Rechargeable Shaver - Product Overview Official product overview for the DINGLING RSCW-5088 rechargeable electric shaver, detailing its design and model information.