XINYI Sini Audio C50L/C100L

Contents

XINYI Sini Audio C50L/C100L Stereo Bluetooth Digital Power Amplifier Board User Manual

Models: C50L, C100L

Brand: XINYI Sini Audio

Introduction

This manual provides detailed instructions for the XINYI Sini Audio C50L and C100L Stereo Bluetooth Digital Power Amplifier Boards. These modules offer high-quality stereo audio amplification with versatile input options including Bluetooth 5.0, AUX, U disk, and USB sound card. Featuring a 360-degree stepless tuning rotary encoder and mobile app control, these amplifier boards are designed for enthusiasts and DIY audio projects. Please read this manual thoroughly before installation and operation.

Specifications

FeatureC50LC100L
Bluetooth Version5.05.0
Output Channel2.0 (Stereo)2.0 (Stereo)
Chip ModelAP3050DAP3050D
Working ModeClass DClass D
Audio InputBluetooth 5.0, AUX, U disk PlayBluetooth 5.0, AUX, U disk, USB Sound Card
Rated Output Power50W + 50W100W + 100W
Frequency Response20Hz to 20KHzNot specified (typical for Class D)
Working VoltageDC 8V to DC 26VDC 5V to DC 26V
Recommended Power VoltageDC 19VHigher voltage for greater output power
Fit Speaker Parameters4-8 Ohms4-8 Ohms, 30-300W
Dimensions (with shell)56mm * 50mm * 18mm58mm * 53mm * 18mm
Net WeightApprox. 61g70g
Transmission Distance15m (unobstructed)15m (unobstructed)
Volume AdjustmentEncoder 360-degree stepless tuningEncoder 360-degree stepless tuning
Audio OutputPassive speakerPassive speaker + 3.5mm
Output FilterFilter freeFilter free
Heat Dissipation ModeHeat sink + shellHeat sink + shell
Protection MechanismPower reverse connection, short circuit, self-recovery overheating protectionPower reverse connection, short circuit, self-recovery overheating protection

Power Output vs. Voltage (C100L)

  • 12V: 8 Ohm 12W + 12W, 4 Ohm 22W + 22W
  • 19V: 8 Ohm 28W + 28W, 4 Ohm 55W + 55W
  • 22V: 8 Ohm 37W + 37W, 4 Ohm 72W + 72W
  • 24V: 8 Ohm 51W + 51W, 4 Ohm 100W + 100W

Package Contents

The package typically includes the following components:

  • XINYI Sini Audio Amplifier Board (C50L or C100L)
  • DC Power Adapter (Free DC adapter)
  • Heat Sink (Free heat sink)
  • M2 Screws
  • M2x13 or M2x14 Copper Columns
  • Knob Cap
  • Screwdriver (for DIY kit assembly)

Note: If you purchased the DIY kit, the outer casing is a material package and requires self-assembly.

Setup Instructions

1. Assembly (for DIY Kits)

If you received a DIY kit, assemble the casing and components as follows:

  • Attach the heat sink to the chip using the provided 3M thermal adhesive tape. Ensure good contact for effective heat dissipation.
  • Mount the circuit board using the M2 screws and copper columns.
  • Install the knob cap onto the rotary encoder.
Installation diagram for the amplifier board showing screws, heat sink, copper columns, knob cap, upper cover, circuit board, and lower cover.
Figure 1: Installation Diagram (C50L)
Installation diagram for the C100L amplifier board showing M2 Screw, Heat sink, M2x14 Copper pillar, Knob cap, Upper cover, Circuit board, and Lower cover.
Figure 2: Installation Diagram (C100L)

2. Power Connection

  • Connect a DC power supply (8V-26V for C50L, 5V-26V for C100L) to the DC-IN port. A 19V DC power supply is recommended for optimal performance.
  • Ensure the power supply's current output is sufficient for your speakers (e.g., for an 8 ohm 50W speaker, use a 24V power supply with at least 4A). Insufficient current can lead to sound issues.
  • Do NOT exceed 26V, as this may damage the circuit board.

3. Speaker Connection

  • Connect your passive speakers to the SPKL (Left) and SPKR (Right) terminals. Pay attention to polarity (+ and -).
  • For active speakers, use the 3.5mm audio output jack (C100L only).
Diagram showing connections for the C50L amplifier board: DC 8-24V power supply, SPKL and SPKR for left and right passive speakers, 3.5mm audio output for active speakers, AUX IN, USB AUDIO, and the volume knob with play/pause and power functions.
Figure 3: C50L Connection Diagram
Diagram showing connections for the C100L amplifier board: DC 5-26V power supply, SPKL and SPKR for left and right passive speakers, 3.5mm audio output for active speakers, AUX IN, USB AUDIO, and the volume knob with play/pause and power functions.
Figure 4: C100L Connection Diagram

Operating Instructions

1. Power On/Off and Standby

  • Power On: Long press the volume knob to turn the device on.
  • Power Off/Standby: Long press the volume knob to put the device into standby mode (low power consumption). For complete power off, unplug the DC power adapter.

2. Volume Control and Playback

  • Volume Adjustment: Rotate the volume knob for 360-degree stepless volume tuning.
  • Play/Pause: Short press the volume knob to play or pause audio playback.
Video 1: Demonstration of sound quality, stepless tuning, and play/pause functionality using the encoder knob.

3. Audio Input Modes

The amplifier supports multiple audio input sources:

  • Bluetooth Mode: The product defaults to Bluetooth mode if no other external audio device is connected.
  • AUX Input: Insert an AUX cable into the AUX IN port. The amplifier will automatically switch to AUX playback. If an AUX cable is inserted during Bluetooth playback, it will switch to AUX immediately.
  • U Disk Playback: Insert a U disk (formatted as FAT32, max 32GB) into the USB port. The amplifier will automatically switch to U disk playback.
  • USB Sound Card Input: Connect the amplifier to a computer via the USB port. Most computers will automatically recognize it as a sound card. If not, you may need to manually select it in your computer's audio settings.

Audio input modes can also be conveniently switched via the mobile APP.

4. Bluetooth Pairing

  1. Ensure the Bluetooth board is powered on. The blue LED will flash quickly, indicating it's in Bluetooth connection mode.
  2. On your mobile phone, search for Bluetooth devices and select "XinYi" to connect.
  3. Once connected, the blue LED will enter a long light state.
  4. Start playing music on your phone. The blue LED will then flash slowly, indicating playback.
Mobile phone screen showing Bluetooth settings. The image instructs to avoid connecting to 'Sinilink-APP' directly and instead connect to 'XinYi'. It also describes the LED behavior during Bluetooth connection and playback.
Figure 5: Bluetooth Connection Steps

Mobile App Control

The amplifier supports control via the Sinilink mobile application, available for both Android and iOS systems. The app provides visual operation for playback mode, volume, sound effects, and song control.

  • Download: Search for 'Sinilink' in the Google Play Store (for Android) or Apple App Store (for iOS).
  • Permissions: When using the app, ensure all necessary app permissions are granted in your phone's settings. Failure to do so may cause compatibility issues and prevent Bluetooth connection.
  • Location Services: You must turn on the location information of your phone when using the APP for proper functionality.
Mobile phone screen showing quick settings with 'Location' highlighted, indicating it needs to be turned on when using the app.
Figure 6: Enable Location Services for App
Diagram showing the amplifier board and a smartphone with the Sinilink app interface, illustrating APP control for volume, sound effects, and song navigation.
Figure 7: Mobile APP Control Interface

Maintenance

  • Keep the amplifier board in a dry environment to prevent moisture damage.
  • Clean the board gently with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
  • For long-term storage or if not in use for an extended period, unplug the DC power adapter to completely cut off power.

Troubleshooting

1. No Sound or Weak Sound

  • Insufficient Power Supply: The output power of the power supply must be greater than the output power of the amplifier. If the current is too small (e.g., for an 8 ohm 50W speaker, a 24V power supply needs at least 4A), the sound may become stuck or weak. Increase the power supply current or reduce the volume/output power.
  • Ticking Sound: If the speaker makes a ticking sound when powered on but no audio plays, it indicates insufficient power supply. Increase the power supply.
  • "Hiccup" Phenomenon: If the music playback experiences a "hiccup" phenomenon, first check if the power supply is insufficient. A larger power supply may be needed. Secondly, it could be due to overheating protection; strengthen heat dissipation or reduce the playback volume.

2. Bluetooth Connection Issues

  • Signal Problems: The product uses a PCB antenna. The visible connection distance is up to 15 meters without obstruction. If you cannot find or connect to Bluetooth, it may be a signal problem.
  • Interference: Stay away from routers or other strong signal sources when using Bluetooth.
  • Metal Shielding: If the amplifier is placed on a metal surface, the metal may affect the PCB antenna signal. If using a metal enclosure, ensure the antenna is pulled out of the shell to prevent signal shielding.
  • App Permissions: When using the mobile app, ensure all app permissions and location services are enabled in your phone's settings.
  • Overvoltage: The power supply voltage must not exceed 26V. Voltages higher than 26V will burn the circuit board.

User Tips

  • Always ensure your power supply is adequate for your speakers to prevent sound distortion or damage. A higher current rating on your power supply is generally better, as long as the voltage is within the specified range.
  • For optimal Bluetooth performance, keep the amplifier in an open area and away from other electronic devices that might cause interference.

Warranty and Support

For any issues or questions not covered in this manual, please contact the seller or manufacturer for support. Keep your purchase records for warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.