1. Introduction and Overview
Thank you for choosing the HOMCOM Power Lift Recliner Chair. This manual provides essential information for the safe and efficient use of your new recliner. Designed for comfort and convenience, this chair features a power lift mechanism, reclining function, 8-point massage, and lumbar heating, all controlled by easy-to-use remotes. Its plush velvet-feel upholstery ensures a luxurious experience.

2. Safety Information
- Read all instructions before using the recliner.
- Keep children and pets away from the chair's moving parts.
- Ensure the power cord is not pinched or damaged.
- Do not allow liquids to spill on the controls or electrical components.
- Only use the chair on a flat, stable surface.
- Maintain a minimum distance of 19.7 inches (50 cm) from the wall when reclining to allow for full movement.
- Unplug the chair from the power outlet before cleaning or maintenance.
3. Package Contents
Verify that all components are present before assembly:
- 1 x Power Lift Recliner (main body and backrest)
- 2 x Remote Controllers (one for lift/recline, one for massage/heat)
- 1 x User Manual
4. Product Features
- Power Lift Function: Smoothly transitions from a sitting position to a 45° standing assist.
- Reclining Function: Reclines up to 150° with an integrated footrest for ultimate relaxation.
- Vibration Massage: 8-point massage system with five selectable modes.
- Lumbar Heating: Warming function for the lumbar area.
- Oversized Design: Wide headrest and generous dimensions for enhanced comfort.
- Durable Cushioning: Features a pocket spring system for shape retention and bounce, combined with foam and velvet-feel fabric.
- Convenient Controls: Two remote controllers for all functions.
- USB Charging Port: Built-in USB port on one remote for charging devices.
- Storage: Two side pockets for keeping essentials within reach.
5. Setup and Assembly
The HOMCOM Power Lift Recliner Chair requires assembly. Follow these general steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Backrest: Slide the backrest onto the base of the chair, ensuring the metal brackets align and lock securely into place. You may hear a click when it's properly seated.
- Connect Wiring: Locate the electrical cables extending from the backrest and the base. Connect them according to the color-coded or labeled connectors. Ensure all connections are firm.
- Connect Power Adapter: Plug the power adapter into the chair's main power input, then plug the adapter into a standard wall outlet.
- Position the Chair: Place the chair in its desired location, ensuring there is at least 19.7 inches (50 cm) of clear space behind it for reclining.

6. Operation
6.1 Lift and Recline Functions
Use the dedicated remote controller for lift and recline operations. This remote typically has two large buttons for movement.

- To Recline: Press and hold the 'down' button. The chair will recline backward and the footrest will extend. Release the button when you reach your desired angle, up to 150°.
- To Return to Sitting: Press and hold the 'up' button. The chair will return to an upright sitting position, and the footrest will retract.
- To Lift/Stand Assist: From the sitting position, continue to press and hold the 'up' button. The chair will gently tilt forward and lift, assisting you to a standing position (approximately 45° tilt).
6.2 Massage and Heat Functions
Use the second remote controller to activate and adjust the massage and heating features.

- Power On/Off: Press the power button (usually marked with a circle and vertical line) to turn the massage and heat functions on or off.
- Massage Modes: Cycle through the 5 available massage modes using the 'Mode' button.
- Massage Intensity: Adjust the intensity of the massage (if available) using the '+' and '-' buttons.
- Targeted Massage: Select specific massage areas (e.g., Thigh, Lumbar, Back) using the corresponding buttons on the remote. The chair features 8 massage points.
- Heating Function: Activate the lumbar heating feature by pressing the 'Heat' button. Press again to turn off.
- Timer: Set a timer for the massage/heat session (e.g., 15, 30, 60 minutes) using the timer buttons.
6.3 USB Charging Port
The remote controller for the lift and recline functions includes a built-in USB port (Output: 5V / 2A, 10W). Simply plug your device's USB charging cable into this port to charge your phone or other compatible devices while relaxing.
7. Maintenance
7.1 Cleaning
- Fabric: For general cleaning, use a soft cloth or a vacuum cleaner with a brush attachment to remove dust and debris from the velvet-feel upholstery. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for upholstery, testing on an inconspicuous area first.
- Frame and Base: Wipe down the steel frame and base with a damp cloth. Avoid abrasive cleaners.
- Electrical Components: Keep all electrical components, including remotes and power cords, dry and free from dust. Do not use liquid cleaners directly on these parts.
7.2 General Care
- Regularly check all connections and fasteners to ensure they are tight.
- Avoid exposing the chair to direct sunlight or extreme temperatures, which can damage the fabric and internal components.
- Do not sit on the armrests or footrest, as this can cause damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not move/power on. | Power cord unplugged or loose connection. | Check if the power cord is securely plugged into the wall outlet and the chair. Ensure all internal wiring connections are firm. |
| Remote control not responding. | Remote cable disconnected or damaged. | Check the remote control cable connection to the chair. Ensure the cable is not damaged. |
| Massage/Heat not working. | Massage/Heat remote not powered on or faulty. | Ensure the massage/heat remote is powered on. Check its cable connection. |
| Unusual noises during operation. | Loose components or obstruction. | Inspect the chair for any loose screws or foreign objects obstructing the mechanism. Tighten any loose fasteners. |
9. Specifications
| Feature | Detail |
|---|---|
| Model | 713-175V81GY |
| Color | Gray |
| Material | Velvet-touch Fabric (100% Polyester), Foam, Steel |
| Overall Dimensions (Upright) | 37.8" W x 39.4" D x 41.3" H |
| Overall Dimensions (Reclined) | 37.8" W x 63" D x 31.5" H |
| Overall Dimensions (Lifting) | 37.8" W x 20.9" D x 57.9" H |
| Seat Dimensions | 20.5" W x 21.3" D x 19.7" H |
| Power Cord Length | 4.4' |
| Weight Capacity | 298 lbs. |
| Input Voltage | 100-240 V, 50/60 Hz |
| Output Voltage | 29V / 2A |
| USB Output | 5V / 2A, 10W |
| Minimum Wall Clearance for Recline | 19.7" |
| Installation Method | Assembly |
| Origin | Mainland China |


10. Warranty and Support
For any questions, concerns, or issues regarding your HOMCOM Power Lift Recliner Chair, please contact the seller's customer service. Keep your purchase receipt and model number (713-175V81GY) handy for faster assistance.