1. Introduction
Thank you for choosing the SANODESK L-Shaped Electric Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read it thoroughly before use and keep it for future reference. This electric standing desk is designed to offer a flexible and ergonomic workspace, allowing you to easily switch between sitting and standing positions.
2. Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not overload the desk. Refer to the specifications for maximum weight capacity.
- Keep the power cord away from heat sources, sharp edges, and wet areas.
- Only use the provided power adapter and control panel.
- Avoid placing liquids directly on the control panel or near electrical components.
- In case of malfunction, disconnect the power immediately and contact customer support. Do not attempt to repair the desk yourself.
- The anti-collision system helps prevent damage, but always be aware of objects around the desk during height adjustments.
3. Package Contents
Please verify that all the following components are included in your package:
- L-Shaped Desktop Sections
- Desk Legs (3 units)
- Motor and Lifting Columns
- Smart Control Panel
- Power Adapter and Cable
- Hardware Kit (screws, bolts, Allen wrenches, etc.)
- Cable Management Accessories
- User Manual (this document)
4. Assembly and Setup
The SANODESK L-Shaped Standing Desk offers two assembly options to match your space and preference, allowing for either a left-sided or right-sided L-shape configuration.
Figure 1: Two Assembly Options (Left or Right L-Shape)
Figure 2: Flexible Right/Left Orientation
Follow the detailed instructions provided in the separate assembly guide (if applicable) or the included diagrams to correctly assemble your desk. Ensure all connections are secure and cables are properly managed to avoid interference with the lifting mechanism.
5. Operating Instructions
Your SANODESK L-Shaped Electric Standing Desk features a smart control panel for easy height adjustment and memory presets.
Figure 3: Smart Control Panel
5.1. Basic Height Adjustment
- Up/Down Buttons: Use the Up (▲) and Down (▼) arrow buttons to manually adjust the desk height. The current height will be displayed on the digital screen.
5.2. Memory Presets
The control panel allows you to save up to four preferred height settings.
- Adjust the desk to your desired height using the Up/Down buttons.
- Press the "M" button (or similar memory set button). The display may flash or show "S-".
- Within a few seconds, press one of the numbered preset buttons (1, 2, 3, or 4) to save the current height to that position.
- To recall a saved height, simply press the corresponding numbered preset button. The desk will automatically move to the saved position.
5.3. Anti-Collision System
The desk is equipped with an anti-collision system that detects obstacles during height adjustment and automatically reverses direction to prevent damage or injury.
Figure 4: Anti-Collision System in action
While this system provides protection, it is always recommended to keep the area around the desk clear during operation.
5.4. Silent Operation
The desk operates with a low noise level, typically less than 50dB, ensuring a quiet working environment.
Figure 5: Quiet Operation (Lifting Noise <50dB)
6. Maintenance
- Cleaning: Wipe the desk surface and legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cable Management: Regularly check and organize cables to prevent tangles and ensure smooth operation of the lifting mechanism.
- Inspections: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
- Environmental Conditions: Store and operate the desk in a dry environment. Avoid extreme temperatures and humidity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cable disconnected; Control panel error; Overload | Check power connections; Unplug and replug the desk; Reduce weight on the desk. |
| Uneven lifting | Obstruction; Unbalanced load | Clear any obstructions; Redistribute weight evenly on the desk. |
| Error code on display | System fault | Disconnect power for 10 minutes, then reconnect. If the error persists, contact customer support. |
| Anti-collision system triggers frequently | Sensitivity setting; Obstacles | Ensure the area around the desk is clear. Consult the full manual for potential sensitivity adjustments (if available). |
8. Specifications
Figure 6: Desk Dimensions
| Feature | Detail |
|---|---|
| Desk Type | L-Shaped Electric Standing Desk |
| Overall Length | 63 inches |
| Overall Width | 55.1 inches |
| Adjustable Height Range | 28.3 inches - 45.9 inches |
| Depth (Main Section) | 39.4 inches |
| Depth (Side Section) | 31.5 inches |
| Memory Presets | 4 |
| Anti-Collision System | Yes |
| Lifting Noise Level | < 50dB |
| Assembly Options | Left or Right L-shape |
| Brand | SANODESK (XMSJ) |
| Origin | US |
9. User Tips
- Ergonomic Setup: Adjust your monitor height so the top of the screen is at eye level when standing. Keep your keyboard and mouse at a comfortable height, allowing your elbows to be at a 90-degree angle.
- Vary Your Posture: Don't stay in one position for too long. Alternate between sitting and standing throughout your workday to maximize the health benefits of your adjustable desk.
- Cable Management: Utilize the included cable management accessories to keep your workspace tidy and prevent cables from getting caught during height adjustments.
- Initial Calibration: If the desk is not moving smoothly or displaying an error, try a full reset by lowering the desk to its lowest point and holding the down button for 5-10 seconds until it recalibrates.
10. Warranty and Support
For warranty information, technical support, or replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.