LS VISION LS-CS7-10X

Contents

LS VISION Solar Security Camera User Manual

Model: LS-CS7-10X

1. Safety Information & Disclaimer

Please read this manual carefully before using the product and keep it for future reference. Ensure all safety guidelines are followed to prevent damage or injury.

Disclaimer

⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

2. Package Contents

Please check that all items are present and in good condition:

  • LS VISION Solar Security Camera Unit
  • Solar Panel (integrated or separate with extension cord)
  • Universal Bracket
  • Antennas (2x)
  • Mounting Screws and Wall Plugs
  • User Manual (this document, or refer to the PDF for more details)

For a more detailed user manual, please refer to the official PDF document: LS VISION Solar Camera User Manual (PDF)

3. Product Overview

Familiarize yourself with the components of your LS VISION Solar Security Camera.

LS VISION Solar Security Camera Component Diagram

Figure 3.1: Camera Component Diagram
1. Solar Panel (with 1.8m Extension Cord)
2. Universal Bracket
3. Antenna
4. OFF/ON Switch
5. Charging Interface
6. Battery Holder
7. White Lens & Infrared Lens (Wide-angle)
8. PIR Sensor
9. PTZ Lens (Middle)
10. SIM Card Slot (for 4G cameras only)
11. Reset Button
12. TF Card Slot

PTZ Control Diagram

Figure 3.2: PTZ Control Overview
The main PTZ lens offers 0-355° horizontal and 0-100° vertical rotation. The left and right PTZ cameras support 270° pan rotation and 90° tilt adjustment.

4. Setup

4.1 Mounting the Camera

  1. Choose a suitable location for installation (side, ceiling, or normal wall mount) that provides optimal viewing angles and good sunlight exposure for the solar panel.
  2. Use the universal bracket as a template to mark drill holes on the mounting surface.
  3. Drill the holes, insert wall plugs, and secure the bracket using the provided screws.
  4. Attach the camera unit to the universal bracket. Adjust the angle as needed.
  5. Screw the two antennas onto the designated ports on the camera unit.

4.2 Power Connection

The camera is powered by an integrated solar panel and built-in batteries.

  • Ensure the solar panel is positioned to receive maximum direct sunlight throughout the day for continuous charging.
  • The camera has a built-in battery. For initial setup or if the battery is low, you can use the charging interface to fully charge the device before deployment.
  • Note on Power Sources: Do not attempt to connect external power sources (e.g., 220V/5V from a lamp post) simultaneously with the solar panel's USB power unless explicitly stated as compatible by the manufacturer. This can damage the device. Rely on the designed solar/battery system.

4.3 Network Connection (4G or WiFi Version)

Your camera comes in either a 4G or WiFi version. Please follow the instructions relevant to your model.

4.3.1 For 4G Camera Version

4G Camera Version Setup

Figure 4.1: 4G Camera Version
Requires a 4G data SIM card. Does not support WiFi connection.

  1. Insert a 4G data SIM card into the SIM Card Slot (refer to Figure 3.1). Ensure the SIM card is active and has sufficient data.
  2. Turn on the camera using the OFF/ON switch. The camera will automatically connect to the 4G network.

4.3.2 For 2.4G WiFi Camera Version

WiFi Camera Version Setup

Figure 4.2: WiFi Camera Version
Connects to a 2.4G WiFi network. Does not support 4G connection.

  1. Turn on the camera using the OFF/ON switch.
  2. Ensure your mobile device is connected to a 2.4GHz WiFi network.
  3. Proceed to app installation and pairing (Section 4.4).

4.4 App Installation & Pairing (V380 Pro)

  1. Download the 'V380 Pro' app from your smartphone's app store (Google Play Store for Android, Apple App Store for iOS).
  2. Register for an account or log in if you already have one.
  3. In the app, tap the '+' icon to add a new device.
  4. Follow the on-screen instructions to pair your camera. This usually involves scanning a QR code on the camera or connecting to the camera's temporary WiFi hotspot.
  5. Once paired, you can name your camera and begin monitoring.

5. Operating Instructions

5.1 Live View & Multi-Directional Monitoring

Open the V380 Pro app and select your camera to view the live feed. The camera features four lenses providing three distinct screens within the app for comprehensive coverage.

Four Lens Three Screen View

Figure 5.1: Four Lens Three Screen View
Monitor multiple areas simultaneously within the app interface.

Multi Directional Monitoring

Figure 5.2: Multi-Directional Monitoring
Adjust the viewing directions of the three cameras independently through the mobile app.

5.2 PTZ Control & Zoom Function

Use the PTZ controls within the V380 Pro app to adjust the camera's view.

  • PTZ Control: The main PTZ lens can rotate horizontally 0-355° and vertically 0-100°. The left and right PTZ cameras support 270° pan rotation and 90° tilt adjustment.
  • 10X Optical Zoom: The main lens supports 10X optical zoom, allowing you to view distant objects in detail. This function is controlled via the mobile app.
10X Optical Zoom Demonstration

Figure 5.3: 10X Optical Zoom
Achieve detailed views of distant objects through the mobile app.

Remote Rotation Control

Figure 5.4: Remotely Control Rotation
Adjust camera angles from anywhere using the V380 Pro app.

5.3 Humanoid Detection & Alarms

The camera features advanced humanoid detection to minimize false alarms.

  • When a human shape is detected, the camera can trigger an information alarm and a sound alarm.
  • Alarm notifications will be sent to your mobile app.
Humanoid Detection Alarm

Figure 5.5: Humanoid Detection
Receive alerts when a person enters the monitoring area.

5.4 Automatic Tracking

The middle lens of the camera supports automatic tracking of moving subjects.

Automatic Tracking Feature

Figure 5.6: Automatic Tracking
The middle lens can automatically follow detected movement.

5.5 Two-Way Audio

The camera is equipped with a built-in microphone and speaker, enabling two-way voice intercom.

  • Use the 'Speak' function in the app to communicate with people near the camera.
  • You can also hear audio from the camera's vicinity.
Two-Way Voice Intercom

Figure 5.7: Two-Way Voice Intercom
Communicate directly through the camera using the app.

5.6 Night Vision Modes

The camera offers both infrared and full-color night vision capabilities.

  • Infrared Night Vision: Provides clear black-and-white images in low-light conditions.
  • Full Color Night Vision: In white light mode, when the camera detects a moving object, it will automatically turn on the white light and start recording in full color.
Full Color Night Vision

Figure 5.8: Night Vision Modes
Switch between infrared and full-color night vision as needed.

5.7 Recording & Playback

The camera supports video recording and playback through two methods:

  • TF Card Storage: Insert a TF (microSD) card (up to 128GB supported) into the TF Card Slot (refer to Figure 3.1) for local video storage.
  • Cloud Storage: A paid subscription service is available for cloud-based video storage.

You can replay recorded videos at any time through the V380 Pro app.

Video Playback Options

Figure 5.9: Replay Video at Any Time
Access recordings from TF card or cloud storage via the app.

5.8 Preset Point Settings

All three cameras support preset position functions, allowing you to quickly view important areas.

  • In the app, navigate to the PTZ controls and find the 'Preset' option.
  • Move the camera to your desired position and save it as a preset point.
  • You can then quickly jump to these saved positions with a single tap.
Preset Point Settings

Figure 5.10: Preset Point Settings
Define and quickly access specific monitoring areas.

5.9 Device Sharing

After setting up the camera in the main account, you can share access with multiple family members.

  • In the V380 Pro app, go to the camera settings and look for the 'Share Device' or 'Device Sharing' option.
  • You can typically share access by generating a QR code or sending an invitation to other V380 Pro users.
Device Sharing Feature

Figure 5.11: Device Sharing
Allow multiple family members to view and control the camera.

5.10 Adaptive Power Mode

The camera features an adaptive power mode to optimize battery life.

  • Normally, the camera records continuously.
  • When the battery level is low, it will automatically switch to a human body sensing alarm recording mode to conserve power.
  • In this mode, the camera enters a sleep state and will only wake up and record when motion is detected.
Adaptive Power Mode

Figure 5.12: Adaptive Power Mode
Balances continuous recording with battery life optimization.

5.11 Product Demonstration Video

Video 5.1: LS VISION Solar Camera Product Overview
A short demonstration of the camera's features and capabilities.

6. Maintenance

6.1 Cleaning

  • The camera is IP66 waterproof, dustproof, and UV-resistant, designed for outdoor use.
  • Periodically wipe the camera lenses and solar panel with a soft, damp cloth to remove dust and debris. This ensures optimal image quality and solar charging efficiency.
  • Do not use harsh chemicals or abrasive cleaners.
IP66 Waterproof

Figure 6.1: IP66 Waterproof Rating
Ensures durability against outdoor elements.

6.2 Battery Care

  • Ensure the solar panel is always exposed to direct sunlight for optimal charging.
  • In prolonged periods of low sunlight, the camera's adaptive power mode will help conserve battery. If necessary, you can manually charge the camera via its charging interface.
Solar Energy Charging

Figure 6.2: Solar Energy Charging
Provides uninterrupted power all day and night.

7. Troubleshooting

  • Camera Not Connecting to App:
    - Ensure the camera is powered on.
    - For WiFi versions, confirm your router is 2.4GHz and your phone is connected to the same network during pairing.
    - For 4G versions, verify the SIM card is active, has data, and is inserted correctly.
    - Try resetting the camera using the reset button (refer to Figure 3.1) and re-pairing.
  • Memory Card Not Working/Recording:
    - Ensure the TF card is inserted correctly and fully.
    - Check if the TF card is formatted correctly (usually FAT32). You might need to format it via the app or on a computer.
    - Verify the TF card capacity is supported (up to 128GB). Some users reported receiving incorrect capacity cards; verify the actual capacity.
  • Poor Image Quality:
    - Ensure the camera lenses are clean and free from dust or smudges.
    - Check your network signal strength (4G or WiFi). A weak signal can affect streaming quality.
    - Adjust video resolution settings in the V380 Pro app if available.
  • Pink Tint in Image (Main Camera):
    - This could indicate an issue with the IR-cut filter. Try restarting the camera. If the problem persists, contact support.
  • Short Battery Life:
    - Ensure the solar panel is receiving adequate direct sunlight daily.
    - Reduce motion detection sensitivity or frequency of alerts if the camera is in a high-traffic area.

8. Specifications

FeatureSpecification
Brand NameLS VISION
Model NumberLS-CS7-10X
Clarity1080p
ConnectivityWiFi, 4G
Lens (mm)4mm
Focal Length4mm
Viewing Angle360° (overall PTZ capability)
SensorCMOS
Sensor Size1/2.7"
InstallationSide, Ceiling, Normal
TechnologyInfrared, Pan / Tilt / Zoom
Audio Output1CH RCA (Two-Way Voice Intercom)
Supported Mobile SystemsiOS, Android
Supported Operating SystemsNo (Mobile App only)
Power SupplyNormal (Solar Energy, Built-in 8000mAh Batteries)
Solar Panel8 watt
White Light DistanceIR distance 20 meters
Alarm TypeLocal Alarm (Humanoid Detection, Sound Alarm)
Waterproof RatingIP66
APPV380 Pro
CertificationCE
OriginMainland China

9. User Tips

  • Easy Setup: Many users find the initial setup process straightforward and the picture quality impressive.
  • Verify Memory Card: If you order a specific memory card capacity, double-check the actual capacity upon arrival to ensure it matches your order.
  • Optimal Solar Placement: For best performance and continuous operation, ensure the solar panel receives maximum direct sunlight throughout the day.
  • App Experience: The V380 Pro app is essential for full functionality. Ensure you have a stable internet connection for optimal app performance.
  • Image Quality Expectations: While generally good, individual lens performance can vary. The main camera's image quality might differ from the side cameras.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the seller's official channels or contact their customer service directly. Keep your purchase records handy for any warranty claims.

© 2024 LS VISION. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.