1. Introduction
The Satlink WS-6980 is a versatile and powerful COMBO Satellite Finder Meter designed for precise installation and alignment of satellite, terrestrial, and cable TV systems. Featuring a 7-inch high-definition TFT LCD screen, it supports DVB-S/S2, DVB-T/T2, and DVB-C standards, along with advanced functions like spectrum analysis, constellation analysis, and optical power detection. This manual provides essential information for safe and effective use of your device.
Figure 1: Satlink WS-6980 Device Overview
2. Safety Information
- Always use the provided power adapter. Using an incorrect adapter may damage the device or cause fire.
- Do not expose the device to rain, moisture, or extreme temperatures.
- Avoid dropping the device or subjecting it to strong impacts.
- Ensure proper ventilation to prevent overheating.
- Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
- The device features LNB, ANT, and DC12V short protection. However, always ensure connections are correct before powering on.
3. Package Contents
Verify that all items are present in your package:
- Satlink WS-6980 Main Unit
- Power Adapter (DC12V/1.5A)
- AV Cable
- Car Charger Cable
- Protective Silicone Case
- User Manual (on CD or printed)
Figure 2: Included Accessories
4. Device Overview
4.1 Front Panel
Figure 3: Front Panel Controls and Display
- 7-inch TFT LCD Screen: High-definition display for signal analysis and menu navigation.
- Directional Buttons (OK, MENU, EXIT): For navigating menus and confirming selections.
- Numeric Keypad (0-9): For direct input.
- Function Buttons (AVS, F1-F4, TTX, REC, AUDIO, MUTE, INFO): Dedicated buttons for various features and settings.
- Status Indicators (POWER, LNB, ANT, LOCK, CHG): LEDs indicating power, LNB/Antenna connection, signal lock, and charging status.
4.2 Top Panel (Ports)
Figure 4: Top Panel Ports
- LNB IN: F-type connector for satellite LNB input.
- ANT IN: F-type connector for terrestrial/cable antenna input.
- DC OUT: 12V DC output for powering external devices.
- HDMI OUT: HDMI output for connecting to an external display.
- USB Port: For software upgrades and data transfer.
- Power Switch: Main power on/off.
4.3 Bottom Panel
Figure 5: Bottom Panel
- Speakers: Stereo audio output.
- Battery Compartment: Houses the 7.4V/5000mAh Li-ion battery.
5. Specifications
| Category | Parameter | Value |
|---|---|---|
| General | Screen | 7 Inch High Definition TFT LCD (1024*600) |
| Compliance | Fully DVB-S/S2, T/T2/C, MPEG-2/MPEG-4 compliant | |
| Hardware Decoding | MPEG-2 / MPEG-4 H.264 | |
| Satellite Input/Demodulation | Connector Type | F Type |
| Input Frequency | 950 to 2150 MHz | |
| Signal Input Level | -65 to -25 dBm | |
| LNB Supply | 13V/18V, Imax 400mA | |
| DVB-T/T2/C Input/Demodulation | Input Frequency | 48 to 862 MHz |
| ANT Supply | 5V, 12V/24V Imax 100mA | |
| Demodulation Type | OPSK, 16PAM, 64QAM, 256QAM | |
| LCD Features | LCD Type | TFT Transmissive |
| Number of Dots | 800 x 3(RGB) x 480 | |
| Active Area (WxH) | 154.08mm x 85.92 mm | |
| Microprocessor | Processor | NOVATEK |
| Clock Frequency | 500MHz | |
| SDRAM Memory | 1Gbit DDR3 | |
| Power Supply | Li-ion Battery | 7.4V/5000mAh |
| Adapter Output | DC12V/1.5A | |
| Power Consumption | Max. 10W | |
| Physical Characteristics | Size (W x D x H) | 250mm x 156mm x 40mm |
| Net Weight | 1Kg |
6. Setup Instructions
6.1 Charging the Battery
Before first use, fully charge the device. Connect the provided power adapter to the DC IN port on the device and plug it into a wall outlet. The 'CHG' indicator will light up during charging and turn off when fully charged.
6.2 Connecting to Satellite Dish (DVB-S/S2)
- Ensure the device is powered off.
- Connect the LNB cable from your satellite dish to the 'LNB IN' port on the top of the WS-6980.
- Power on the device.
Figure 6: Connecting to a Satellite Dish
6.3 Connecting to Terrestrial/Cable Antenna (DVB-T/T2/C)
- Ensure the device is powered off.
- Connect your terrestrial or cable antenna cable to the 'ANT IN' port on the top of the WS-6980.
- Power on the device.
6.4 Connecting to an External Display (Optional)
You can connect the WS-6980 to a larger screen for better viewing:
- HDMI: Use an HDMI cable to connect the 'HDMI OUT' port on the device to your TV or monitor's HDMI input.
- AV: Use the provided AV cable to connect the 'AV OUT' port (if available, typically via a multi-port adapter) to your TV's AV input.
Figure 7: Connecting to a Television
7. Operating Instructions
7.1 Powering On/Off
Toggle the power switch located on the top panel to turn the device on or off.
7.2 Menu Navigation
- Press the MENU button to access the main menu.
- Use the directional arrows (UP/DOWN/LEFT/RIGHT) to navigate through menu options.
- Press OK to confirm a selection or enter a sub-menu.
- Press EXIT to go back to the previous menu or exit the menu entirely.
7.3 Signal Search and Analysis
From the main menu, select the desired mode (DVB-S/S2, DVB-T/T2, or DVB-C). You can then:
- Scan Modes: Perform Auto, Manual, or NIT scans (for DVB-S/S2) or Blind scans (for DVB-S/S2/C) to find channels.
- Signal Strength/Quality: The screen will display real-time signal strength and quality indicators. Adjust your antenna/dish until optimal levels are achieved. The 'LOCK' indicator will illuminate when a signal is locked.
- Spectrum Analyzer: Use this feature to visualize the signal spectrum, aiding in identifying interference or optimizing signal reception.
- Constellation Analyzer: Provides a visual representation of the signal's modulation, useful for advanced signal diagnostics.
- Multiple CH/TP Detection: Allows for detection and analysis of multiple channels or transponders.
7.4 DiSEqC Control
The device supports DiSEqC 1.0/1.1/1.2 and 0/22kHz Tone for controlling multi-LNB systems or motorized dishes. Configure these settings in the satellite setup menu as required by your installation.
7.5 Optical Power Detection
The WS-6980 includes optical power detection capabilities. Refer to the on-screen instructions or the detailed manual for specific usage of this feature, typically involving connecting an optical fiber to a dedicated port (if present and not explicitly shown in images, assume it's an internal function or requires an adapter).
7.6 Electronic Compass
Utilize the built-in electronic compass for initial alignment of satellite dishes, providing guidance on azimuth (AZ) and elevation (EL) angles.
7.7 Flashlight
Activate the built-in flashlight for working in low-light conditions.
8. Software Update
The device's software can be upgraded via the USB port. Visit the manufacturer's website for the latest firmware and instructions. Typically, you will download the firmware file, copy it to a USB drive, connect the drive to the WS-6980, and initiate the update from the system settings menu.
9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or solvents.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to about 50% and store in a cool, dry place.
- Storage: Store the device in its protective case when not in use to prevent damage.
10. Troubleshooting
- Device does not power on: Ensure the battery is charged or the power adapter is correctly connected. Check the power switch.
- No signal detected: Verify all cable connections (LNB/ANT IN) are secure. Check LNB/antenna functionality. Ensure correct satellite/transponder settings are selected in the menu.
- Poor signal quality: Adjust the satellite dish or terrestrial antenna alignment slowly and precisely while observing the signal quality indicators on the screen. Check for obstructions.
- Screen frozen or unresponsive: Try restarting the device. If the issue persists, a firmware update might be necessary.
- Audio issues: Check volume settings and ensure external speakers (if used) are connected correctly.
11. User Tips
- When aligning a satellite dish, make small, slow adjustments to the dish's azimuth and elevation while monitoring the signal strength and quality on the meter.
- Utilize the spectrum analyzer to identify potential interference sources that might be degrading your signal.
- Always ensure the correct LNB type and frequency settings are selected in the device's menu for accurate satellite signal detection.
- Keep the firmware updated to ensure optimal performance and access to new features or bug fixes.
12. Warranty and Support
The Satlink WS-6980 comes with a 1-year warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For technical support, warranty claims, or any questions regarding your device, please contact customer service:
- WhatsApp: +86 15244291916
- Email: 773875441@qq.com
